150141YV73100

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties Unit PDiss V Test conditions 72 mW Power Dissipation (Yellow) PDiss Y 72 mW Peak Forward Current IF Peak duty/ 10 @ 1 kHz Continuous Forward Current 3 1 4 2 0,5 1 1,5 1,9 ±0,2 0,8 typ. Reverse Voltage 0,9 3 4,6 1,6 2,3 2 2,2 ±0,2 0,63 typ. 4 Value Power Dissipation (Bright Green) 100 mA IF 30 mA VREV 5 V Optical Properties: Chip Technology AlInGaP Emitting Color Yellow & Bright Green Lens Type 3,5 ±0,2 3,2 ±0,2 Top LED 1,9 ±0,2 0,15 typ. Scale - 8:1 Schematic: General Information: Operating Temperature Polarity Mark 1 4 2 2,8 ±0,2 3 3 4 Y V + 1 + 2 -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 up to +85 °C Moisture Sensitivity Level (MSL) 3 O 2,4 ±0,2 Scale - 8:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE LiDo 002.001 2022-06-07 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBTW SMT Bi-color TOP LED Waterclear ORDER CODE 150141YV73100 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Test conditions Viewing Angle: Value min. typ. max. Unit Peak Wavelength (Bright Green) λPeak V 20 mA 572 nm Peak Wavelength (Yellow) λPeak Y 20 mA 592 nm Dominant Wavelength (Bright Green) λDom V 20 mA 570 nm Dominant Wavelength (Yellow) λDom Y 20 mA 590 nm 60 mcd Luminous Intensity (Bright Green) IV V Luminous Intensity (Yellow) IV Y 20 mA Forward Voltage (Bright Green) VF V 20 mA 2 2.4 V Forward Voltage (Yellow) VF Y 20 mA 2 2.4 V 20 mA 40 0° - 60° 10° 100 Δλ V Spectral Bandwidth (Yellow) Δλ Y 20 mA Reverse Current IREV 5V Viewing Angle Phi 0° 20 mA 2θ50% 20 mA 220 10 nm 15 nm 10 120 Certification: 20° mcd µA ° 30° 90 Relative Luminous Intensity (%) Spectral Bandwidth (Bright Green) 200 40° 80 45° 70 50° 60 50 60° 40 70° 30 20 RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [IEC 61249-2-21] Halogen Free Conform [JEDEC JS709B] 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE LiDo 002.001 2022-06-07 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBTW SMT Bi-color TOP LED Waterclear ORDER CODE 150141YV73100 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 35 30 100 25 Forward Current [mA] Relative Intensity [%] 80 60 40 20 15 20 10 0 400 450 500 550 600 Wavelength [nm] 650 700 750 5 0 0,0 0,5 1,0 1,5 2,0 2,5 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE LiDo 002.001 2022-06-07 DIN ISO 2768-1m 3,0 3,5 4,0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBTW SMT Bi-color TOP LED Waterclear ORDER CODE 150141YV73100 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Luminous Intensity vs. Forward Current: Derating Curve: 500 40 450 35 400 30 Forward Current [mA] Luminous Intensity [mcd] 350 300 250 200 150 25 20 15 10 100 5 50 0 0 20 40 60 80 100 0 0 5 10 15 20 Forward Current [mA] 25 30 35 Ambient Temperature [°C] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE LiDo 002.001 2022-06-07 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBTW SMT Bi-color TOP LED Waterclear ORDER CODE 150141YV73100 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] D0 P2 P0 K0 T W3 E1 A Packaging Specification - Reel: [mm] W1 close to center E2 B0 D1 A A N W F D B C P1 A0 T2 Polarity Mark Feeding direction End T1 Start Top Cover Tape W2 Carrier Tape detail B Cover Tape B Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min.100mm Embossment Cover Tape min. 400mm packaging is reffered to the international standard IEC 60286-3:2013 A0 typ. 3,02 B0 typ. 3,84 W +0,3/ -0,1 8,0 T ref. 0,25 T1 max. 0,1 T2 typ. 2,23 K0 typ. 0,91 P0 ±0,1 4,0 P1 ±0,1 4,0 P2 ±0,05 2,0 D0 +0,1/ -0,0 1,5 D1 min. 0,3 E1 ±0,1 1,75 E2 min. 6,25 F ±0,05 3,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 2000 165° - 180° Tolerance Value A (mm) ± 2,0 178 B (mm) min. 1.5 C (mm) min. 12.8 D (mm) min. 20.2 N (mm) min. 50 W1 (mm) +1,5 8.4 W2 (mm) max. 14.4 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE LiDo 002.001 2022-06-07 DIN ISO 2768-1m W3 (mm) min. 7.9 W3 (mm) max. 10.9 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBTW SMT Bi-color TOP LED Waterclear ORDER CODE 150141YV73100 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³