150283BS73103

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties Test conditions Value Unit 630 mW 300 mA IF 180 mA VREV 5 V ESD Threshold/ Human Body Model VESD HBM 1000 V Absolute Thermal Resistance Junction to Solder Point RθJS 60 °C TJ 110 °C Power Dissipation PDiss Peak Forward Current IF Peak Continuous Forward Current 1 Reverse Voltage 2 1 2,1 2 0,92 ±0,05 0,4 1,99 ±0,05 2,1 Junction Temperature duty/ 10 @ 1 kHz 1,0 Optical Properties: Scale - 10:1 Chip Technology InGaN 3,5 ±0,05 Blue Lens Type 0,8 ±0,05 0,5 ±0,05 Emitting Color Schematic: Waterclear Plastic Housing Color White General Information: Polarity Mark 1 2 2,8 ±0,05 Operating Temperature + 1 2 40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 up to +100 °C Moisture Sensitivity Level (MSL) 3 Scale - 10:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.002 2023-07-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMTW SMT Mono-color TOP LED Waterclear ORDER CODE 150283BS73103 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2835 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Test conditions Viewing Angle: Value min. typ. Peak Wavelength λPeak 150 mA Dominant Wavelength λDom 150 mA Luminous Flux ΦV 150 mA Forward Voltage VF 150 mA 3.2 Spectral Bandwidth Δλ 150 mA 30 Reverse Current IREV 5V Viewing Angle Phi 0° 2θ50% 150 mA 8 max. Unit 463 nm 467 nm 12 lm 3.5 nm 10 120 V µA ° 0° -60 10° 100 Certification: 20° 30° RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [IEC 61249-2-21] Halogen Free Conform [JEDEC JS709B] Relative Luminous Intensity (%) 90 40° 80 45° 70 50° 60 60° 50 40 70° 30 20 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.002 2023-07-24 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMTW SMT Mono-color TOP LED Waterclear ORDER CODE 150283BS73103 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2835 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 300 280 260 240 100 220 Forward Current [mA] Relative Intensity [%] 80 60 40 20 200 180 160 140 120 100 80 0 400 450 500 550 600 Wavelength [nm] 650 700 750 60 40 20 0 0,0 0,5 1,0 1,5 2,0 2,5 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.002 2023-07-24 DIN ISO 2768-1m 3,0 3,5 4,0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMTW SMT Mono-color TOP LED Waterclear ORDER CODE 150283BS73103 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2835 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Luminous Flux vs. Forward Current: Derating Curve: 200 20 180 18 160 16 140 Forward Current [mA] Luminous Flux [lm] 14 12 10 8 120 100 80 60 6 40 4 20 2 0 0 20 40 60 80 100 0 0 50 100 150 200 Forward Current [mA] 250 Ambient Temperature [°C] 300 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.002 2023-07-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMTW SMT Mono-color TOP LED Waterclear ORDER CODE 150283BS73103 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2835 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 W3 T W1 close to center E1 D0 A W F N D B B0 E2 C Top Cover Tape D1 A P1 W2 T1 A0 T2 End Polarity Mark Feeding direction Start Carrier Tape detail B B Cover Tape Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min.100mm Embossment Cover Tape min. 400mm tolerance value A0 typ. 3,02 B0 typ. 3,84 W +0,3/ -0,1 8,00 T ref. 0,2 T1 max. 0,10 T2 typ. 1,05 K0 typ. 0,95 P0 ±0,1 4,00 P1 ±0,1 4,00 P2 ±0,05 2,00 D0 +0,1/ -0,0 1,50 D1 min. 0,30 E1 ±0,1 1,75 E2 min. 6,25 F ±0,05 3,50 Tape type 2a Polystyrene Packaging unit pcs. 4000 165° - 180° A (mm) ± 2,0 178 B (mm) min. 1.5 C (mm) min. 12.8 D (mm) min. 20.2 N (mm) min. 50 W1 (mm) +1,5 8.4 W2 (mm) max. 14.4 W3 (mm) min. 7.9 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.002 2023-07-24 DIN ISO 2768-1m W3 (mm) max. 10.9 Material Polystyrene/ Polyurethane PROJECTION METHOD DESCRIPTION Pull-off force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SMTW SMT Mono-color TOP LED Waterclear ORDER CODE 150283BS73103 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2835 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³