Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
0,6 ±0,2
Test conditions
Power Dissipation
PDiss
Peak Forward Current
IF Peak
2
1
2
0,8
1,6
0,8
mW
100
mA
IF
30
mA
5
V
ESD Threshold/ Human Body
Model
VESD HBM
2000
V
Absolute Thermal Resistance
Junction to Solder Point
RθJS
180
K/W
TJ
98
°C
Junction Temperature
3,0 ±0,2
Unit
78
VREV
Reverse Voltage
1,6
1
1,4 ±0,2
Continuous Forward Current
duty/ 10 @ 1 kHz
Value
Optical Properties:
2,7 ±0,2
1,3 ±0,2
Scale - 10:1
Chip Technology
AlInGaP
Emitting Color
Schematic:
Bright Green
Lens Type
Waterclear
Plastic Housing Color
White
General Information:
Operating Temperature
Polarity Mark
2
2,0 ±0,2
1
1
+
2
-40 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +100 °C
Moisture Sensitivity Level (MSL)
3
Scale - 10:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.000
2021-03-03
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150302VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3020
eiPal
Valid
1/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Properties
Test conditions
Peak Wavelength
λPeak
20 mA
Dominant Wavelength
Viewing Angle:
Value
min.
typ.
572
λDom
20 mA
Luminous Intensity
IV
20 mA
Forward Voltage
VF
20 mA
2
Spectral Bandwidth
Δλ
20 mA
15
Reverse Current
IREV
5V
Viewing Angle Phi 0°
2θ50% 20 mA
max.
40
Unit
nm
570
nm
70
mcd
2.6
nm
10
120
V
µA
°
0°
60°
10°
100
Certification:
20°
30°
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform [(EC)1907/2006]
Halogen Free
Conform or declared [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
Relative Luminous Intensity (%)
90
40°
80
70
50°
60
50
60°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.000
2021-03-03
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150302VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3020
eiPal
Valid
2/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Luminous Intensity vs. Forward Current:
120
110
100
100
90
Luminous Intensity [mcd]
Relative Intensity [%]
80
60
40
20
0
400
450
500
550
600
Wavelength [nm]
650
700
750
80
70
60
50
40
30
20
10
0
0
5
10
15
20
25
Forward Current [mA]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.000
2021-03-03
DIN ISO 2768-1m
30
35
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150302VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3020
eiPal
Valid
3/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Forward Current vs. Forward Voltage:
Derating Curve:
35
30
30
25
Forward Current [mA]
Forward Current [mA]
25
20
15
20
15
10
10
5
5
0
0
10
20
0
0,0
0,5
1,0
1,5
2,0
2,5
Forward Voltage [V]
3,0
3,5
30
40
50
60
70
80
90
Ambient Temperature [°C]
4,0
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.000
2021-03-03
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150302VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3020
eiPal
Valid
4/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
P0
T
W1
close to center
B
W
F
A
N
P2
E1
D0
D
A
W3
K0
B0
E2
C
W2
Top Cover
Tape
P1
D1
A
T1
A0
T2
End
Feeding direction
Polarity Mark
Start
detail B
Carrier Tape
B
Cover Tape
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
Embossment
No Component
min.100mm
Cover Tape
min. 400mm
Tape Type
2a
A0
(mm)
typ.
2,15
B0
(mm)
typ.
3,20
W
(mm)
+0,3/ -0,1
8,00
T
(mm)
ref.
0,258
T1
(mm)
ref.
0,10
T2
(mm)
typ.
1,75
K0
(mm)
typ.
1,50
P0
(mm)
±0,1
4,00
P1
(mm)
±0,1
4,00
P2
(mm)
±0,05
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
0,30
E1
(mm)
±0,1
1,75
E2
(mm)
min.
6,25
F
(mm)
±0,05
3,50
Material
Qty.
(pcs.)
Polystyrene
3000
165° - 180°
A
(mm)
± 2,0
178
B
(mm)
min.
1.5
C
(mm)
min.
12.8
D
(mm)
min.
20.2
N
(mm)
min.
50
W1
(mm)
+1,5
8.4
W2
(mm)
max.
14.4
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PLD
002.000
2021-03-03
DIN ISO 2768-1m
W3
(mm)
min.
7.9
W3
(mm)
max.
10.9
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMTW SMT Mono-color TOP
LED Waterclear
ORDER CODE
150302VS73100
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3020
eiPal
Valid
5/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
Ts min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
Liquidous Temperature
tL
Preheat Area
TC –5°C
Value
Preheat Temperature Min
max. 60 - 120 seconds
3 °C/ second max.
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³