150353BS74500

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 3,25 ±0,15 4,0 3,25 0,48 1,30 Peak Forward Current duty/ 10 @ 1 kHz Continuous Forward Current 3,25 Thermal pad 0,77 ±0,15 Unit PDiss 2.66 W IF Peak 1000 mA IF 1000 mA VREV 5 V ESD Threshold/ Human Body Model VESD HBM 8000 V Absolute Thermal Resistance Junction to Solder Point RθJS 8 K/W TJ 150 °C Junction Temperature O 2,6 ±0,15 3,4 ±0,15 Value Reverse Voltage Optical Properties: Scale - 8:1 2,1 ±0,15 0,48 ±0,15 Test conditions Power Dissipation 0,50 2 1 3,25 ±0,15 1,3 ±0,15 Chip Technology InGaN Emitting Color Schematic: Blue Lens Type Dome Lens Waterclear General Information: Operating Temperature -40 °C up to +125 °C Storage Conditions 3,4 ±0,15 1 + 2 -40 °C up to +125 °C, 60% RH max. Moisture Sensitive Level MSL 2 Protection device Polarity Mark (Cathode) Scale - 8:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 1/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Viewing Angle: Value Properties Test conditions Peak Wavelength 350 mA λPeak Dominant Wavelength 350 mA λDom Luminous Flux 350 mA ΦV Forward Voltage 350 mA VF Spectral Bandwidth 350 mA Δλ 20 nm Viewing Angle Phi 0° 350 mA 2θ50% 125 ° min. 20 typ. max. Unit 455 nm 460 nm 25 3.2 lm 3.8 V 0° - 62,5° 10° 100 20° 30° Relative Luminous Intensity (%) 90 40° 80 45° 70 50° 60 50 60° 62,5° 40 70° 30 20 80° 10 90° -90 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com -45 0 10 20 CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m 30 40 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 2/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 1000 100 800 Forward Current [mA] Relative Intensity [%] 80 60 40 600 400 20 0 400 450 500 550 600 650 700 750 200 Wavelength [nm] 0 0.0 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com 0.5 1.0 1.5 2.0 2.5 Forward Voltage [V] CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m 3.0 3.5 4.0 PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 3/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Luminous Intensity vs. Forward Current: Junction Temperature vs. Dominant Wavelength: 60 6.0 5.0 50 4.0 Relative Wavelength Change Δλd [nm] Luminous Flux [lm] 40 30 20 10 0 3.0 2.0 1.0 0.0 -1.0 -2.0 0 200 400 600 Forward Current [mA] 800 1000 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com -10 0 10 20 30 40 50 60 70 80 Junction Temperature [C] CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m 90 100 110 120 PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 4/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Junction Temperature vs. Luminous Intensity: Junction Temperature vs. Forward Voltage: 120 0.3 115 0.2 0.1 105 Relative Fotrward Voltage[V] Relative Luminous intensity [%] 110 100 95 90 0 -0.1 -0.2 85 80 -0.3 -10 0 10 20 30 40 50 60 70 80 Junction Temperature [C] 90 100 110 120 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com -10 0 10 20 30 40 50 60 70 80 Junction Temperature [C] CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m 90 100 110 120 PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 5/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Derating Curve: 1.1 1.0 0.9 Forward Current [A] 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 25 50 75 100 125 Ambient Temperature [˚C] 150 Rj-a = 40 ˚K/W Rj-a = 30 ˚K/W Rj-a = 20 ˚K/W Rj-a = 10 ˚K/W 175 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 6/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 A K0 P2 T W3 E1 D0 W1 close to center B0 A C Top Cover Tape D1 A P1 W2 T1 A0 T2 Cathode Mark End N W E2 F D B Start Feeding direction Carrier Tape Cover Tape No Component min.160mm Components No Component min.100mm Cover Tape min. 400mm Tolerance Tape width packaging is reffered to the international standard IEC 60286-3:2013 tolerance size 150353xS75400 A0 B0 W typ. typ. +0,3/ -0,1 3,8 3,8 12,0 T T1 T2 K0 P0 P1 P2 D0 ref. max. typ. typ. ±0,1 ±0,1 ±0,05 +0,1/ -0,0 0,25 0,1 2,55 2,2 4,0 8,0 2,0 1,5 D1 E1 E2 F Tape Type 2a min. ±0,1 min. ±0,05 1,5 1,75 10,25 5,5 Polystyrene Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions 165° - 180° Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com Pull-of force Tape width 12 mm 0,1 N - 1,3 N VPE / packaging unit pcs. 1000 12 mm A ± 2,0 178,00 B min. 1,50 C min. 12,80 CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m D min. 20,20 N min. 50,00 W1 + 2,0 12,40 W2 max. 18,40 W3 min. 11,90 W3 max. 15,40 PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 7/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max TC –5°C Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Ts min max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature tL Preheat Area Value Preheat Temperature Min TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp see table Time within 5°C of actual peak temperaure tp max. 10 seconds Ramp-down Rate (TL to TP) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature: 25 Time 25°C to Peak Time Properties Volume mm³ 2000 PB-Free Assembly | Package Thickness < 1.6 mm 260 °C 260 °C 260 °C PB-Free Assembly | Package Thickness 1.6 mm - 2.5 mm 260 °C 250 °C 245 °C PB-Free Assembly | Package Thickness ≥ 2.5 mm 250 °C 245 °C 245 °C Applied cycles 2 cycles max. refer to IPC/ JEDEC J-STD-020E Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 8/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Cautions and Warnings: The following conditions apply to all goods within the product series of WL-SMDC of Würth Elektronik eiSos GmbH & Co. KG: General: • It is also recommended to return the LEDs to the original moisture proof bag and reseal the moisture proof bag again. • Certain LED surfaces consist of soft material. Pressure on the top surface has to be handeled carefully to prevent negative influence to the function and reliability of the LEDs. • ESD prevention methods need to be applicated for manual handling and processing by machinery. • Resistors for protection are obligatory. • Luminaires in operation could harm human vision or skin on a photo-biological level, therefore direct light impact has to be avoided. All products are additionally certified as risk groups 0 to 2 according to DIN EN 62471:2008 All recommendations according to the general technical specifications of the data sheet have to be complied with. The usage and operation of the product within ambient conditions, which probably alloy or harm the component surface, has to be avoided. If the product is potted in customer applications, the potting material might shrink during and after hardening. The product is exposed to the pressure of the potting material with the effect that the LED body, pins or termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endangered to be affected. After the potting material is cured, the LED body, pins or termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred. The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply to customer specific products. Washing varnish agent that is used during the production to clean the customer application might damage or change the characteristics of the LED body, pins or termination. The washing varnish agent could have a negative effect on the long term function of the product. Direct mechanical impact to the product shall be prevented as the material of the LED body, pins or termination could flake or in the worst case it could break. The standard deliveries include values in the range and limitation as defined in the Electrical & Optical Properties specified in the datasheet. On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward voltage. In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered. Please contact us in advance, if you need a particular bin sorting before placing your order to clarify the lead time, MOQ and pricing. Product specific: Follow all instructions mentioned in the data sheet, especially: • The soldering profile has to be complied with according to the technical reflow/ or wave soldering specification, otherwise this will void the warranty. • All products shall be used before the end of the period of 12 months based on the product date code, if not a 100% solderability can´t be ensured. • Violation of the technical product specifications such as exceeding the absolute maximum ratings will void the warranty. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 9/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Important Notes 6. Product Life Cycle The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 1. General Customer Responsibility Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not. 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 7. Property Rights All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 8. General Terms and Conditions Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com. 3. Best Care and Attention Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CREATED CHECKED GENERAL TOLERANCE KaS ZAn DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WL-SMDC SMD Mono-color Ceramic LED Waterclear ORDER CODE 150353BS74500 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 3535 002.000 Valid 2017-12-15 eiPal 10/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.