Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
3,25 ±0,15
4,0
3,25
0,48
1,30
1,3 ±0,15
0,50
3,25
2
IF Peak
0,77 ±0,15
duty/ 10 @ 1 kHz
Unit
2.1
W
1000
mA
IF
700
mA
5
V
ESD Threshold/ Human Body
Model
VESD HBM
8000
V
Absolute Thermal Resistance
Junction to Solder Point
RθJS
10
K/W
TJ
125
°C
Optical Properties:
Scale - 8:1
2,1 ±0,15
O 2,6 ±0,15
Value
VREV
Junction Temperature
Thermal pad
3,4 ±0,15
Peak Forward Current
Reverse Voltage
1
0,48 ±0,15
PDiss
Continuous Forward Current
3,25 ±0,15
2
1
Test conditions
Power Dissipation
Chip Technology
AlInGaP
Emitting Color
Schematic:
Yellow
Lens Type
Dome Lens Waterclear
General Information:
Operating Temperature
3,4 ±0,15
2
1
1
+
2
Protection device
Polarity Mark
(Cathode)
-40 up to +125 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +125 °C
Moisture Sensitivity Level (MSL)
2
Scale - 8:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
003.000
2020-07-24
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMDC SMT Mono-color
Ceramic LED Waterclear
ORDER CODE
150353YS74500
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
1/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Properties
Test conditions
Peak Wavelength
λPeak
350 mA
Dominant Wavelength
Viewing Angle:
Value
min.
typ.
max.
Unit
593
nm
590
nm
λDom
350 mA
Luminous Flux
ΦV
350 mA
Forward Voltage
VF
350 mA
Δλ
350 mA
15
nm
2θ50% 350 mA
125
°
Spectral Bandwidth
Viewing Angle Phi 0°
70
90
2.2
lm
3
V
0°
- 62,5°
10°
100
Certification:
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [IEC 61249-2-21]
Halogen Free
Conform [JEDEC JS709B]
Relative Luminous Intensity (%)
RoHS Approval
20°
30°
90
40°
80
45°
70
50°
60
50
60°
62,5°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
003.000
2020-07-24
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMDC SMT Mono-color
Ceramic LED Waterclear
ORDER CODE
150353YS74500
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
2/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Forward Current vs. Forward Voltage:
800,0
700,0
100
600,0
Forward Current [mA]
Relative Intensity [%]
80
60
40
20
0
400
450
500
550
600
650
700
750
500,0
400,0
300,0
200,0
Wavelength [nm]
100,0
0,0
1,0
1,5
2,0
2,5
3,0
Forward Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
003.000
2020-07-24
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMDC SMT Mono-color
Ceramic LED Waterclear
ORDER CODE
150353YS74500
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
3/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Luminous Intensity vs. Forward Current:
Junction Temperature vs. Dominant Wavelength:
12.0
180,0
10.0
140,0
8.0
120,0
6.0
Relative Wavelength Change Δλd [nm]
Luminous Flux [lm]
160,0
100,0
80,0
60,0
40,0
20,0
4.0
2.0
0.0
-2.0
-4.0
0,0
0
100
200
300
400
500
600
700
800
-10
0
10
20
30 40 50 60 70 80
Junction Temperature [C]
90
100 110 120
Forward Current [mA]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
003.000
2020-07-24
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMDC SMT Mono-color
Ceramic LED Waterclear
ORDER CODE
150353YS74500
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
4/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Junction Temperature vs. Luminous Intensity:
Junction Temperature vs. Forward Voltage:
180
0.15
160
0.1
140
120
Relative Forward Voltaged [V]
Relative Luminous intensity [%]
0.05
100
80
60
40
0
-0.05
-0.1
-0.15
-0.2
20
0
-0.25
-10
0
10
20
30 40 50 60 70 80
Junction Temperature [C]
90
100 110 120
-10
0
10
20
30 40 50 60 70 80
Junction Temperature [C]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
003.000
2020-07-24
DIN ISO 2768-1m
90 100 110 120
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMDC SMT Mono-color
Ceramic LED Waterclear
ORDER CODE
150353YS74500
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
5/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Derating Curve:
1
0.9
Forward Current [A]
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
25
50
75
100
Ambient Temperature [˚C]
Rj-a = 40 ˚K/W
Rj-a = 30 ˚K/W
Rj-a = 20 ˚K/W
Rj-a = 10 ˚K/W
125
150
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
003.000
2020-07-24
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMDC SMT Mono-color
Ceramic LED Waterclear
ORDER CODE
150353YS74500
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
6/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel: [mm]
P0
A
K0
P2
W3
T
E1
D0
W1
close to center
B0
W
E2
A
N
F
D
B
C
Top Cover
Tape
D1
A
P1
A0
T2
Cathode Mark
End
W2
T1
Start
Feeding direction
Carrier Tape
Cover Tape
detail B
B
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
No Component
min.100mm
Embossment
Cover Tape
min. 400mm
packaging is reffered to the international standard IEC 60286-3:2013
tolerance
size
150353xS75400
A0 B0 W
typ. typ. +0,3/ -0,1
3,8 3,8 12,0
T
T1 T2 K0 P0 P1 P2
D0
ref. max. typ. typ. ±0,1 ±0,1 ±0,05 +0,1/ -0,0
0,25 0,1 2,55 2,2 4,0 8,0 2,0
1,5
D1 E1 E2
F
Tape Type 2a
min. ±0,1 min. ±0,05
1,5 1,75 10,25 5,5
Polystyrene
VPE / packaging unit
pcs.
1000
165° - 180°
12 mm
A
± 2,0
178,00
B
min.
1,50
C
min.
12,80
D
min.
20,20
N
min.
50,00
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
003.000
2020-07-24
DIN ISO 2768-1m
W1
+ 2,0
12,40
W2
max.
18,40
W3
min.
11,90
W3
max.
15,40
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
Tolerance
Tape width
12 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SMDC SMT Mono-color
Ceramic LED Waterclear
ORDER CODE
150353YS74500
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
7/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
Ts min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
Liquidous Temperature
tL
Preheat Area
TC –5°C
Value
Preheat Temperature Min
max. 60 - 120 seconds
3 °C/ second max.
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
≥ 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³