1540601NBA500

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties Collector Mark 1,5 1 1 0,3 ±0,1 2 0,3 ±0,1 0,8 0,8 2 Value Unit Power Dissipation PDiss 150 mW Collector Emitter Voltage VCE 35 V Emitter Collector Voltage VEC 5 V Continuous Collector Current IC 20 mA ESD Threshold/ Human Body Model VESD HBM 2000 V Optical Properties: 0,8 Chip Technology Si Polarity 0,8 ±0,1 Waterclear Scale - 20:1 General Information: Schematic: 0,5 ±0,1 1,6 ±0,1 NPN phototransistor Lens Type Operating Temperature 1 Collector -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 up to +100 °C Moisture Sensitivity Level (MSL) 2 2 Emitter Scale - 20:1  IR LEDs emit high intensity IR light. not look directly into the LED during operation. This can be harmful to your eyes.  Wear protective eyewear.  Please follow safety precautions given in  IEC 60825-1 and IEC 62471.  Keep out of reach of children. Avoid direct eye and skin exposure to LED! CAUTION – IR 1 3  Do CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 002.000 2021-09-09 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-STCW SMT Phototransistor Chip Waterclear ORDER CODE 1540601NBA500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Wavelength of Peak Sensitivity Range of Spectral Bandwidth Collector Current Collector-Emitter Dark Current Viewing Angle: Test conditions Value min. λPeak max. 940 λ ICE.P typ. 400 VCE = 5 V Ee = 1 mW/cm² λ = 940 nm 0.9 nm 1100 1.6 V ICEO.Dark VEeCE==020 mW/cm² Unit nm mA 100 nA 0° -75 Viewing Angle Phi 0° 2θ50% 150 10° 100 ° 20° 30° Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Relative Sensitivity Intensity (%) 90 40° 80 45° 70 50° 60 50 60° 40 70° 75° 30 20 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 002.000 2021-09-09 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-STCW SMT Phototransistor Chip Waterclear ORDER CODE 1540601NBA500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral Sensitivity: Collector Current vs. Irradiance: 3.5 100 3 90 2.5 70 60 Collector Current (mA) Relative Spectral Sensitivity (%) 80 50 40 30 2 1.5 1 20 10 0.5 0 400 500 600 700 800 900 1000 1100 0 Wavelength (nm) 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 Irradiance (mW/cm²) Testcondition: Ee = 0.5 mW/ cm²; VCE = 5 V Testcondition: VCE = 5 V CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 002.000 2021-09-09 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-STCW SMT Phototransistor Chip Waterclear ORDER CODE 1540601NBA500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Collector Current vs. Collector-Emitter Voltage: Derating Curve: 3.5 160 140 3.0 120 Power Dissipation (mW) Collector Current (mA) 2.5 2.0 1.5 100 80 60 40 1.0 20 0.5 0 0 0.0 0 5 10 15 20 25 20 30 40 60 80 100 Ambient Temperature (°C) Collector-Emitter Voltage (V) Testcondition: Ee = 1 mW/ cm² CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 002.000 2021-09-09 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-STCW SMT Phototransistor Chip Waterclear ORDER CODE 1540601NBA500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 A K0 P2 B (mm) min. 1.5 C (mm) min. 12.8 D (mm) min. 20.2 N (mm) min. 50 W1 (mm) +1,5 8.4 W2 (mm) max. 14.4 W3 (mm) min. 7.9 W3 (mm) max. 10.9 Material Polystyrene/ Polyurethane T B0 E2 W F E1 D0 A (mm) ± 2,0 178 Top Cover Tape D1 A P1 T1 A0 T2 Collector Mark End Feeding direction Start Carrier Tape Cover Tape No Component min.160mm Components No Component min.100mm Cover Tape min. 400mm Packaging is reffered to the international standard IEC 60286-3:2013 Tape Type 2a A0 typ. 0,94 B0 typ. 1,80 W +0,3/ -0,1 8,00 T ref. 0,2 T1 max. 0,10 T2 typ. 1,1 K0 typ. 1,00 P0 ±0,1 4,00 P1 ±0,1 4,00 P2 ±0,05 2,00 D0 +0,1/ -0,0 1,50 D1 min. 0,30 E1 ±0,1 1,75 E2 min. 6,25 F ±0,05 3,50 Material Polystyrene Packaging Unit pcs. 4000 165° - 180° CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 002.000 2021-09-09 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-STCW SMT Phototransistor Chip Waterclear ORDER CODE 1540601NBA500 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0603 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³