15412085A3060P

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 0,6 ±0,1 1,6 normal use 1 1 2 IF Peak 2,0 1,5 Reverse Voltage 0,8 2,6 0,8 ESD Threshold/ Human Body Model duty/ 10 @ 10 kHz Unit 140 mW 700 mA IF 100 mA VREV 5 V VESD HBM 2000 V 1,6 Chip Technology AlGaAs Emitting Color 2 Infrared Lens Type 1,85 ±0,1 Value Optical Properties: R 1, 47 1 0,28 typ. Peak Forward Current 1,5 reverse use 3,2 ±0,2 PDiss Continuous Forward Current 2 0,6 ±0,1 Test conditions Power Dissipation Dome Lens Waterclear O2,3 u 0,15 General Information: Schematic: Operating Temperature Polarity Mark (Anode) -40 up to +85 °C Storage Conditions (for single parts) -40 °C up to +85 °C; up to 90 % Storage Conditions (in original packaging) < 40 °C ; < 90 % RH R 5 0,7 Moisture Sensitivity Level (MSL) 1 + 2  IR LEDs emit high intensity IR light.  Do not look directly into the LED during operation. This can be harmful to your eyes.  Wear protective eyewear.  Please follow safety precautions given in  IEC 60825-1 and IEC 62471.  Keep out of reach of children. Avoid direct eye and skin exposure to LED! CAUTION – IR 2 1,6 ±0,2 1 3 Scale - 10:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.003 2021-03-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIRW SMT Infrared Reverse mount Waterclear Dome ORDER CODE 15412085A3060P SIZE/TYPE BUSINESS UNIT STATUS PAGE 1206 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Peak Wavelength Centroid Wavelength Viewing Angle: Test conditions λPeak 20 mA Value min. typ. max. 850 Unit nm λCentroid 20 mA Radiant Intensity Ie 20 mA Forward Voltage VF 20 mA 1.4 Spectral Bandwidth Δλ 20 mA 30 nm Reverse Current IREV 5V 10 µA 20 mA 30 ° Viewing Angle Phi 0° 2θ50% 15 845 nm 20 mW/sr 2 V -15° 0° 10° 100 Certification: 15° 20° 30° RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [IEC 61249-2-21] Halogen Free Conform [JEDEC JS709B] Relative Luminous Intensity (%) 90 40° 80 45° 70 50° 60 50 60° 40 70° 30 20 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.003 2021-03-15 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIRW SMT Infrared Reverse mount Waterclear Dome ORDER CODE 15412085A3060P SIZE/TYPE BUSINESS UNIT STATUS PAGE 1206 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 250 200 Forward Current [mA] 100 Relative Intensity [%] 80 60 40 150 100 20 0 400 500 600 700 800 900 1000 1100 50 Wavelength [nm] 0 0.0 0.5 1.0 1.5 2.0 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.003 2021-03-15 DIN ISO 2768-1m 2.5 3.0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIRW SMT Infrared Reverse mount Waterclear Dome ORDER CODE 15412085A3060P SIZE/TYPE BUSINESS UNIT STATUS PAGE 1206 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Relative Radiant Intensity vs. Forward Current: Derating Curve: 14.00 120 12.00 100 Forward Currennt (mA) Relative Radiant Intensity 10.00 8.00 6.00 80 60 40 4.00 20 2.00 0 0.00 0 50 100 150 Forward Current [mA] 200 250 0 10 20 30 40 50 60 70 Ambient Temperature (℃) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.003 2021-03-15 DIN ISO 2768-1m 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIRW SMT Infrared Reverse mount Waterclear Dome ORDER CODE 15412085A3060P SIZE/TYPE BUSINESS UNIT STATUS PAGE 1206 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 A K0 P2 B (mm) min. 1.5 C (mm) min. 12.8 D (mm) min. 20.2 N (mm) min. 50 W1 (mm) +1,5 8.4 W2 (mm) max. 14.4 W3 (mm) min. 7.9 W3 (mm) max. 10.9 Material Polystyrene/ Polyurethane T E2 B0 P1 D1 A W F E1 D0 A (mm) ± 2,0 178 T1 A0 T2 End Start Polarity Mark Feeding direction Carrier Tape Cover Tape No Component min. 160mm Components No Component min. 100mm Cover Tape min. 400mm Packaging is reffered to the international standard IEC 60286-3:2013 Tape Type 2a A0 (mm) typ. 1,78 B0 (mm) typ. 3,37 W (mm) +0,3/ -0,1 8,00 T (mm) ref. T1 (mm) max. 0,10 T2 (mm) typ. 2,25 K0 (mm) typ. 2,17 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 4,00 P2 (mm) ±0,05 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 0,30 E1 (mm) ±0,1 1,75 E2 (mm) min. 6,25 F (mm) ±0,05 3,50 Material Qty. (pcs.) Polystyrene 2000 165° - 180° CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.003 2021-03-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIRW SMT Infrared Reverse mount Waterclear Dome ORDER CODE 15412085A3060P SIZE/TYPE BUSINESS UNIT STATUS PAGE 1206 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min max. 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³