Dimensions: [mm]
Dimensions: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Polarity Mark
PDiss
Peak Forward Current
IF Peak
Continuous Forward Current
1,3 typ.
Reverse Voltage
2
1
1,5
2
1
Test conditions
Power Dissipation
0,5 typ.
1,8 typ.
0,8
1,6
ESD Threshold/ Human Body
Model
duty/ 10 @ 10 kHz
Value
Unit
140
mW
700
mA
IF
70
mA
VREV
5
V
VESD HBM
2000
V
Optical Properties:
0,8
Chip Technology
AlGaAs
Emitting Color
Infrared
Lens Type
2,0 ±0,1
Dome Waterclear
Scale - 10:1
3,0 ±0,1
0,63 typ.
0,58 typ.
General Information:
Schematic:
Operating Temperature
-40 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +85 °C
Moisture Sensitivity Level (MSL)
1
2
Scale - 10:1
3
IR
LEDs emit high intensity IR light.
Do not look directly into the LED during operation.
This can be harmful to your eyes.
Wear protective eyewear.
Please follow safety precautions given in
IEC 60825-1 and IEC 62471.
Keep out of reach of children.
Avoid direct eye and skin exposure to LED!
CAUTION – IR
2
-
1,5 ±0,1
1
+
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-03-15
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SICW SMT Infrared Chip LED
Waterclear
ORDER CODE
15412085A9000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1206
eiPal
Valid
1/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Properties
Peak Wavelength
Centroid Wavelength
Viewing Angle:
Test conditions
λPeak
20 mA
Value
min.
typ.
850
λCentroid
20 mA
Radiant Intensity
Ie
20 mA
Forward Voltage
VF
20 mA
1.4
Spectral Bandwidth
Δλ
20 mA
30
Reverse Current
IREV
5V
Viewing Angle Phi 0°
2θ50%
20 mA
max.
3
Unit
nm
845
nm
5
mW/sr
2
nm
10
90
V
µA
°
0°
-45
10°
100
Certification:
20°
30°
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
Relative Radiant Intensity (%)
90
40°
80
45°
45°
70
50°
60
50
60°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-03-15
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SICW SMT Infrared Chip LED
Waterclear
ORDER CODE
15412085A9000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1206
eiPal
Valid
2/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Relative Radiant Intensity vs. Forward Current:
12.0
100
10.0
Relative Radiant Intensity
Relative Intensity [%]
80
60
40
8.0
6.0
4.0
20
2.0
0
400
500
600
700
800
Wavelength [nm]
900
1000
1100
0.0
0
50
100
150
200
250
Forward Current [mA]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-03-15
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SICW SMT Infrared Chip LED
Waterclear
ORDER CODE
15412085A9000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1206
eiPal
Valid
3/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Forward Current vs. Forward Voltage:
Derating Curve:
90
250.0
80
70
Forward Currennt (mA)
Forward Current [mA]
200.0
150.0
100.0
60
50
40
30
20
50.0
10
0
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0
10
20
30
40
50
60
70
Ambient Temperature (℃)
80
90
100
Forward Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-03-15
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SICW SMT Infrared Chip LED
Waterclear
ORDER CODE
15412085A9000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1206
eiPal
Valid
4/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
P0
A
K0
P2
T
B
(mm)
min.
1.5
C
(mm)
min.
12.8
D
(mm)
min.
20.2
N
(mm)
min.
50
W1
(mm)
+1,5
8.4
W2
(mm)
max.
14.4
W3
(mm)
min.
7.9
W3
(mm)
max.
10.9
Material
Polystyrene/ Polyurethane
B0
E2
W
F
E1
D0
A
(mm)
± 2,0
178
Top Cover
Tape
D1
A
P1
T1
A0
T2
End
Feeding direction
Start
Carrier Tape
Cover Tape
Polarity Mark
No Component
min.160mm
Components
No Component
min.100mm
Cover Tape
min. 400mm
Packaging is reffered to the international standard IEC 60286-3:2013
tolerance
value
A0
typ.
1.9
B0
typ.
3.4
W
+0,3/ -0,1
8
T
ref.
0.25
T1
max.
0.1
T2
typ.
1.8
K0
typ.
1.5
P0
±0,1
4
P1
±0,1
4
P2
±0,05
2
D0
+0,1/ -0,0
1.5
D1
min.
0.9
E1
±0,1
1.75
E2
min.
6.25
F
±0,05
3.5
Tape type 2a
Polystyrene
Packaging Unit
pcs.
3000
165° - 180°
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-03-15
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SICW SMT Infrared Chip LED
Waterclear
ORDER CODE
15412085A9000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1206
eiPal
Valid
5/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
Ts min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
Liquidous Temperature
tL
Preheat Area
TC –5°C
Value
Preheat Temperature Min
max. 60 - 120 seconds
3 °C/ second max.
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³