15414194AA211

Dimensions: [mm] Recommended Hole Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 1,5 ±0,2 3 0,8 ±0,2 3,5 ±0,2 0,7 ±0,2 1 1 3 2 0,8 4 4 2,6 2 Value Unit Power Dissipation PDiss 180 mW Peak Forward Current IF Peak 120 mA Continuous Forward Current IF 100 mA ESD Threshold/ Human Body Model VESD HBM 8000 V TJ 120 °C Junction Temperature Optical Properties: 1,6 Chip Technology 4,6 AlGaAs Emitting Color 3,2 ±0,2 Infrared 1,85 ±0,2 Lens Type Waterclear General Information: Schematic: Operating Temperature -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Moisture Sensitivity Level (MSL) O 2,4 ±0,2 1 2 + 4 1 + 3 + 2  IR LEDs emit high intensity IR light. not look directly into the LED during operation. This can be harmful to your eyes.  Wear protective eyewear.  Please follow safety precautions given in  IEC 60825-1 and IEC 62471.  Keep out of reach of children. Avoid direct eye and skin exposure to LED! CAUTION – IR 3 Polarity Mark 2,8 ±0,2 4 3  Do CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2021-10-26 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SITW SMT Infrared TOP LED Waterclear ORDER CODE 15414194AA211 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Viewing Angle: Test conditions Value min. typ. max. Unit λPeak 100 mA λCentroid 100 mA Radiant Intensity Ie 100 mA Forward Voltage VF 100 mA Spectral Bandwidth Δλ 100 mA 50 nm Viewing Angle Phi 0° 2θ50% 100 mA 120 ° Peak Wavelength Centroid Wavelength 940 10 nm 940 nm 30 mW/sr 1.4 2 V 0° - 60° Certification: 10° 100 Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] 80 Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Relative Luminous Intensity (%) RoHS Approval 90 20° 30° 40° 45° 70 50° 60 50 60° 40 70° 30 20 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2021-10-26 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SITW SMT Infrared TOP LED Waterclear ORDER CODE 15414194AA211 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 100 140,0 120,0 Forward Current [mA] Relative Intensity [%] 80 60 40 20 100,0 80,0 60,0 40,0 20,0 0 400 500 600 700 800 Wavelength [nm] 900 1000 1100 0,0 0,0 0,5 1,0 1,5 2,0 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2021-10-26 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SITW SMT Infrared TOP LED Waterclear ORDER CODE 15414194AA211 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Radiant Intensity vs. Forward Current: Derating Curve: 120 50,0 45,0 100 40,0 Forward Currennt (mA) Radiant Intensity [mW/sr] 35,0 30,0 25,0 20,0 80 60 40 15,0 10,0 20 5,0 0 0,0 0 20 40 60 80 100 120 140 0 10 20 Forward Current [mA] 30 40 50 60 70 Ambient Temperature (℃) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2021-10-26 DIN ISO 2768-1m 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SITW SMT Infrared TOP LED Waterclear ORDER CODE 15414194AA211 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A P2 T W3 E1 D0 K0 W B E2 B0 D F W1 close to center C Top Cover Tape D1 A P1 End W2 T1 A0 T2 Feeding direction Carrier Tape Start detail B Cover Tape B Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min.100mm Embossment Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type Tolerance Value 2a A0 (mm) typ. 3,10 B0 (mm) typ. W (mm) +0,3/ -0,1 8,00 T (mm) ref. T1 (mm) ref. 0,10 T2 (mm) typ. 2,35 K0 (mm) typ. 2,15 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 4,00 P2 (mm) ±0,05 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) typ. 1,00 E1 (mm) ±0,1 1,75 E2 (mm) min. 6,25 F (mm) ±0,05 3,50 Material Qty. (pcs.) Polystyrene 2000 165° - 180° Tolerance Value A (mm) ± 2,0 330 B (mm) min. 1.5 C (mm) min. 12.8 D (mm) min. 20.2 N (mm) typ. 60 W1 (mm) + 1,5 8.4 W2 (mm) max. 14.4 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2021-10-26 DIN ISO 2768-1m W3 (mm) min. 7.9 W3 (mm) max. 10.9 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SITW SMT Infrared TOP LED Waterclear ORDER CODE 15414194AA211 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3528 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³