15427294BA242

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 1,5 ±0,15 0,5 ±0,15 Anode 1,55 1 Unit 3200 mW 2000 mA IF 1000 mA VREV 5 V ESD Threshold/ Human Body Model VESD HBM 2000 V Absolute Thermal Resistance Junction to Solder Point RθJS 10 K/W TJ 125 °C Peak Forward Current IF Peak Reverse Voltage 2 1,65 1,25 1,6 ±0,15 1,2 ±0,15 2 Value PDiss Continuous Forward Current 0,55 1 Test conditions Power Dissipation 0,3 ±0,15 Junction Temperature 0,3 0,6 ±0,15 2,75 ±0,15 duty/ 10 @ 1 kHz General Information: Scale - 10:1 Schematic: Operating Temperature -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 up to +85 °C Moisture Sensitivity Level (MSL) + 2  IR LEDs emit high intensity IR light. not look directly into the LED during operation. This can be harmful to your eyes.  Wear protective eyewear.  Please follow safety precautions given in  IEC 60825-1 and IEC 62471.  Keep out of reach of children. Avoid direct eye and skin exposure to LED! CAUTION – IR 2 2,0 ±0,15 1 1 3 Scale - 10:1  Do CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2020-09-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIQW SMT Infrared QFN LED Waterclear ORDER CODE 15427294BA242 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2720 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Viewing Angle: Test conditions Value min. typ. max. Unit λPeak 1000 mA λCentroid 1000 mA Φe 1000 mA Radiant Intensity Ie 1000 mA Forward Voltage VF 1000 mA 3 Spectral Bandwidth Δλ 1000 mA 50 nm Viewing Angle Phi 0° 2θ50% 1000 mA 120 ° Peak Wavelength Centroid Wavelength Radiant Flux 940 800 nm 935 nm 1000 mW 360 mW/sr 3.4 V 0° -60 10° 100 Certification: Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Optical Properties: Emitting Color Lens Type Plastic Housing Color AlInGaAs Relative Luminous Intensity (%) RoHS Approval Chip Technology 20° 30° 90 40° 80 45° 70 50° 60 60° 60° 50 40 70° 30 Infrared 20 Waterclear 10 80° QFN -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2020-09-24 DIN ISO 2768-1m 50 60 70 80 90 90° 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIQW SMT Infrared QFN LED Waterclear ORDER CODE 15427294BA242 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2720 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 2000,0 1800,0 1600,0 100 1400,0 Forward Current [mA] Relative Intensity [%] 80 60 40 20 1200,0 1000,0 800,0 600,0 0 400 500 600 700 Wavelength [nm] 800 900 1000 1100 400,0 200,0 0,0 0,0 1,0 2,0 3,0 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2020-09-24 DIN ISO 2768-1m 4,0 5,0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIQW SMT Infrared QFN LED Waterclear ORDER CODE 15427294BA242 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2720 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Radiant Flux vs. Forward Current: Derating Curve: 1,4 1400,0 1,2 Forward Current [A] 1200,0 Radiant Flux [mW] 1000,0 1 0,8 800,0 0,6 600,0 0,4 400,0 0,2 200,0 0 0 25 50 Ambient Temperature [˚C] 75 100 0,0 0 500 1000 Forward Current [mA] 1500 2000 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2020-09-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIQW SMT Infrared QFN LED Waterclear ORDER CODE 15427294BA242 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2720 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 W3 T E1 D0 W1 close to center B0 A N W E2 F D B C Top Cover Tape D1 A P1 W2 T1 A0 T2 End Feeding direction Start Cathode Mark Carrier Tape Cover Tape detail B B Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type Tolerance Value 2a A0 (mm) typ. 2,25 B0 (mm) typ. 3,00 W (mm) +0,3/ -0,1 12,00 T (mm) ref. 0,28 T1 (mm) ref. 0,10 T2 (mm) typ. 1,10 K0 (mm) typ. 0,90 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 8,00 P2 (mm) ±0,05 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 10,25 F (mm) ±0,05 5,50 Material Qty. (pcs.) B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 12,40 W2 (mm) max. 18,40 W3 (mm) min. 11,90 W3 (mm) max. 15,40 Material Polystyrene Polystyrene 165° - 180° CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 001.000 2020-09-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Pull-of force Tape width Tolerance Value A (mm) ± 2,0 178,00 12 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIQW SMT Infrared QFN LED Waterclear ORDER CODE 15427294BA242 SIZE/TYPE BUSINESS UNIT STATUS PAGE 2720 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³