15435394AA350

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 3,25 ±0,15 4,0 3,25 0,48 1,30 0,50 1 0,48 ±0,15 2 3,25 2 1 3,25 ±0,15 1,3 ±0,15 Test conditions Power Dissipation PDiss Peak Forward Current IF Peak Value duty/ 10 @ 1 kHz Unit 2.5 W 1500 mA Continuous Forward Current IF 1000 mA ESD Threshold/ Human Body Model VESD HBM 8000 V Absolute Thermal Resistance Junction to Solder Point RθJS 10 K/W TJ 115 °C Junction Temperature Thermal pad Scale - 8:1 2,1 ±0,15 0,77 ±0,15 Optical Properties: O 2,6 ±0,15 3,4 ±0,15 Chip Technology AlGaAs Emitting Color Infrared Lens Type Silicone Dome Lens Waterclear Schematic: General Information: Storage Conditions (in original packaging) + 2 Protection device Polarity Mark (Cathode) Scale - 8:1 Moisture Sensitivity Level (MSL) 2  IR LEDs emit high intensity IR light. not look directly into the LED during operation. This can be harmful to your eyes.  Wear protective eyewear.  Please follow safety precautions given in  IEC 60825-1 and IEC 62471.  Keep out of reach of children. Avoid direct eye and skin exposure to LED! CAUTION – IR 3,4 ±0,15 2 1 1 < 40 °C ; < 90 % RH  Do CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIMW SMT Infrared Ceramic Waterclear ORDER CODE 15435394AA350 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 1/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Test conditions Value min. typ. max. Unit λPeak 1000 mA λCentroid 1000 mA Φe 1000 mA Radiant Intensity Ie 1000 mA Forward Voltage VF 1000 mA Spectral Bandwidth Δλ 1000 mA 45 nm IREV 5V 10 µA 1000 mA 130 ° Peak Wavelength Centroid Wavelength Radiant Flux Reverse Current Viewing Angle Phi 0° 2θ50% 945 940 500 nm 800 220 1.5 1.9 mW mW/sr 2.5 V -65° 0° 10° 100 20° 30° 90 Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Photobiological Safety nm IEC-62471 [ Exempt Group 0 ] Relative Luminous Intensity (%) Properties Viewing Angle: 40° 80 45° 70 50° 60 50 60° 65° 40 70° 30 20 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIMW SMT Infrared Ceramic Waterclear ORDER CODE 15435394AA350 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 2/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 1400 1200 100 Forward Current [mA] 1000 Relative Intensity [%] 80 60 40 800 600 20 400 0 400 500 600 700 Wavelength [nm] 800 900 1000 1100 200 0 0.0 0.5 1.0 1.5 2.0 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m 2.5 3.0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIMW SMT Infrared Ceramic Waterclear ORDER CODE 15435394AA350 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 3/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Radiant Flux vs. Forward Current: Radiant Intensity vs. Forward Current: 1.60 300 1.40 250 Radiant Intenisty [mW/sr] Relative Radiant Flux 1.20 1.00 0.80 0.60 200 150 100 0.40 50 0.20 0.00 0 0 200 400 600 800 1000 Forward Current [mA] 1200 1400 0 200 400 600 800 1000 Forward Current [mA] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m 1200 1400 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIMW SMT Infrared Ceramic Waterclear ORDER CODE 15435394AA350 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 4/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Derating Curve: 1.5 1.4 1.3 1.2 3 2 1 Forward Current [A] 1.1 1 4 0.9 5 0.8 6 0.7 0.6 0.5 0.4 0.3 0.2 Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 0.1 xxx xxxx xxx x x xxx Internal Code Product Information Product Code Forward voltage Radiant flux Peak Wavelength 0 0 25 50 75 100 125 Ambient Temperature [˚C] Rj-a 40°C/W Rj-a 30°C/W Rj-a 20°C/W 150 Rj-a 10°C/W CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIMW SMT Infrared Ceramic Waterclear ORDER CODE 15435394AA350 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 5/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Properties Test Conditions Bin Value min. Forward Voltage VF Radiant Flux Φe 1000 mA 1000 mA typ. Unit max. 1 1.5 1.7 V 2 1.7 1.9 V 3 1.9 2.1 V 4 2.1 2.3 V 5 2.3 2.5 V B 500 560 mW C 560 600 mW D 600 680 mW E 680 740 mW F 740 800 mW G 800 860 mW CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIMW SMT Infrared Ceramic Waterclear ORDER CODE 15435394AA350 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 6/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] Packaging Specification - Reel: [mm] P0 P2 W3 T E1 D0 W1 close to center B0 A N W E2 F D B C top cover tape A0 D1 K0 P1 End W2 T1 T2 Polarity Mark Cathode Carrier tape Start Feeding direction detail B Cover tape B Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm packaging is reffered to the international standard IEC 60286-3:2013 tolerance size A0 B0 W typ. typ. +0,3/ -0,1 3535 3.80 3.80 12.00 T T1 T2 K0 P0 P1 P2 D0 typ. typ. typ. typ. ±0,1 +0,1/ -0,0 0.25 0.10 2.45 2.20 4.00 8.00 2.00 1.50 D1 E1 typ. +0,1/ -0,0 1.50 1.75 E2 F Tape Type 2a min. 10.25 5.50 Polystyrene VPE / packaging unit pcs. 500 165° - 180° 12 mm A ±2,0 178,00 B min. 1,50 C ±0,8 13,00 D min. 20,20 N min. 50,00 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-11-04 DIN ISO 2768-1m W1 +1,5 12,40 W2 max. 18,40 W3 min. 11,90 W3 max. 15,40 PROJECTION METHOD DESCRIPTION Pull-of force Tape width tolerance Tape width 12 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SIMW SMT Infrared Ceramic Waterclear ORDER CODE 15435394AA350 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3535 eiPal Valid 7/11 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³