155124M173200

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 2,14 u 0,1 1,3 u 0,1 4 Unit PDiss R 45 mW 0,3 Power Dissipation (Green) PDiss G 56 mW 3 Power Dissipation (Blue) PDiss B 60 mW Peak Forward Current IF Peak 30 mA IF 20 1,42 u 0,1 0,6 3 mA VREV 5 V 0,3 u 0,1 1000 V 0,9 2 2 0,55 1 1,42 u 0,1 Value Power Dissipation (Red) 1,5 Test conditions Continuous Forward Current Reverse Voltage 1 4 ESD Threshold/ Human Body Model duty/ 10 @ 1 kHz VESD HBM 20 mA 2,2 3,2 u 0,1 Optical Properties: 3,4 Chip Technology Scale - 12:1 1,5 u 0,1 0,5 u 0,1 2,2 u 0,1 R Lens Type 1,0 u 0,1 1 Anode Mark Round General Information: 2 G Operating Temperature 3 2 Red & Green & Blue Schematic: B B AlInGaP + InGaN Emitting Color G 3 4 + 1 -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 up to +85 °C Moisture Sensitivity Level (MSL) 3 R 4 Scale - 10:1 BRG: Linear Chip Layout CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.003 2020-09-30 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SFSW SMT Full-color Side view Waterclear ORDER CODE 155124M173200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1204 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Properties Test conditions Viewing Angle: Value min. typ. max. Unit Peak Wavelength (Red) λPeak R 20 mA 632 nm Peak Wavelength (Green) λPeak G 20 mA 515 nm Peak Wavelength (Blue) λPeak B 20 mA 460 nm Dominant Wavelength (Red) λDom R 20 mA 622 nm Dominant Wavelength (Green) λDom G 20 mA 523 nm Dominant Wavelength (Blue) λDom B 20 mA 465 nm Luminous Intensity (Red) IV R 20 mA 350 450 mcd Luminous Intensity (Green) IV G 20 mA 600 850 mcd 2.4 V 80 2.8 3.4 V 20 mA 3 3.4 V Δλ R 20 mA 20 nm Spectral Bandwidth (Green) Δλ G 20 mA 30 nm Spectral Bandwidth (Blue) Δλ B 20 mA 20 nm Reverse Current IREV 5V IV B 20 mA 100 140 Forward Voltage (Red) VF R 20 mA 2 Forward Voltage (Green) VF G 20 mA Forward Voltage (Blue) VF B Spectral Bandwidth (Red) 1 µA Relative Luminous Intensity (%) mcd 90 Luminous Intensity (Blue) 0° - 60° 10° 100 20° 30° 40° 45° 70 50° 60 50 60° 40 70° 30 Viewing Angle Phi 0° 2θ50% 20 mA 120 ° 20 Viewing Angle Phi 90° 2θ50% 20 mA 100 ° 10 80° 90° Certification: -90 RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Halogen Free Photobiological Safety -45 0 10 20 30 40 50 60 70 80 90 100 Conform [IEC 61249-2-21] Conform [JEDEC JS709B] IEC-62471 [ Exempt Group 0 ] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.003 2020-09-30 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SFSW SMT Full-color Side view Waterclear ORDER CODE 155124M173200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1204 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Viewing Angle: Spectral: 100 - 50° 0° 10° 100 20° 80 30° 40° 80 Relative Intensity [%] Relative Luminous Intensity (%) 90 45° 70 50° 60 50 60° 40 60 40 70° 30 20 20 80° 10 90° -90 -45 0 10 20 30 40 50 60 70 80 90 100 0 400 450 500 550 600 650 700 750 Wavelength [nm] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.003 2020-09-30 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SFSW SMT Full-color Side view Waterclear ORDER CODE 155124M173200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1204 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Luminous Intensity vs. Forward Current: Forward Current vs. Forward Voltage: 1400 35 1300 1200 30 1100 25 900 Forward Current [mA] Luminous Intensity [mcd] 1000 800 700 600 500 400 20 15 10 300 200 5 100 0 0 0 5 10 15 20 Forward Current [mA] 25 30 35 0.0 0.5 1.0 1.5 2.0 2.5 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.003 2020-09-30 DIN ISO 2768-1m 3.0 3.5 4.0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SFSW SMT Full-color Side view Waterclear ORDER CODE 155124M173200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1204 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Derating Curve: 40 35 Forward Current [mA] 30 25 20 15 10 5 0 0 20 40 60 80 100 Ambient Temperature [°C] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.003 2020-09-30 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SFSW SMT Full-color Side view Waterclear ORDER CODE 155124M173200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1204 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 D0 W3 T W1 close to center E1 A K0 P2 B0 D1 N C Top Cover Tape Anode Mark A D A E2 W F B P1 T1 A0 W2 T2 Feeding direction End Start Carrier Tape detail B B Cover Tape Top Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min.100mm Embossment Bottom Cover Tape Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 tolerance size A0 typ. 1,7 B0 typ. 3,4 W +0,3/ -0,1 8,0 T T1 T2 K0 ref. max. typ. typ. 0,23 0,1 1,49 1,2 P0 ±0,1 4,0 P1 ±0,1 4,0 P2 ±0,05 2,0 D0 +0,1/ -0,0 1,5 D1 min. 0,3 E1 ±0,1 1,75 E2 F min. ±0,05 6,25 3,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 3000 165° - 180° Tolerance Tape width 8 mm A ± 2,0 178 B min. 1.5 C min. 12.8 D min. 20.2 N min. 50 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.003 2020-09-30 DIN ISO 2768-1m W1 +1,5 8.4 W2 max. 14.4 W3 min. 7.9 W3 max. 10.9 PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SFSW SMT Full-color Side view Waterclear ORDER CODE 155124M173200 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1204 eiPal Valid 6/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min max. 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³