157102S12800

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 1,44 R 0,3 5 1 0,9 Test conditions 1 10 0,9 ±0,25 5 10,0 mA IF 20 mA VREV 5 V VESD HBM 1000 V IF Peak ESD Threshold/ Human Body Model duty/ 10 @ 1 kHz Optical Properties: 6 Chip Technology 1,44 6,9 ±0,25 Scale - 2,5:1 2,2 ±0,25 3,0 ±0,25 0,1 max. 10 A B 10,0 ±0,25 5,08 8,0 ±0,25 F 0,7 Milky Common Anode General Information: 6 6 Operating Temperature -35 up to +85 °C Storage Conditions (for single parts) -35 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH G E C D DP 3 0, 5 Grey Segment Color Segments Feature & Pin Position: 10° 10 Super Red Surface Color Circuitry A 3,2 AlGaInP/GaAs Emitting Color 5,76 1 mW 100 Peak Forward Current Reverse Voltage 2,8 1,2 ±0,25 detail A Unit 48 PDiss Continuous Forward Current 6 10 Value Power Dissipation 1 Moisture Sensitivity Level (MSL) 3 5 O0,8 Scale - 2,5:1 Scale - 3:1 Product Marking: Marking Matchcode S7DS Marking Size 020 Marking Color-Code S Marking Circuitry A Marking - Lot Number Lot number CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.001 2022-06-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-S7DS 7 Segments Display SMT Single Digit ORDER CODE 157102S12800 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0.2" eiPal Valid 1/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Schematic: Pin Connection: 3,8 A 7 B 6 C 4 D 2 E 1 F 9 Pin No Connection 1 Cathode E 2 Cathode D 3 Common anode 4 Cathode C 5 Cathode DP 6 Cathode B 7 Cathode A 8 Common anode 9 Cathode F 10 Cathode G G DP 10 5 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.001 2022-06-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-S7DS 7 Segments Display SMT Single Digit ORDER CODE 157102S12800 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0.2" eiPal Valid 2/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Dominant Wavelength Test conditions Value min. typ. λDom 20 mA max. Unit 635 nm 10 mA 10 mcd 20 mA 16 VF 20 mA 2 Spectral Bandwidth Δλ 20 mA 20 Reverse Current IREV 5V Luminous Intensity IV Luminous Intensity IV Forward Voltage Luminous Intensity Matching Ratio mcd 2.4 nm 5 10 mA V 100 µA 2:1 80 Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [IEC 61249-2-21] Halogen Free Conform [JEDEC JS709B] ESD Approval Yes Relative Intensity [%] Properties Spectral: 60 40 20 0 400 450 500 550 600 650 700 750 Wavelength [nm] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.001 2022-06-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-S7DS 7 Segments Display SMT Single Digit ORDER CODE 157102S12800 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0.2" eiPal Valid 3/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Forward Current vs. Forward Voltage: Luminous Intensity vs. Forward Current: 40,0 50,0 45,0 35,0 40,0 30,0 Luminous Intensity [mcd] Forward Current [mA] 35,0 25,0 20,0 15,0 30,0 25,0 20,0 15,0 10,0 10,0 5,0 5,0 0,0 0,0 1,5 2,0 2,5 3,0 3,5 0 5 10 15 Forward Voltage [V] 20 25 30 35 40 Forward Current [mA] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.001 2022-06-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-S7DS 7 Segments Display SMT Single Digit ORDER CODE 157102S12800 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0.2" eiPal Valid 4/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Derating Curve: 30 28 26 24 Forward Current [mA] 22 20 18 16 14 12 10 8 6 4 2 0 0 10 20 30 40 50 60 70 80 90 Ambient Temperature [°C] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.001 2022-06-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-S7DS 7 Segments Display SMT Single Digit ORDER CODE 157102S12800 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0.2" eiPal Valid 5/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] P0 P2 W3 T E1 A K0 D0 W A C Top Cover Tape A0 A P1 N F B E2 B0 D W1 close to center W2 T1 T2 Feeding direction End Start detail B Carrier Tape Cover Tape B Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components Embossment No Component min. 100mm Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type Tolerance Value 2a A0 (mm) typ. 7,60 B0 (mm) typ. 10,70 W (mm) +0,3/ -0,1 24,00 T (mm) ref. 0,35 T1 (mm) ref. 0,10 T2 (mm) typ. 3,50 K0 (mm) typ. 3,25 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 12,00 P2 (mm) ±0,1 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 22,25 F (mm) ±0,1 11,50 Material Qty. (pcs.) Polystyrene 1500 165° - 180° B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 001.001 2022-06-24 DIN ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width Tolerance Value A (mm) ± 2,0 330,00 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-S7DS 7 Segments Display SMT Single Digit ORDER CODE 157102S12800 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0.2" eiPal Valid 6/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³