Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
2
1,2
1
Unit
105
mW
40
mA
IF
30
mA
VREV
5
V
ESD Threshold/ Human Body
Model
VESD HBM
2000
V
Absolute Thermal Resistance
Junction to Solder Point
RθJS
50
K/W
TJ
125
°C
Peak Forward Current
IF Peak
Continuous Forward Current
1
0,8
2
0,13
0,8 ±0,1
3,0 ±0,1
2,0
Value
PDiss
Reverse Voltage
0,8 ±0,1
0,83 ±0,1
1,63 ±0,1
0,55
Test conditions
Power Dissipation
Junction Temperature
duty/ 10 @ 1 kHz
Optical Properties:
Scale - 12:1
Chip Technology
InGaN
Emitting Color
Schematic:
Warm White
Lens Type
Top LED
General Information:
1,4 ±0,1
Operating Temperature
1
1
2
+
2
-40 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +85 °C
Moisture Sensitivity Level (MSL)
Polarity Mark
Anode
3
Scale - 12:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
DoK
008.000
2022-05-27
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158301230
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
1/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Test conditions
Value
min.
typ.
Chromaticity Coordinate X
cx
20 mA
Chromaticity Coordinate Y
cy
20 mA
Luminous Flux
ΦV
20 mA
Forward Voltage
VF
20 mA
3
Correlated Color Temperature
CCT
20 mA
3000
Reverse Current
IREV
5V
CRI
20 mA
Color Rendering Index
Viewing Angle Phi 0°
2θ50% 20 mA
max.
Unit
0.4293
0.396
6.5
80
8
lm
3.5
V
5
µA
K
120
0°
- 60°
85
10°
100
20°
°
30°
90
Certification:
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
Relative Luminous Intensity (%)
Properties
Viewing Angle:
40°
80
45°
70
50°
60
50
60°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
DoK
008.000
2022-05-27
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158301230
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
2/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Forward Current vs. Forward Voltage:
40
35
100
30
Forward Current [mA]
Relative Intensity [%]
80
60
40
25
20
15
20
10
0
400,00
450,00
500,00
550,00
600,00
650,00
700,00
750,00
Wavelength [nm]
5
0
0.0
0.5
1.0
1.5
2.0
2.5
Forward Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
DoK
008.000
2022-05-27
DIN ISO 2768-1m
3.0
3.5
4.0
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158301230
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
3/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Luminous Intensity vs. Forward Current:
Derating Curve:
50
15
14
45
13
40
12
11
35
Forward Current (mA)
Luminous Flux [lm]
10
9
8
7
6
5
30
25
20
15
4
10
3
2
5
1
0
0
0
5
10
15
20
25
Forward Current [mA]
30
35
40
0
10
20
30
40
50
60
70
Ambient Temperature (℃)
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
DoK
008.000
2022-05-27
DIN ISO 2768-1m
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158301230
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
4/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Chromaticity diagram:
Chromaticity Properties:
Bin groups from 2850K to 3000K Cx
0,45
0,44
301
0,43
Bin groups from 3000K to 3250K Cx
Cy
0,4028
0,4221
0,3984
0,443
0,4212
0,4299
0,4165
0,4562
0,426
0,443
0,4212
0,4465
0,4071
0,4342
0,4028
0,4342
0,4028
0,4221
0,3984
0,4259
0,3853
0,4147
0,3814
0,4342
0,4028
0,4221
0,3984
0,4465
0,4071
0,4342
0,4028
0,4373
0,3893
0,4259
0,3853
0,4259
0,3853
0,4147
0,3814
303
2850K
3000K
3250K
0,42
CIE y - Coordinate
Cy
0,4342
301
302
303
0,41
304
0,40
302
304
0,39
0,38
0,37
0,36
0,35
0,40
0,41
0,42
0,43
0,44 0,45 0,46
CIE x - Coordinate
Warm white
0,47
0,48
0,49
0,50
Black body line
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
DoK
008.000
2022-05-27
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158301230
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
5/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
A
Packaging Specification - Reel: [mm]
P2
P0
K0
T
W3
E1
D0
W1
close to center
E2
B0
A
A0
C
D1
P1
Polarity Mark
Anode
End
A
N
W
F
D
B
T2
Feeding direction
Start
T1
Top Cover
Tape
W2
Carrier Tape
Cover Tape
detail B
B
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Tape Type
2a
A0
(mm)
typ.
1,55
B0
(mm)
typ.
3,20
W
(mm)
±0,1
8,00
Components
No Component
min.100mm
Embossment
Cover Tape
min. 400mm
T
(mm)
ref.
0,25
T1
(mm)
ref.
0,10
T2
(mm)
typ.
1,15
K0
(mm)
typ.
0,95
P0
(mm)
±0,1
4,00
P1
(mm)
±0,1
4,00
P2
(mm)
±0,05
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
0,30
E1
(mm)
±0,1
1,75
E2
(mm)
min.
6,25
F
(mm)
±0,05
3,50
Material
Qty.
(pcs.)
Polystyrene
2000
165° - 180°
A
(mm)
± 2,0
178
B
(mm)
min.
1.5
C
(mm)
min.
12.8
D
(mm)
min.
20.2
N
(mm)
min.
50
W1
(mm)
+1,5
8.4
W2
(mm)
max.
14.4
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
DoK
008.000
2022-05-27
DIN ISO 2768-1m
W3
(mm)
min.
7.9
W3
(mm)
max.
10.9
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158301230
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3014
eiPal
Valid
6/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
max. 60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³
工商网监
湘ICP备2023018690号
