158302227

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties 0,76 4,0 0,76 1,6 0,8 2,0 2 1,4 1 Unit 198 mW 100 mA IF 85 mA VREV 5 V ESD Threshold/ Human Body Model VESD HBM 2000 V Absolute Thermal Resistance Junction to Solder Point RθJS 38 K/W TJ 130 °C Peak Forward Current IF Peak Reverse Voltage 1,37 2 Value PDiss Continuous Forward Current 0,8 1 Test conditions Power Dissipation 5 Thermal pad Junction Temperature duty/ 10 @ 1 kHz Optical Properties: Scale - 10:1 Schematic: 0,25 0,8 3,0 InGaN Emitting Color Sunrise Lens Type Top LED General Information: Operating Temperature Polarity Mark (Cathode) 2 1 2,0 1 Chip Technology + 2 -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 up to +85 °C Moisture Sensitivity Level (MSL) 3 Scale - 10:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-07-01 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SWTP SMT White Top view PLCC ORDER CODE 158302227 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3022 eiPal Valid 1/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Test conditions Value min. typ. Chromaticity Coordinate X cx 60 mA Chromaticity Coordinate Y cy 60 mA Luminous Flux ΦV 60 mA Forward Voltage VF 60 mA 3.2 Correlated Color Temperature CCT 60 mA 2700 Reverse Current IREV 5V CRI 60 mA Color Rendering Index Viewing Angle Phi 0° 2θ50% 60 mA Unit 0.4527 0.4031 18 80 20 lm 3.5 V 5 µA K 120 0° - 60° 85 10° 100 20° ° 30° 90 Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Photobiological Safety max. IEC-62471 [ Exempt Group 0 ] Relative Luminous Intensity (%) Properties Viewing Angle: 40° 80 45° 70 50° 60 50 60° 40 70° 30 20 80° 10 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-07-01 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SWTP SMT White Top view PLCC ORDER CODE 158302227 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3022 eiPal Valid 2/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 100 90 80 100 70 Forward Current [mA] Relative Intensity [%] 80 60 40 60 50 40 20 30 0 400,00 450,00 500,00 550,00 600,00 650,00 700,00 750,00 20 Wavelength [nm] 10 0 0,0 1,0 2,0 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-07-01 DIN ISO 2768-1m 3,0 4,0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SWTP SMT White Top view PLCC ORDER CODE 158302227 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3022 eiPal Valid 3/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Luminous Intensity vs. Forward Current: Derating Curve: 2,0 90 1,8 80 1,6 70 Forward Currennt (mA) Relative Luminous Flux 1,4 1,2 1,0 0,8 60 50 40 30 0,6 20 0,4 10 0,2 0 0,0 0 10 20 30 40 50 60 70 Forward Current [mA] 80 90 100 0 10 20 30 40 50 60 70 Ambient Temperature (℃) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-07-01 DIN ISO 2768-1m 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SWTP SMT White Top view PLCC ORDER CODE 158302227 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3022 eiPal Valid 4/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Chromaticity diagram: Chromaticity Properties: Bin groups from 2550K to 2700K Cx 0,45 0,44 271 2700K 0,43 Bin groups from 2700K to 2850K Cx Cy 0,4099 0,4465 0,4071 0,4687 0,4289 0,4562 0,426 0,4813 0,4319 0,4687 0,4289 0,47 0,4126 0,4582 0,4099 0,4582 0,4099 0,4465 0,4071 0,4483 0,3919 0,4373 0,3893 0,4582 0,4099 0,4465 0,4071 0,47 0,4126 0,4582 0,4099 0,4593 0,3944 0,4483 0,3919 0,4483 0,3919 0,4373 0,3893 273 2850K 271 0,42 CIE y - Coordinate 2550K Cy 0,4582 273 272 0,41 0,40 274 274 272 0,39 0,38 0,37 0,36 0,35 0,40 0,41 0,42 0,43 0,44 0,45 0,46 CIE x - Coordinate Sunrise 0,47 0,48 0,49 0,50 Black body line CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-07-01 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SWTP SMT White Top view PLCC ORDER CODE 158302227 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3022 eiPal Valid 5/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] W3 P0 P2 T W1 close to center W F A N E1 B D D0 A K0 B0 E2 C Top Cover Tape A D1 P1 W2 T1 A0 T2 detail B Feeding direction End Start Carrier tape B Cover Tape Cover tape Chip Cavity Sprocket Hole No Component min.160mm Components Embossment No Component Cover Tape min. 400mm packaging is reffered to the international standard IEC 60286-3:2013 tolerance value A0 B0 W typ. typ. +0,3/ -0,1 2,18 3,18 8,0 T T1 T2 K0 ref. max. typ. typ. 0,15 0,1 1,25 1,0 P0 ±0,1 4,0 P1 ±0,1 4,0 P2 ±0,05 2,0 D0 +0,1/ -0,0 1,5 D1 min. 0,3 E1 ±0,1 1,75 E2 F min. ±0,05 6,25 3,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 2000 165° - 180° Tolerance Tape width 8 mm A ± 2,0 178 B min. 1.5 C min. 12.8 D min. 20.2 N min. 50 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ZAn 003.000 2021-07-01 DIN ISO 2768-1m W1 +1,5 8.4 W2 max. 14.4 W3 min. 7.9 W3 max. 10.9 PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SWTP SMT White Top view PLCC ORDER CODE 158302227 SIZE/TYPE BUSINESS UNIT STATUS PAGE 3022 eiPal Valid 6/10 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³