Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
0,8 ±0,1
1
0,7
1,1
2
2,5
2
2,3 ±0,1
1
2,0
0,7 ±0,1
1,6 ±0,1
2,4 ±0,1
1,7 ±0,1
Test conditions
Value
Unit
1300
mW
400
mA
Continuous Forward Current
IF
300
mA
ESD Threshold/ Human Body
Model
VESD HBM
2000
V
Absolute Thermal Resistance
Junction to Solder Point
RθJS
6
K/W
TJ
125
°C
Power Dissipation
PDiss
Peak Forward Current
IF Peak
Junction Temperature
duty/ 10 @ 1 kHz
0,67 ±0,1
Optical Properties:
Scale - 8:1
Chip Technology
AlInGaN
Emitting Color
Daylight
Lens Type
Waterclear
Schematic:
3,0 ±0,1
General Information:
Operating Temperature
Polarity Mark
2
3,0 ±0,1
1
1
+
2
-40 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +85 °C
Moisture Sensitivity Level (MSL)
3
Scale - 8:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2019-11-18
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158303250A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3030
eiPal
Valid
1/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Properties
Test conditions
Chromaticity Coordinate X
cx
65 mA
Chromaticity Coordinate Y
cy
65 mA
Luminous Flux
ΦV
65 mA
Forward Voltage
VF
65 mA
Correlated Color Temperature
CCT
65 mA
Color Rendering Index
CRI
65 mA
Viewing Angle Phi 0°
2θ50% 65 mA
Viewing Angle:
Value
min.
typ.
max.
Unit
0.33872
0.34592
32
36
2.8
5000
80
lm
3
V
K
85
120
0°
- 60°
°
10°
100
Certification:
20°
30°
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [IEC 61249-2-21]
Halogen Free
Conform [JEDEC JS709B]
Relative Luminous Intensity (%)
90
40°
80
45°
70
50°
60
50
60°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2019-11-18
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158303250A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3030
eiPal
Valid
2/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Forward Current vs. Forward Voltage:
400,0
350,0
100
300,0
Forward Current [mA]
Relative Intensity [%]
80
60
40
20
0
400,00
450,00
500,00
550,00
600,00
650,00
700,00
750,00
250,0
200,0
150,0
100,0
Wavelength [nm]
50,0
0,0
1,5
2,0
2,5
3,0
Forward Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2019-11-18
DIN ISO 2768-1m
3,5
4,0
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158303250A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3030
eiPal
Valid
3/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Luminous Flux vs. Forward Current:
Derating Curve:
400
200,0
180,0
350
160,0
300
Forward Current (mA)
Luminous Flux [lm]
140,0
120,0
100,0
80,0
60,0
250
200
150
100
40,0
50
20,0
0
0,0
0
50
100
150
200
250
Forward Current [mA]
300
350
400
0
10
20
30
40
50
60
70
Ambient Temperature (℃)
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2019-11-18
DIN ISO 2768-1m
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158303250A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3030
eiPal
Valid
4/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Chromaticity diagram:
Chromaticity Properties:
CCT
0,39
0,38
5000K
5000K
507
0,37
Bin
Size
501
3 Step McAdam bin
502
5 Step McAdam bin
503
5 Step McAdam bin
504
5 Step McAdam bin
505
5 Step McAdam bin
506
ANSI bin
507
ANSI bin
508
ANSI bin
509
ANSI bin
CIE - y Coordinate
503
506
0,36
502
0,35
501
504 508
505
0,34
509
0,33
0,32
0,33
0,34
0,35
0,36
0,37
CIE - x Coordinate
Daylight
Black body line
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2019-11-18
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158303250A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3030
eiPal
Valid
5/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
P0
K0
W3
T
W1
close to center
B
A
W
F
N
P2
E1
D0
D
A
B0
E2
C
Top Cover
Tape
D1
A
P1
W2
T1
A0
T2
End
Feeding direction
Start
Polarity Mark
detail B
Carrier Tape
B
Cover Tape
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
No Component
min.100mm
Embossment
Cover Tape
min. 400mm
Packaging is reffered to the international standard IEC 60286-3:2013
Tape Type
2a
A0
(mm)
typ.
3,25
B0
(mm)
typ.
3,50
W
(mm)
+0,3/ -0,1
8,00
T
(mm)
ref.
0,22
T1
(mm)
ref.
0,10
T2
(mm)
typ.
K0
(mm)
typ.
0,80
P0
(mm)
±0,1
4,00
P1
(mm)
±0,1
4,00
P2
(mm)
±0,05
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
0,30
E1
(mm)
±0,1
1,75
E2
(mm)
min.
6,25
F
(mm)
±0,05
3,50
Material
Qty.
(pcs.)
Polystyrene
4000
165° - 180°
A
(mm)
± 2,0
178
B
(mm)
min.
1.5
C
(mm)
min.
12.8
D
(mm)
min.
20.2
N
(mm)
min.
50
W1
(mm)
+1,5
8.4
W2
(mm)
max.
14.4
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2019-11-18
DIN ISO 2768-1m
W3
(mm)
min.
7.9
W3
(mm)
max.
10.9
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158303250A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3030
eiPal
Valid
6/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
max. 60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³