Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
0,41 ±0,1
0,92 ±0,1
2
3
1
4
1,55
0,4
0,9
3
2,0 ±0,1
2
0,6 ±0,1
4
1,54 ±0,1
1
0,4 ±0,1
2,2 ±0,1
Properties
Value
Unit
Power Dissipation
PDiss
580
mW
Peak Forward Current
IF Peak
300
mA
Continuous Forward Current
IF
180
mA
ESD Threshold/ Human Body
Model
VESD HBM
2000
V
Optical Properties:
1,75
2,1
1,9
5,6 ±0,1
Chip Technology
InGaN
Emitting Color
Sunrise
Lens Type
Waterclear
Scale - 6:1
5,3 ±0,1
0,6 ±0,1
0,2 ±0,1
Schematic:
General Information:
Operating Temperature
3
1
4
3,0 ±0,1
2
1
+
3
-40 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-40 up to +85 °C
Moisture Sensitivity Level (MSL)
3
Polarity Mark
Scale - 6:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2020-04-21
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158563227A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
5630
eiPal
Valid
1/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Properties
Chromaticity Coordinate X
Test conditions
cx
65 mA
Chromaticity Coordinate Y
cy
65 mA
Luminous Flux
ΦV
65 mA
Forward Voltage
VF
65 mA
Correlated Color Temperature
CCT
65 mA
Color Rendering Index
CRI
65 mA
Viewing Angle Phi 0°
2θ50% 65 mA
Viewing Angle:
Value
min.
typ.
max.
Unit
0.45266
0.40306
25
32
2.8
2700
80
lm
3.2
V
K
85
120
0°
- 60°
°
10°
100
Certification:
20°
30°
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform[IEC 61249-2-21]
Halogen Free
Conform [JEDEC JS709B]
Relative Luminous Intensity (%)
90
40°
80
45°
70
50°
60
50
60°
40
70°
30
20
80°
10
90°
-90
-45
0
10
20
30
40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2020-04-21
DIN ISO 2768-1m
50
60
70
80
90
100
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158563227A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
5630
eiPal
Valid
2/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Spectral:
Forward Current vs. Forward Voltage:
300,0
250,0
100
Forward Current [mA]
Relative Intensity [%]
80
60
40
20
200,0
150,0
100,0
0
400,00
450,00
500,00
550,00
600,00
Wavelength [nm]
650,00
700,00
750,00
50,0
0,0
2,5
2,7
2,9
3,1
3,3
Forward Voltage [V]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2020-04-21
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158563227A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
5630
eiPal
Valid
3/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Luminous Flux vs. Forward current:
Derating Curve:
200
180
120,0
160
100,0
Forward Current (mA)
Luminous Flux [lm]
140
80,0
60,0
120
100
80
60
40,0
40
20,0
20
0
0,0
0
50
100
150
200
250
300
0
10
20
30
40
50
60
70
Ambient Temperature (℃)
80
90
100
Forward Current [mA]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2020-04-21
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158563227A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
5630
eiPal
Valid
4/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Chromaticity diagram:
Chromaticity Properties:
CCT
0,45
0,44
2700K
2700K
0,43
277
276
0,42
CIE - y Coordinate
272
Bin
Size
271
3 Step McAdam bin
272
5 Step McAdam bin
273
5 Step McAdam bin
274
5 Step McAdam bin
275
5 Step McAdam bin
276
ANSI bin
277
ANSI bin
278
ANSI bin
279
ANSI bin
273
271
0,41
275
274
0,40
278
279
0,39
0,38
0,37
0,42
0,43
0,44
0,45
0,46
0,47
0,48
0,49
0,50
CIE - x Coordinate
Sunrise
Black body line
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2020-04-21
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158563227A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
5630
eiPal
Valid
5/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel: [mm]
P0
A
K0
T
W3
E1
P2
W1
close to center
B0
E2
C
Top Cover
Tape
D1
A
P1
W2
T1
A0
End
N
W
A
F
D
B
T2
Polarity Mark
Start
Feeding direction
Carrier Tape
detail B
Cover Tape
B
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min.160mm
Components
No Component
min.100mm
Embossment
Cover Tape
min. 400mm
Packaging is referred to the international standard IEC 60286-3:2019
Tape Type
2a
A0
(mm)
typ.
3,25
B0
(mm)
typ.
5,90
W
(mm)
+0,3/ -0,1
12,00
T
(mm)
ref.
0,25
T1
(mm)
ref.
0,10
T2
(mm)
typ.
1,2
K0
(mm)
typ.
0,95
P0
(mm)
±0,2
4,00
P1
(mm)
±0,2
4,00
P2
(mm)
±0,05
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
1,50
E1
(mm)
±0,1
1,75
E2
(mm)
min.
10,25
F
(mm)
±0,05
5,50
Material
Qty.
(pcs.)
A
(mm)
± 2,0
178,00
B
(mm)
min.
1,50
C
(mm)
min.
12,80
D
(mm)
min.
20,20
N
(mm)
min.
60,00
W1
(mm)
+ 2,0
12,40
W2
(mm)
max.
18,40
W3
(mm)
min.
11,90
W3
(mm)
max.
15,40
Material
Polystyrene
Polystyrene
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.000
2020-04-21
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-SWTP SMT White Top view
PLCC
ORDER CODE
158563227A
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
5630
eiPal
Valid
6/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
Ts min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
Liquidous Temperature
tL
Preheat Area
TC –5°C
Value
Preheat Temperature Min
max. 60 - 120 seconds
3 °C/ second max.
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
≥ 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³
