Dimensions: [mm]
Recommended Land Pattern: [mm]
Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test conditions
Value
Unit
6600
mW
5000
mA
Continuous Forward Current
IF
3000
mA
ESD Threshold/ Human Body
Model
VESD HBM
1000
V
1,96 ±0,1
Power Dissipation
PDiss
0,94 ±0,1
Peak Forward Current
IF Peak
2,2
3,3
3,3 ±0,1
1,2
duty/ 10 @ 10 kHz
Optical Properties:
0,4 ±0,1
0,4
Chip Technology
AlGaAs
Emitting Color
Infrared
Lens Type
Diffused
Plastic Housing Color
3,5 ±0,1
Black
1,77 ±0,1
Scale - 7:1
General Information:
Schematic:
Operating Temperature
Anode Mark
-20 up to +85 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 90 % RH
Storage Conditions (for single
parts)
-20 up to +85 °C
3
2
IR
LEDs emit high intensity IR light.
not look directly into the LED during operation.
This can be harmful to your eyes.
Wear protective eyewear.
Please follow safety precautions given in
IEC 60825-1 and IEC 62471.
Keep out of reach of children.
Avoid direct eye and skin exposure to LED!
CAUTION – IR
+
1
3,5 ±0,1
2,7 ±0,1
Moisture Sensitivity Level (MSL)
3,0 ±0,1
Scale - 7:1
Do
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-10-25
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-VCSL Vertical Cavity surface
emitting Laser
ORDER CODE
159353940A6300
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
1/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Properties:
Test conditions
Value
min.
typ.
max.
950
λPeak
3000 mA
930
940
Radiant Flux
Φe
3000 mA
1600
1900
Forward Voltage
VF
3000 mA
2
Spectral Bandwidth
Δλ
3000 mA
2
Peak Wavelength
Slope Efficiency
SE
Energy Conversion Efficiency
ηEC
0.6
0.8
Unit
nm
mW
2.3
V
nm
1.1
W/A
3000 mA
31
%
Viewing Angle (X-Axis)
2θ50%,X 3000 mA
60
°
Viewing Angle (Y-Axis)
2θ50%,Y 3000 mA
Threshold Current
ITh
45
0.3
0.75
Certification:
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
0°
-30
°
1.1
A
Relative Intensity (%)
Properties
Viewing Angle X Direction:
45°
50°
55°
60°
65°
70°
75°
80°
85°
90°
-90
-45
0
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-10-25
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-VCSL Vertical Cavity surface
emitting Laser
ORDER CODE
159353940A6300
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
2/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Viewing Angle Y Direction:
Spectral:
100
-20
0°
Relative Intensity [%]
80
45°
Relative Intensity (%)
50°
55°
60°
65°
60
40
70°
75°
20
80°
85°
90°
-90
-45
0
0
800
850
900
950
1000
1050
1100
Wavelength [nm]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-10-25
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-VCSL Vertical Cavity surface
emitting Laser
ORDER CODE
159353940A6300
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
3/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Forward Current vs. Forward Voltage:
Radiant Flux vs. Forward Current:
3,0
4500,0
4000,0
2,5
3000,0
Relative Radiant Flux
Forward Current [mA]
3500,0
2500,0
2000,0
1500,0
2,0
1,5
1,0
1000,0
0,5
500,0
0,0
0,0
0,0
0,5
1,0
1,5
Forward Voltage [V]
2,0
2,5
0
1000
2000
3000
Forward Current [mA]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-10-25
DIN ISO 2768-1m
4000
5000
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-VCSL Vertical Cavity surface
emitting Laser
ORDER CODE
159353940A6300
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
4/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Derating Curve:
3,5
3
Forward Current [A]
2,5
2
1,5
1
0,5
0
0
20
40
60
Ambient Temperature [˚C]
80
100
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-10-25
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-VCSL Vertical Cavity surface
emitting Laser
ORDER CODE
159353940A6300
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
5/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel: [mm]
P0
A
K0
P2
W3
T
E1
D0
W1
close to center
B0
N
A
W
E2
F
D
B
C
Top Cover
Tape
D1
A
P1
W2
T1
A0
T2
End
Start
Feeding direction
Carrier Tape
Cover Tape
detail B
B
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min. 160mm
Components
No Component
min. 100mm
Embossment
Cover Tape
min. 400mm
Polarity Mark
Packaging is referred to the international standard IEC 60286-3:2019
Tape Type
Tolerance
Value
2a
A0
(mm)
typ.
3,80
B0
(mm)
typ.
3,80
W
(mm)
+0,3/ -0,1
12,00
T
(mm)
ref.
0,28
T1
(mm)
ref.
0,10
T2
(mm)
typ.
2,00
K0
(mm)
typ.
1,80
P0
(mm)
±0,1
4,00
P1
(mm)
±0,1
8,00
P2
(mm)
±0,05
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
1,50
E1
(mm)
±0,1
1,75
E2
(mm)
min.
10,25
F
(mm)
±0,05
5,50
Material
Qty.
(pcs.)
Polystyrene
500
165° - 180°
B
(mm)
min.
1,50
C
(mm)
typ.
13,00
D
(mm)
min.
20,20
N
(mm)
min.
60,00
W1
(mm)
+ 2,0
12,40
W2
(mm)
max.
18,40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ZAn
001.001
2021-10-25
DIN ISO 2768-1m
W3
(mm)
min.
11,90
W3
(mm)
max.
15,40
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
Tolerance
Value
A
(mm)
± 2,0
178,00
12 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-VCSL Vertical Cavity surface
emitting Laser
ORDER CODE
159353940A6300
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
3535
eiPal
Valid
6/10
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
max. 60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³
工商网监
湘ICP备2023018690号
