418127270902

SPECIFICATION 7,62 7,62 ±0,5 Hole Pattern 2,54 2,54 O 0,8 >Contact Rating Switching : Non-Switching : >Contact Resistance Initial: After life test : >Insulation Resistance : >Dielectric Strength : >Operation Force : >Mechanical Life : >Electrical Life : >Raise Actuator type 25mA, 24VDC 100mA, 50VDC 50mΩ max. 100mΩ max. min. 100MΩ at 500VDC 500VAC for 1 minute 600g max. 2000 cycles 2000 cycles / 25mA, 24VDC MATERIAL >Cover : >Base : >Actuator : >Contact : >Terminal : L 0,6 q 1,0 3,5 3,0 Wiring Diagram PA9T UL 94 V-0, color Black PA9T UL 94 V-0, color Black PA66 UL 94 V-0, color White Gold Plated Gold Plated 3,5 SOLDERING INFORMATION 0,5 >Terminal in THT version >Wave soldering 260°C 10sec. max >Hand soldering with 30W or under at 350°C for 3 sec. max >Keep in “off” position during soldering >Ultrasonic cleaning not re-commended >Any inflow of Flux into the switch may influence the contact function 0,25 1,9 ENVIRONMENTAL 6,2 ±0,1 Storage condition : Operation condition : Compliance : -40°C ~ +85°C -40°C ~ +85°C Lead Free , ROHS , Reach PACKAGING INFORMATION >Tube >On delivery in “off” position DIMENSION Scale - 2:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 REV. FILE DATE BY www.we-online.de eiSos@we-online.de CREATED DaF No. of Poles Dim. L (mm) No. of Poles Dim. L (mm) 1 3.48 7 18.72 CHECKED JLi 2 6.02 8 21.26 3 8.56 4 11.10 9 23.80 GENERAL TOLERANCE DIN ISO 2768-1m DESCRIPTION 5 13.64 10 26.34 6 16.18 12 31.42 SCALE PROJECTION METHOD 2:1 TECHNICAL REFERENCE _________ WS-DITV Raise actuator without top tape sealed ORDER CODE SIZE STATUS DATE IC type, THT Released 2015-05-07 418 127 270 9xx BUSINESS UNIT eiCan PAGE 1 /1 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.