430481031816

TECHNICAL CHARACTERISTICS 2 2,6 5,4 1 3 MATERIAL >Cover: Stainless Steel >Stem: LCP UL 94V-0 >Frame: LCP UL 94V-0, color Black >Contact: Stainless Steel with silver >Terminal: Brass with silver plating >Tape: Polyimide tape 4 5,0 9,0 P.C.B. MOUNTING PLAN 0,15 2,0 H u0,2 O 3,0 6,2 ±0,2 h 0,10 Ref. SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max 2 1 WASHABLE DEFINITION Please do not submerse washable products into water or cleaning agents or put them in locations exposed to water or liquids completely. When cleaning by hand (brushing), please do not use excessive force on our switch to avoid malfunction afterwards, because you could deform function relevant areas or you could damage sealing functions. Do not clean washable series immediately after soldering. The cleaning agent may be absorbed into the switch through respiration while the switch cools. 0,7 5,8 P.C.B. MOUNTING FACE 8,0 ±0,2 4 3 3 4 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach 6,2 ±0,2 2 4,0 6,0 ±0,2 SCHEMATIC 1 SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 2OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Stroke: 0.25 + 0.2 mm / - 0.1 mm >Bounce 10ms max. PACKAGING INFORMATION >Tape & Reel PN Scale - 5:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. Projection e d c Name Jelisarow Hsu Bounce 10ms max. 14-04-11 DaF WE Würth Elektronik eiCan washable definition 14-01-31 DaF CAD eiCan warning text 11-10-28 WJ REV FILE DATE BY EDV NO 4304x1xxx8x6.dft b a 430 481 xxx 816 160g ± 50gf 430 471 xxx 826 260g ± 50gf 430 451 xxx 836 360g ± 50gf GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Date Drawn 09-09-10 remove Contact cladding 14-11-03 DaF Checked 09-09-10 revised MatchCode 14-07-24 AL Force Color of Stem Life cycle Black White Salmon 1.000.000 500.000 200.000 -025 H ØD 2.5 3.0 -031 H ØD 3.1 3.0 -035 H ØD 3.5 3.0 Basic material DESCRIPTION WS-TASV 6x6mm washable Tact Switch, SMD version Scale 5:1 Position Drawing.- No. 4304x1xxx8x6 SIZE A4 System :Solid Edge V20