434111043826

TECHNICAL CHARACTERISTICS 1,5 SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 1OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Stroke: 0.25 +/- 0.1 mm >Bounce 10ms max. 4,4 9,0 0,5 max. P.C.B. Layout 2 Schematic H u0,15 0,15 1 1,5 3,5 3,0 MATERIAL >Cover: Stainless Steel >Stem: LCP UL 94V-0 >Frame: LCP UL 94V-0 >Contact: Stainless Steel with silver >Terminal: brass with silver plating SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max h 0,10 Ref. 3,5 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach PACKAGING INFORMATION >Tape & Reel 1 2 1,0 PN Force 434 121 xxx 816 434 111 xxx 826 434 121 xxx 836 160g ± 50gf 260g ± 70gf 360g ± 90gf Color of Stem Life cycle Black White Salmon 50.000 30.000 50.000 Height H -043 -043 -043 -050 -050 -050 6,0 8,0 ±0,15 Scale - 5:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Projection d remove Contact cladding c revised MatchCode 14-07-24 AL Bounce 10ms max. 14-04-11 DaF In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions b a or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV warning text FILE GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Date Drawn 10-07-08 Name Jelisarow Checked 10-07-08 Hsu Basic material DESCRIPTION WS-TASV 6,0x3,5mm Tact Switch_SMD version 14-11-04 DaF 11-10-28 WJ DATE BY WE eiCan CAD 5:1 Würth Elektronik Scale eiCan Drawing.- No. 4341x1xxx8x6 EDV NO 434131xxx8x6.dft Position SIZE A4 System :Solid Edge V20