Recommended Hole Pattern: [mm]
2
3
7,5
1
5,0
0,6 ±0,1
3,0
8,0
Dimensions: [mm]
2
q1,5
Travel 2,0 ±0,3
2,0 ±0,2
B
A
3
1
5,0
1,2
+0,1
-0,05
3,5 ±0,2
h
8,5
9,0
Schematic:
0,3 ±0,05
1,2
Scale - 4:1
COM
1
2
0,3 max.
3,5 ±0,2
3
non-shorting
Scale - 4:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
MTH
001.001
2024-01-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WS-SLSV SMT Mini Slide Switch,
Same Side Connection
ORDER CODE
450406020024
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
9.0 x 3.5 mm
eiCan
Valid
1/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Material Properties:
General Information:
Cover Material
Stainless Steel
Actuator Material
Operating Temperature
PA9T
Actuator Flammability Rating
Storage Conditions (in original
packaging)
UL94 HB
Actuator Color
Black
Frame Material
LCP
Frame Flammability Rating
-40 up to +85 °C
< 40 °C ; < 75 % RH
Moisture Sensitivity Level (MSL)
1
Certification:
UL94 V-0
Black
RoHS Approval
Compliant [2011/65/EU&2015/863]
Contact Material
Copper Alloy
REACh Approval
Conform or declared [(EC)1907/2006]
Contact Plating
Silver
Halogen Free
Conform [IEC 61249-2-21]
Terminal Material
Copper Alloy
Halogen Free
Conform [JEDEC JS709B]
Terminal Plating
Silver
Frame Color
Electrical Properties:
Properties
Value
Unit
Rated Current Switching
IR
Test conditions
300
mA
Tol.
Rated Voltage Switching
VR
6
V (DC)
Contact Resistance Initial
R
70
mΩ
max.
Contact Resistance After Life
Test
R
200
mΩ
max.
min.
Insulation Resistance
RISO 250 V (DC)
100
MΩ
Withstanding Voltage
1 min
250
V (AC)
Value
Unit
Tol.
350
g
max.
20000
Steps
Mechanical Properties:
Properties
Test conditions
Operation Force
Electrical Life 1)
300mA / 6 V (DC)
Schematic
SPDT
Switching Function
On-On
Connection Type
Same Side Connection
1)
Step: each movement
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
MTH
001.001
2024-01-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WS-SLSV SMT Mini Slide Switch,
Same Side Connection
ORDER CODE
450406020024
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
9.0 x 3.5 mm
eiCan
Valid
2/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
P2
T
E1
P0
D0
A
Packaging Specification - Reel: [mm]
K0
W3
F
W1
close to center
D
A
N
B0
E2
W
B
C
Top Cover
Tape
A
A0
D1
P1
End
T1
T2
Feeding direction
W2
Carrier Tape
Start
Cover Tape
detail B
B Cover Tape
Chip Cavity
Sprocket Hole
No Component
min. 160mm
Components
No Component
min. 100mm
Embossment
Cover Tape
min. 400mm
Tape Type
Tolerance
Value
2a
A0
(mm)
typ.
8,50
B0
(mm)
typ.
9,00
W
(mm)
±0,30
24,00
T
(mm)
ref.
0,35
T1
(mm)
ref.
0,10
T2
(mm)
typ.
6,20
K0
(mm)
typ.
5,80
P0
(mm)
±0,1
4,00
P1
(mm)
±0,1
12,00
P2
(mm)
±0,1
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
1,40
E1
(mm)
±0,1
1,75
E2
(mm)
min.
22,25
F
(mm)
±0,1
11,50
Material
Polystyrene
Qty.
(pcs.)
900
165° - 180°
Tolerance
Value
A
(mm)
± 2,0
330,00
B
(mm)
min.
1,50
C
(mm)
min.
12,80
D
(mm)
min.
20,20
N
(mm)
min.
60,00
W1
(mm)
+- 0,2
24,50
W2
(mm)
max.
30,40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
MTH
001.001
2024-01-10
DIN ISO 2768-1m
W3
(mm)
min.
24,40
W3
(mm)
max.
26,40
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-off force
Tape width
24 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WS-SLSV SMT Mini Slide Switch,
Same Side Connection
ORDER CODE
450406020024
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
9.0 x 3.5 mm
eiCan
Valid
3/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³
