600636001

This all-in-one UMRF tool is designed to mate and unmate UMRF plug with the receptacle to assure that UMRF plug would not be damaged with inappropriate usage ! Order Code : 600636001 Material : Stainless steel • How to mate the UMRF plug with the receptacle ? 1. Insert the tool to the flanges at UMRF plug Special Notes : Flange 2. Align the plug to mating axes of the receptacle, and insert vertically until "click" heard to complete mated connection (Note 1) Note 1 : Do not apply extreme angle when you insert the UMRF Plug to the receptacle Note 2 : Never pull UMRF directly by hands since it might be damaged Note 3 : While UMRF plug is being mated with the receptacle, please do not apply pull force higher than defined values indicated in below diagram • How to unmate the UMRF plug from the receptacle ? 3. Insert the tool to the flanges at UMRF plug 2N max. 4N max. 2N max. Applicable Products : WR-UMRF 6362 series 4. Pull the plug off vertically (Note 2) Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 www.we-online.de eiSos@we-online.de CREATED CHECKED BMa OTs DESCRIPTION UMRF Insertion & Extraction Tool Manual Instruction 600 636 001 REVISION 002.001 STATUS DATE 2020-10-06 BUSINESS UNIT eiCan This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.