Dimensions: [mm]
Recommended Land Pattern: [mm]
1
pl
2
End
2
2 ±0.10
O
1
0,50 x 0,20 ±0.25
2
End
2,10
0,89
4,60 ±0.25
7,40
L ±0.30
1
6,20 ±0.25
2 ±0.10
Pl ±0.20
4 ±0.15
General tolerance ±0.05
Pattern Properties:
Properties
Pin to Pin (Middle)
Article Properties:
Properties
Value
Pins
Value
Unit
42
mm
pl
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
CPo
002.003
2023-09-20
DIN ISO 2768-1m
PROJECTION
METHOD
Unit
DESCRIPTION
44
Pin to Pin (Middle)
Pl
42
mm
Length
L
44.6
mm
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-PHD SMT Straight Dual
Bottom Entry Socket Header
ORDER CODE
621044242921
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
2.00 mm
eiCan
Valid
1/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Kind Properties:
Properties
Pitch
P
Durability
Value
Unit
2
mm
50 Cycles
Material Properties:
Insulator Material
PA9T
Insulator Flammability Rating
UL94 V-0
Insulator Color
Black
Contact Material
Copper Alloy
Contact Plating
Gold
Contact Type
Stamped
General Information:
Operating Temperature
-40 up to +105 °C
Electrical Properties:
Properties
Rated Current
Test conditions
Value
Unit
2
A
200
V (AC)
500
V (AC)
R
20
mΩ
max.
RISO
1000
MΩ
min.
IR
Working Voltage
Withstanding Voltage
Contact Resistance
Insulation Resistance
1 min
Tol.
Certification:
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
UL Approval
E323964
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
CPo
002.003
2023-09-20
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-PHD SMT Straight Dual
Bottom Entry Socket Header
ORDER CODE
621044242921
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
2.00 mm
eiCan
Valid
2/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
W
TUB
TUB
detail A
H
L
Packaging Specification - Tube: [mm]
TUB
Packaging Specification - Tube: [mm]
A
T
TUB
Tube
NB: Actual packaging may slightly differ from datasheet
LTUB (mm)
WTUB (mm)
HTUB (mm)
TTUB (mm)
typ.
600
typ.
8.3
typ.
6.4
typ.
0.8
Packaging
Unit
pcs.
130
Material
Plastic
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
CPo
002.003
2023-09-20
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-PHD SMT Straight Dual
Bottom Entry Socket Header
ORDER CODE
621044242921
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
2.00 mm
eiCan
Valid
3/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
H
IC
Packaging Specification - Carton: [mm]
L
IC
W
H
C
IC
L
C
W
C
NB: Actual packaging may slightly differ from datasheet
LIC (mm)
WIC (mm)
HIC (mm)
LC (mm)
WC (mm)
HC (mm)
typ.
630
typ.
170
typ.
150
typ.
650
typ.
330
typ.
190
No. of tube
outer packaging
tube.
360
Outer
packaging unit
pcs.
4680
Material
Paper
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
CPo
002.003
2023-09-20
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-PHD SMT Straight Dual
Bottom Entry Socket Header
ORDER CODE
621044242921
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
2.00 mm
eiCan
Valid
4/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
