Dimensions: [mm]
Recommended Land Pattern: [mm]
pl
0,89
1
1
End
2,03
±0
.2
5
2
O
2
2
3,42
End
q 0,50 ±0.25
2 ±0.10
L ±0.40
1
5
2,95
CAP
0
4 ±0.15
3,30
7,50
L1 ±0.20
1,27 ±0.25
Pl ±0.20
2,80 ±0.25
1,2
l1
O
4 ±0.20
2 ±0.15
1 ±0.25
1,27 ±0.25
General tolerance ±0,05
6,22 ±0.25
2 ±0.15
Scale 5:1
Pattern Properties:
Properties
Scale 3:1
Value
Unit
Pin to Pin (Middle)
pl
6
mm
Length 1)
l1
4
mm
1)
Peg to Peg (middle)
Article Properties:
Properties
Value
Pins
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
002.001
2022-01-25
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
8
Pl
6
mm
Length
L
8
mm
Length 1)
L1
4
mm
Peg to Peg (middle)
REVISION
CPo
Unit
Pin to Pin (Middle)
1)
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-PHD SMT Angled Dual Pin
Header
ORDER CODE
621308284521
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
2.00 mm
eiCan
Valid
1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Article Properties:
General Information:
Pl
L
Order Code
2 mm
4 mm
621304284521
4 mm
6 mm
621306284521
6 mm
8 mm
621308284521
Operating Temperature
-40 up to +105 °C
Electrical Properties:
Properties
Test conditions
Value
IR
8 mm
10 mm
621310284521
Rated Current
10 mm
12 mm
621312284521
Working Voltage
12 mm
14 mm
621314284521
Withstanding Voltage
14 mm
16 mm
621316284521
Contact Resistance
18 mm
20 mm
621320284521
Insulation Resistance
22 mm
24 mm
621324284521
26 mm
28 mm
621328284521
30 mm
32 mm
621332284521
RoHS Approval
Compliant [2011/65/EU&2015/863]
Conform or declared [(EC)1907/2006]
38 mm
40 mm
621340284521
42 mm
44 mm
621344284521
UL Approval
Pitch
Durability
Coplanarity
P
Value
Unit
2
mm
Tol.
2
A
200
V (AC)
500
V (AC)
R
20
mΩ
max.
RISO
1000
MΩ
min.
Value
Unit
Tol.
2
A
200
V (AC)
500
V (AC)
R
20
mΩ
max.
RISO
1000
MΩ
min.
1 min
Electrical Properties:
Rated Current
µm
E323964 [E323964]
Properties
500 Mating cycles
100
max.
Test conditions
IR
Working Voltage
Withstanding Voltage
Material Properties:
Insulator Material
Insulator Flammability Rating
Insulator Color
Contact Material
Contact Plating
Contact Type
Contact Resistance
PA9T
Tol.
Certification:
REACh Approval
Properties
Unit
Insulation Resistance
1 min
UL94 V-0
Black
Copper Alloy
Gold
Stamped
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
CPo
002.001
2022-01-25
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-PHD SMT Angled Dual Pin
Header
ORDER CODE
621308284521
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
2.00 mm
eiCan
Valid
2/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel in Carton: [mm]
P0
K0
P2
E1
D0
T
W
B0
E2
H
IC
F
A
Top Cover
Tape
W
L
IC
IC
T1
D1
T2
P1
Feeding direction
End
Start
Carrier Tape
Cover Tape
C
A0
H
A
W
L
C
No Component
min. 160mm
Components
B0
typ.
8.9
W
+0.3/-0.1
24
T
max.
0.6
T1
max.
0.1
T2
max.
7.8
K0
typ.
7.2
P0
±0.1
4
P1
±0.1
20
NB: Actual packaging may slightly differ from datasheet
No Component
min. 100mm
Cover Tape
min. 400mm
NB: Actual packaging may slightly differ from datasheet
A0
typ.
12.7
C
P2
±0.1
2,0
D0
+0.1/ -0
1.5
D1
min.
1,5
E1
±0.1
1.75
E2
min.
22.25
F
±0.1
11.5
Tape Type 2a
Polystyrene
VPE / packaging unit
pcs.
450
LC (mm)
WC (mm)
HC (mm)
typ.
360
typ.
330
typ.
365
No. of reel
outer packaging
reel.
9
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
CPo
002.001
2022-01-25
DIN ISO 2768-1m
Packaging
Unit
pcs.
4050
Material
Paper
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-PHD SMT Angled Dual Pin
Header
ORDER CODE
621308284521
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
2.00 mm
eiCan
Valid
3/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
