63012242121508

Dimensions: [mm] Recommended Land Pattern: [mm] 6,8 ±0,05 6,8 ±0,05 0,38 4,3 ±0,05 P.C.B End O 0,81 6,5 0,81 Top View A-A O Ø 0,76 A 10 4,1 ±0,05 2 8 Hex 4,1 ±0,05 1,02 1,73 4,3 ±0,05 0,9 ±0,05 Bottom View ,2 1,73 P.C.B Thickness: 1,6 mm Recommended Panel Cutout: [mm] O6 ,35 q 6,35 ±0, 0 5 12,7 1,4 1,65 3,81 A Panel Thickness: 2-2,4 mm 1/4-36UNS-2A Article Properties: Properties PCB Thickness Panel Thickness t Value Unit 1.6 mm 2 - 2.4 mm CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE OTs 001.000 2020-04-28 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-RPSMA Reverse Polarity SMA PCB End Launch Jack ORDER CODE 63012242121508 SIZE/TYPE BUSINESS UNIT STATUS PAGE 6.35 SQ Round Post Rear Mount Bulkhead for PCB 1.6mm eiCan Valid 1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Material Properties: Electrical Properties: Insulator Material PTFE Properties Value Unit Tol. Insulator Color White Contact Resistance After Test 3) R DC 0.2 V / 1 A 4 mΩ max. Center Contact Material Brass Contact Resistance Initial 4) R DC 0.2 V / 1 A 2 mΩ max. R DC 0.2 V / 1 A 2 mΩ max. Center Contact Plating Gold, min. 0.076µm over Nickel Body Material Brass Body Plating Gold, min. 0.076µm over Nickel Nut Material Brass Nut Plating Gold, min. 0.076µm over Nickel Contact 1) 2) 3) 4) 5) Brass Lock Washer Plating Gold, min. 0.076µm over Nickel Kind Properties: MIL-STD-348 Connector Type VSWR in application varies decisively according to PCB layout. Center Contact Center Contact Outer Contact Outer Contact Mechanical Properties: Lock Washer Material Interface Resistance After Test 5) Test conditions Properties Value Unit Tol. Center Contact Retention (Axial) 26.7 N min. Mating Cycle 500 Cycles Recommended Mating Torque 57 N*cm RP SMA Gender Certification: Jack Orientation Type Straight General Information: Operating Temperature -65 up to +165 °C RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform[IEC 61249-2-21] Halogen Free Conform [JEDEC JS709B] Electrical Properties: Properties Test conditions Impedance Z Frequency Range f VSWR 1) Insertion Loss Insulation Resistance IL Unit 50 Ω Tol. DC~6 GHz 1.2 DC~6 GHz 0.14 dB max. 5000 MΩ min. 500 V (AC) in 60 sec. R Value DC~6 GHz RISO 500 V (DC) in 120 sec. Withstanding Voltage Contact Resistance Initial 2) DC~6 GHz DC 0.2 V / 1 A 1000 3 max. V (RMS) min. mΩ max. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE OTs 001.000 2020-04-28 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-RPSMA Reverse Polarity SMA PCB End Launch Jack ORDER CODE 63012242121508 SIZE/TYPE BUSINESS UNIT STATUS PAGE 6.35 SQ Round Post Rear Mount Bulkhead for PCB 1.6mm eiCan Valid 2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tray and Carton: [mm] TRA W B0 H C TRA W1 W2 TRA Packaging Specification - Tray: [mm] W L2 A0 L1 L L C C TRA H TRA TRA TRA LTRA (mm) L1TRA (mm) L2TRA (mm) WTRA (mm) W1TRA (mm) W2TRA (mm) HTRA (mm) typ. 296 typ. 197.4 typ. 32.9 typ. 214 typ. 175.14 typ. 19.46 typ. 14 Packaging Unit pcs. 70 Material LC (mm) WC (mm) HC (mm) Plastic typ. 310 typ. 230 typ. 360 No. of tray tra. 30 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE OTs 001.000 2020-04-28 DIN ISO 2768-1m Packaging Unit pcs. 2100 Material Paper PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-RPSMA Reverse Polarity SMA PCB End Launch Jack ORDER CODE 63012242121508 SIZE/TYPE BUSINESS UNIT STATUS PAGE 6.35 SQ Round Post Rear Mount Bulkhead for PCB 1.6mm eiCan Valid 3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 1) 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. 1) refer to IPC/JEDEC J-STD-020D refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 1) 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³