Recommended Land Pattern: [mm]
0,6 ±0.10
0,6 ±0.15
0.0
5
.05
,5 ±0
O0
O
3,1
2,6 ±0.15
1,8 ±0.25
2±
Cut out prohibition area
0,15 ±0.10
2,6 ±0.15
3 ±0.15
1,05
1
2,2
2,1 ±0.25
1,9
0,35 ±0.15
1,25 ±0.15
0,25 ±0.10
4
1
General tolerance ±0.05
Scale - 18:1
Scale - 10:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
KrWu
002.000
2023-09-12
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WR-UMRF UMRF PCB Receptacle
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
636101112001
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SMT with 3 Pads
eiCan
Valid
1/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Material Properties:
Certification:
Insulator Material
Insulator Color
Insulator Flammability Rating
LCP
RoHS Approval
Compliant [2011/65/EU&2015/863]
Natural
REACh Approval
Conform or declared [(EC)1907/2006]
UL94 V-0
Halogen Free
Conform [JEDEC JS709B]
Center Contact Material
Brass
Halogen Free
Conform [IEC 61249-2-21]
Center Contact Plating
Gold over Nickel
Shell Material
Phosphor Bronze
Shell Plating
Gold over Nickel
Connector Type
UMRF
General Properties:
Operating Temperature
-40 up to +90 °C
Electrical Properties:
Properties
Test conditions
Impedance
Z
Frequency Range
f
VSWR
Insertion Loss
IL
VSWR 1
Insertion Loss
Insulation Resistance
Withstanding Voltage
IL
DC~6 GHz
Value
Unit
50
Ω
Tol.
DC~6 GHz
DC~3 GHz
1.3
DC~3 GHz
0.3
3~6 GHz
1.4
3~6 GHz
0.6
RISO 100 V (DC) in 120 sec.
500
200 V (AC) in 60 sec.
200
max.
dB
max.
max.
dB
max.
MΩ
min.
V (RMS) min.
VSWR: The VSWR in application varies decisively according to PCB layout
Mechanical Properties:
Properties
Value
Unit
Mating Cycle
30
Cycles
Tol.
Un-Mating Force Initial
5
N
min.
Un-Mating Force After Test
3
N
min.
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
KrWu
002.000
2023-09-12
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WR-UMRF UMRF PCB Receptacle
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
636101112001
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SMT with 3 Pads
eiCan
Valid
2/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
Packaging Specification - Reel: [mm]
P0
A
K0
P2
E1
D0
T
W3
A
W
B0
E2
B
N
D
F
W1
close to center
C
Top Cover
Tape
T1
D1
A
W2
T2
A0
P1
Carrier Tape
Start
Feeding direction
End
detail B
Cover Tape
B
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min. 160mm
Components
No Component
min. 100mm
Embossment
Cover Tape
min. 400mm
NB: Actual packaging may slightly differ from datasheet
Packaging is referred to the international standard IEC 60286-3:2019
A0
typ.
3.1
B0
typ.
2.7
W
+0.3/-0.1
12
T
max.
0.4
T1
max.
0.1
T2
max.
2.1
K0
typ.
1.35
P0
±0.1
4
P1
±0.1
8
P2
±0.05
2,0
D0
+0.1/ -0
1.5
D1
min.
1,5
E1
min.
1.75
E2
min.
10.25
F
±0.05
5.5
Tape Type 2a
Polystyrene
VPE / packaging unit
pcs.
5000
165° - 180°
Tolerance
Value
A
(mm)
± 2,0
330,00
B
(mm)
min.
1,50
C
(mm)
min.
12,80
D
(mm)
min.
20,20
N
(mm)
min.
60,00
W1
(mm)
+ 2,0
12,40
W2
(mm)
max.
18,40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
KrWu
002.000
2023-09-12
DIN ISO 2768-1m
W3
(mm)
min.
11,90
W3
(mm)
max.
15,40
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
WR-UMRF UMRF PCB Receptacle
Pull-off force
Tape width
12 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
636101112001
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SMT with 3 Pads
eiCan
Valid
3/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
H
C
Packaging Specification - Carton: [mm]
W
C
L
C
NB: Actual packaging may slightly differ from datasheet
LC (mm)
WC (mm)
HC (mm)
typ.
350
typ.
350
typ.
296
No. of reel
outer packaging
reel.
16
Packaging
Unit
pcs.
80000
Material
Paper
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
KrWu
002.000
2023-09-12
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WR-UMRF UMRF PCB Receptacle
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
636101112001
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SMT with 3 Pads
eiCan
Valid
4/8
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³