66011102111302

Dimensions: [mm] Recommended Land Pattern: [mm] q 4,2 ±0.05 2 1,1 ±0.05 2 q 3,5 6,9 Ø 3,5 +0.07 -0 O 1 ±0.05 0 Ø 0,7 3,9 4,6 5,15 Ø 2,2 ±0.05 Scale - 15:1 Scale - 5:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaC 001.000 2020-04-28 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-MMCX MMCX PCB SMT Jack Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 66011102111302 SIZE/TYPE BUSINESS UNIT STATUS PAGE Right Angle eiCan Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Material Properties: Mechanical Properties: Insulator Material PTFE Properties Value Unit Tol. Insulator Color White Center Contact Retention (Axial) 10 N min. Mating Cycle 500 Cycles Force to Engage 18 N max. Force to Disengage 6 N min. Center Contact Material Beryllium Copper Center Contact Plating Gold, min. 0.076µm over Nickel Body Material Brass Body Plating Gold, min. 0.076µm over Nickel Certification: Kind Properties: Interface IEC 61169-52 Connector Type Gender Orientation Type RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] MMCX Halogen Free Conform[IEC 61249-2-21] Jack Halogen Free Conform [JEDEC JS709B] Right Angle General Information: Operating Temperature -55 up to +155 °C Electrical Properties: Properties Test conditions Impedance Z Frequency Range f VSWR 1) Insertion Loss Insulation Resistance DC~6 GHz Unit 50 Ω Tol. DC~6 GHz DC~6 GHz IL Value DC~6 GHz RISO 500 V (DC) in 120 sec. 1.3 max. 0.25 dB 1000 MΩ max. min. 5 mΩ max. Contact Resistance Initial 2) R DC 0.2 V / 1 A Contact Resistance After Test 3) R DC 0.2 V / 1 A 15 mΩ max. Contact Resistance Initial 4) R DC 0.2 V / 1 A 2.5 mΩ max. Contact Resistance After Test 5) R DC 0.2 V / 1 A 7.5 mΩ max. 500 V (AC) in 60 sec. 500 Withstanding Voltage 1) 2) 3) 4) 5) V (RMS) min. VSWR in application varies decisively according to PCB layout. Center Contact Center Contact Outer Contact Outer Contact CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaC 001.000 2020-04-28 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-MMCX MMCX PCB SMT Jack Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 66011102111302 SIZE/TYPE BUSINESS UNIT STATUS PAGE Right Angle eiCan Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 E1 D0 T W3 A W B0 E2 B N D F W1 close to center C Top Cover Tape T1 D1 A A0 P1 detail B Carrier Tape Feeding direction End W2 T2 Start Cover Tape B Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is referred to the international standard IEC 60286-3:2019 A0 typ. 3,9 B0 typ. 7,3 W +0.3/-0.1 16,0 T max. 0,6 T1 max. 0,1 T2 max. 5,6 K0 typ. 5,0 P0 ±0.1 4,0 P1 ±0.1 8,0 P2 ±0.1 2,0 D0 +0.1/ -0 1,5 D1 min. 1,5 E1 ±0.1 1,75 E2 min. 14,25 F ±0.1 7,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 1500 165° - 180° Tolerance Value A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 16,40 W2 (mm) max. 22,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaC 001.000 2020-04-28 DIN ISO 2768-1m W3 (mm) min. 15,90 W3 (mm) max. 19,40 Material Polystyrene PROJECTION METHOD DESCRIPTION WR-MMCX MMCX PCB SMT Jack Pull-of force Tape width 16 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 66011102111302 SIZE/TYPE BUSINESS UNIT STATUS PAGE Right Angle eiCan Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Reel in Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 350 typ. 350 typ. 360 No. of reel outer packaging reel. 9 Packaging Unit pcs. 13500 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaC 001.000 2020-04-28 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-MMCX MMCX PCB SMT Jack Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 66011102111302 SIZE/TYPE BUSINESS UNIT STATUS PAGE Right Angle eiCan Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 1) 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. 1) refer to IPC/JEDEC J-STD-020D refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 1) 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³