662006235922

3 ±0.05 1.27 ±0.05 1 0.64 ±0.01 3 ±0.05 2 3.43 ±0.05 Recommended Land Pattern: [mm] 2.54 ±0.05 Dimensions: [mm] 5 9.9 ±0.15 3.1 ±0.15 0.7 ±0.2 L ±0.30 1± End O 2 .4 Pl ±0.20 2.16 ±0.05 pl ±0.1 2 3 ±0.05 1 11.4 ±0.2 6.86 ±0.15 0.5 ±0.15 2.16 ±0.15 0 .0 h 0.1 Max. Recommended PCB thickness : 1.6mm Scale - 2:1 Pattern Properties: 1.4 ±0.15 End Properties Value Unit 6 mm pl Pin to Pin (Middle) Scale - 2:1 Article Properties: Properties Value Polarity CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MPer 002.001 2025-02-03 DIN ISO 2768-1m PROJECTION METHOD Unit DESCRIPTION 6 Pin to Pin (Middle) Pl 6 mm Length L 12.7 mm Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-MPC3 Dual Row Male Header Vertical, GW, SMT ORDER CODE 662006235922 SIZE/TYPE BUSINESS UNIT STATUS PAGE with THT Retention Clips, Tin Plating, 6 Pins eiCan Valid 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Kind Properties: Properties Pitch P Durability Value Unit 3 mm 25 Mating cycles Material Properties: Insulator Material LCP Insulator Flammability Rating UL94 V-0 Insulator Color Black Pin Material Copper Alloy Pin Plating Tin over Nickel General Information: Operating Temperature -40 °C up to +105 °C Electrical Properties: Properties Rated Current Test conditions Working Voltage Withstanding Voltage Contact Resistance Insulation Resistance Value Unit 5 A 250 V (AC) IR 1 min Tol. 1500 V (AC) R 10 mΩ max. RISO 1000 MΩ min. Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] UL Approval E323964 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MPer 002.001 2025-02-03 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-MPC3 Dual Row Male Header Vertical, GW, SMT ORDER CODE 662006235922 SIZE/TYPE BUSINESS UNIT STATUS PAGE with THT Retention Clips, Tin Plating, 6 Pins eiCan Valid 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tray: [mm] Packaging Specification - Tray: [mm] W TRA A Tray B0 W1 TRA W2 TRA Cover Row Cavity detail A L1 L H TRA TRA TRA Embossment NB: Actual packaging may slightly differ from datasheet LTRA (mm) L1TRA (mm) WTRA (mm) W1TRA (mm) W2TRA (mm) B0 typ. 266 typ. 234 typ. 186 typ. 126 typ. 18 typ. 10.6 (mm) HTRA (mm) typ. 18.5 Packaging Unit pcs. 144 Material Plastic CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MPer 002.001 2025-02-03 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-MPC3 Dual Row Male Header Vertical, GW, SMT ORDER CODE 662006235922 SIZE/TYPE BUSINESS UNIT STATUS PAGE with THT Retention Clips, Tin Plating, 6 Pins eiCan Valid 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 400 typ. 280 typ. 300 No. of trays tra. 38 Outer Packaging Unit pcs. 5472 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MPer 002.001 2025-02-03 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-MPC3 Dual Row Male Header Vertical, GW, SMT ORDER CODE 662006235922 SIZE/TYPE BUSINESS UNIT STATUS PAGE with THT Retention Clips, Tin Plating, 6 Pins eiCan Valid 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³