665302124022

Dimensions: [mm] 0,2 ±0.05 1 1 ±0.05 0,7 ±0.1 L ±0.20 Cap h 0.1 Pl ±0.15 0,7 ±0.15 4,0 1 End 1,25 ±0.15 1,2 ±0.1 2,85 ±0.15 2,9 ±0.15 0,66 Cap Pattern Properties: Properties Value pl Pin to Pin (Middle) Article Properties: Properties 1 ±0.05 0,6 ±0.05 2 ±0.1 4,25 ±0.15 3,4 pl ±0.15 2,65 ±0.1 4,2 ±0.1 End Recommended Land Pattern: [mm] Value Pins Unit Unit 1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MPi 003.000 2022-12-09 DIN ISO 2768-1m Tol. mm ±0.15mm PROJECTION METHOD Tol. DESCRIPTION 2 Length L 4 mm Pin to Pin (Middle) Pl 1 mm ±0.15mm Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-WTB SMT Male Vertical Shrouded Header ORDER CODE 665302124022 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1.00 mm eiCan Valid 1/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Material Properties: Packaging Properties: Insulator Material LCP Insulator Flammability Rating Packaging Tape and Reel with Cap UL94 V-0 Contact Material Phosphor Bronze Contact Plating Tin Contact Type Stamped Kind Properties: Properties Pitch Value Unit 1 mm P General Information: Operating Temperature -25 up to +85 °C Electrical Properties: Properties Rated Current Value IR Working Voltage Insulation Resistance RISO Withstanding Voltage Contact Resistance R Unit 1 A 50 V (AC) 100 MΩ 500 V (AC) 20 mΩ Tol. min. max. Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] UL Approval E323964 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MPi 003.000 2022-12-09 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-WTB SMT Male Vertical Shrouded Header ORDER CODE 665302124022 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1.00 mm eiCan Valid 2/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³