687118188722

Dimensions: [mm] Recommended Land Pattern: [mm] pl ±0.05 1,2 ±0.05 0,5 ±0.05 2,6 ±0.05 End 1 1,2 ±0.20 0,5 ±0.15 L ±0.20 4,1 ±0.20 3,6 ±0.20 0,60 ±0.05 h 0.1 Pl ±0.10 2,45 0,75 ±0.15 L1 ±0.10 0,4 ±0.15 0,8 ±0.05 End 1 1,9 ±0.05 0,35 ±0.05 Pl 1,65 2,1 ±0.20 Pl 3,6 ±0.20 A B A-A 0,9 ±0.15 1,35 B-B A Recommended FFC Pattern Properties: B Properties Article Properties: Properties Value Pins Value Unit 8.5 mm pl Pin to Pin (Middle) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.003 2023-12-07 DIN ISO 2768-1m PROJECTION METHOD Unit DESCRIPTION 18 Pin to Pin (Middle) Pl 8.5 mm Length L 11 mm Length L1 9.5 mm Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-FPC SMT LIF Horizontal Dual Contact ORDER CODE 687118188722 SIZE/TYPE BUSINESS UNIT STATUS PAGE size/Type: 0.50mm eiCan Valid 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Kind Properties: Certification: Properties Pitch P Durability Value Unit Halogen Free Conform [IEC 61249-2-21] 0.5 mm UL Approval E323964 20 Mating cycles Packaging Properties: Material Properties: Insulator Material LCP Insulator Flammability Rating UL94 V-0 Insulator Color Copper Alloy Contact Plating Tin over Nickel Contact Type Stamped Solder Tabs Copper Alloy Solder Tabs Plating Value Packaging Tape and Reel Packaging Unit Ivory Contact Material Properties Qty. 3300 Specific Recommendation: In order to handle products correctly, please download our [precaution guide](www.we-online.com/precaution_6871xx188722) Tin over Nickel General Information: Operating Temperature -25 up to +85 °C Electrical Properties: Properties Rated Current Test conditions Value Unit 0.5 A 50 V (AC) IR Working Voltage Withstanding Voltage Contact Resistance Insulation Resistance 1 min Tol. 500 V (AC) R 20 mΩ max. RISO 50 MΩ min. Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.003 2023-12-07 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-FPC SMT LIF Horizontal Dual Contact ORDER CODE 687118188722 SIZE/TYPE BUSINESS UNIT STATUS PAGE size/Type: 0.50mm eiCan Valid 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 A K0 P2 E1 D0 W3 T A C W E2 N B F B0 D W1 close to center Top Cover Tape W2 T1 D1 A T2 A0 P1 detail B Carrier Tape Feeding direction End Start B Cover Tape Cover Tape Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is referred to the international standard IEC 60286-3:2019 A0 typ. 3.9 B0 typ. 11.3 W +0.3/-0.1 24 T max. 0.6 T1 max. 0.1 T2 max. 2.1 K0 typ. 1.5 P0 ±0.1 4 P1 ±0.1 12 P2 ±0.1 2,0 D0 +0.1/ -0 1.5 D1 min. 1,5 E1 min. 1.75 E2 min. 22.25 F ±0.1 11.5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 3300 165° - 180° Tolerance Value A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 100,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.003 2023-12-07 DIN ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-off force Tape width 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-FPC SMT LIF Horizontal Dual Contact ORDER CODE 687118188722 SIZE/TYPE BUSINESS UNIT STATUS PAGE size/Type: 0.50mm eiCan Valid 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Reel in Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 350 typ. 350 typ. 290 No. of reel outer packaging reel. 9 Packaging Unit pcs. 29700 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.003 2023-12-07 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-FPC SMT LIF Horizontal Dual Contact ORDER CODE 687118188722 SIZE/TYPE BUSINESS UNIT STATUS PAGE size/Type: 0.50mm eiCan Valid 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³