687314124422

Dimensions: [mm] Recommended Land Pattern: [mm] pl 0,4 1 0,8 2 End 0,2 ±0.05 End 1,3 2 1 4,3 1,5 3,4 ±0.15 0,5 0,5 ±0.15 3,50 L ±0.20 1 1 4,3 ±0.15 1,3 ±0.15 General tolerance ±0.05 Cap Pl Pl h 0.13 3,5 ±0.15 4,50 Cap 1,74 ±0.15 Pl ±0.15 Recommended FFC L1 ±0.10 Pattern Properties: Properties Pin to Pin (Middle) Article Properties: Properties Value Pins Value Unit 6.5 mm pl CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.004 2020-04-07 DIN ISO 2768-1m PROJECTION METHOD Unit DESCRIPTION 14 Pin to Pin (Middle) Pl 6.5 mm Length L 13.4 mm Length L1 7.6 mm WR-FPC SMT ZIF Vertical Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 687314124422 SIZE/TYPE BUSINESS UNIT STATUS PAGE Type A, 0.50 mm eiCan Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Kind Properties: Certification: Properties Pitch P Durability Value Unit REACh Approval 0.5 mm UL Approval 25 Mating cycles Conform or declared [(EC)1907/2006] E323964 Packaging Properties: Material Properties: Properties Insulator Material Insulator Flammability Rating UL94 V-0 Insulator Color Ivory Actuator Material PA9T Actuator Flammability Rating Packaging Unit Contact Material Phosphor Bronze Contact Plating 100 (µ") Tin over 50 (µ") Nickel Stamped Solder Tabs Brass Qty. 1000 In order to handle products correctly, please download our precaution guide which is available under “Tutorials” on our Homepage: www. we-online.com/precaution_6873xx124422 Black Contact Type Tape and Reel with Cap Specific Recommendation: UL94 V-0 Actuator Color Value Packaging LCP General Information: Operating Temperature -25 up to +85 °C Electrical Properties: Properties Rated Current Test conditions IR Tol. A 50 V (AC) 250 V (AC) R 20 mΩ max. RISO 100 MΩ min. Withstanding Voltage Insulation Resistance Unit 0.5 Working Voltage Contact Resistance Value 1 min Certification: RoHS Approval Compliant [2011/65/EU&2015/863] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.004 2020-04-07 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-FPC SMT ZIF Vertical Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 687314124422 SIZE/TYPE BUSINESS UNIT STATUS PAGE Type A, 0.50 mm eiCan Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 E1 D0 W3 T N A W B E2 B0 D F W1 close to center C Top Cover Tape T1 D1 A W2 T2 A0 P1 Feeding direction End Start detail B Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is reffered to the international standard IEC 60286-3:2013 A0 typ. 4,1 B0 typ. 12,3 W +0,3/-0,1 24,0 T max. 0,6 T1 max. 0,1 T2 max. 5,9 K0 typ. 5,3 P0 ±0,1 4,0 P1 ±0,1 12,0 P2 ±0,1 2,0 D0 +0,1/ -0,0 1,5 D1 min. 1,5 E1 ±0,1 1,75 E2 min. 22,25 F ±0,1 11,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 1000 165° - 180° A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 100,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.004 2020-04-07 DIN ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION WR-FPC SMT ZIF Vertical Pull-of force Tape width 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 687314124422 SIZE/TYPE BUSINESS UNIT STATUS PAGE Type A, 0.50 mm eiCan Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 365 typ. 365 typ. 220 No. of reel outer packaging reel. 7 Packaging Unit pcs. 7000 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE GM 001.004 2020-04-07 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-FPC SMT ZIF Vertical Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 687314124422 SIZE/TYPE BUSINESS UNIT STATUS PAGE Type A, 0.50 mm eiCan Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 1) 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. 1) refer to IPC/JEDEC J-STD-020D refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 1) 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³