Dimensions: [mm]
Recommended Land Pattern: [mm]
End
2
pl ±0,10
1,50 ±0,05
1
0,25 ±0.2
1,50 ±0,05
1,27 ±0.05
2,54 ±0.2
h 0,10
2,10 ±0.2
Pl ±0.10
5,75 ±0.2
5,25 ±0.2
3,0 ±0,10
5,30 ±0.2
Cap
5,50 ±0.2
L1 ±0.10
1,90 ±0.2
1
L ±0.30
End
2
1,27 ±0,05
2,54 ±0,05
5 ±0.3
4 ±0.2
7 ±0.3
5,2 ±0.3
Pattern Properties:
Properties
pl
Pin to Pin (Middle)
Value
Unit
21.59
mm
Cap
Article Properties:
Properties
Value
Pins
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ATo
002.000
2021-08-18
DIN ISO 2768-1m
PROJECTION
METHOD
Unit
DESCRIPTION
18
Pin to Pin (Middle)
Pl
21.59
mm
Length
L
24.86
mm
Length
L1
23.39
mm
WR-MM Female SMT Connector
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
690367281876
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
with Polarization
eiCan
Valid
1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Kind Properties:
Properties
Pitch
P
Test conditions
Value
Unit
per Row
2.54
mm
Durability
25 Mating cycles
Gender
Female
Material Properties:
Insulator Material
PA6T
Insulator Flammability Rating
UL94 V-0
Insulator Color
Red
Contact Material
Phosphor Bronze
Contact Plating
Matte Tin over Nickel
Contact Type
Stamped
General Information:
Operating Temperature
-40 up to +105 °C
Electrical Properties:
Properties
Rated Current
Test conditions
Value
IR
1.5
A
V (AC)
500
V (AC)
R
10
mΩ
max.
RISO
1000
MΩ
min.
Withstanding Voltage
Insulation Resistance
Tol.
250
Working Voltage
Contact Resistance
Unit
1 min
Certification:
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
cULus Approval
E323964
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ATo
002.000
2021-08-18
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WR-MM Female SMT Connector
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
690367281876
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
with Polarization
eiCan
Valid
2/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
Packaging Specification - Tape and Reel: [mm]
K0
P0
D0
P2
T
E
A
W3
A
N
D
S
B
W
B0
F
W1
close to center
C
Top Cover
Tape
D1
A
T1
P1
T2
A0
Carrier Tape
Feeding direction
End
Start
detail B
Cover Tape
Cover Tape
B
No Component
min. 160mm
Components
No Component
min. 100mm
Chip Cavity
Sprocket Hole
Embossment
Cover Tape
min. 400mm
NB: Actual packaging may slightly differ from datasheet
Packaging is referred to the international standard IEC 60286-3:2019
A0
typ.
7.4
B0
typ.
25.16
W
+0.3/-0.3
44
T
max.
1
T1
max.
0.1
T2
max.
7.1
K0
typ.
6.1
P0
±0.1
4
P1
±0.1
12
P2
±0.15
2,0
D0
+0.1/ -0
1.5
D1
min.
2,0
E
±0.1
1.75
S
±0.1
40.4
F
±0.1
20.2
Tape Type 3
Polystyrene
VPE / packaging unit
pcs.
800
165° -180°
Tolerance
Value
A
(mm)
± 2,0
330,00
B
(mm)
min.
1,50
C
(mm)
min.
12,80
D
(mm)
min.
20,20
N
(mm)
min.
100,00
W1
(mm)
+ 2,0
44,40
W2
(mm)
max.
50,40
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ATo
002.000
2021-08-18
DIN ISO 2768-1m
W3
(mm)
min.
43,90
W3
(mm)
max.
47,40
Material
Polysytrene
PROJECTION
METHOD
DESCRIPTION
WR-MM Female SMT Connector
Pull-of force
Tape width
44 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
690367281876
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
with Polarization
eiCan
Valid
3/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
H
C
Packaging Specification - Reel in Carton: [mm]
W
L
C
C
NB: Actual packaging may slightly differ from datasheet
LC (mm)
WC (mm)
HC (mm)
typ.
350
typ.
350
typ.
320
No. of reel
outer packaging
reel.
5
Packaging
Unit
pcs.
4000
Material
Paper
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ATo
002.000
2021-08-18
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WR-MM Female SMT Connector
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
690367281876
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
with Polarization
eiCan
Valid
4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
