690367282276

Dimensions: [mm] Recommended Land Pattern: [mm] End 2 pl ±0,10 1,50 ±0,05 1 0,25 ±0.2 1,50 ±0,05 1,27 ±0.05 2,54 ±0.2 h 0,10 2,10 ±0.2 Pl ±0.10 5,75 ±0.2 5,25 ±0.2 3,0 ±0,10 5,30 ±0.2 Cap 5,50 ±0.2 L1 ±0.10 1,90 ±0.2 1 L ±0.30 End 2 1,27 ±0,05 2,54 ±0,05 5 ±0.3 4 ±0.2 7 ±0.3 5,2 ±0.3 Pattern Properties: Properties pl Pin to Pin (Middle) Value Unit 26.67 mm Cap Article Properties: Properties Value Pins CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ATo 002.000 2021-08-18 DIN ISO 2768-1m PROJECTION METHOD Unit DESCRIPTION 22 Pin to Pin (Middle) Pl 26.67 mm Length L 29.94 mm Length L1 28.47 mm WR-MM Female SMT Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 690367282276 SIZE/TYPE BUSINESS UNIT STATUS PAGE with Polarization eiCan Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Kind Properties: Properties Pitch P Test conditions Value Unit per Row 2.54 mm Durability 25 Mating cycles Gender Female Material Properties: Insulator Material PA6T Insulator Flammability Rating UL94 V-0 Insulator Color Red Contact Material Phosphor Bronze Contact Plating Matte Tin over Nickel Contact Type Stamped General Information: Operating Temperature -40 up to +105 °C Electrical Properties: Properties Rated Current Test conditions Value IR 1.5 A V (AC) 500 V (AC) R 10 mΩ max. RISO 1000 MΩ min. Withstanding Voltage Insulation Resistance Tol. 250 Working Voltage Contact Resistance Unit 1 min Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] cULus Approval E323964 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ATo 002.000 2021-08-18 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-MM Female SMT Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 690367282276 SIZE/TYPE BUSINESS UNIT STATUS PAGE with Polarization eiCan Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] Packaging Specification - Tape and Reel: [mm] K0 P0 D0 P2 T E A W3 A N D S B W B0 F W1 close to center C Top Cover Tape D1 A T1 P1 T2 A0 Carrier Tape Feeding direction End Start detail B Cover Tape Cover Tape B No Component min. 160mm Components No Component min. 100mm Chip Cavity Sprocket Hole Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is referred to the international standard IEC 60286-3:2019 A0 typ. 7.4 B0 typ. 30.24 W +0.3/-0.3 44 T max. 1 T1 max. 0.1 T2 max. 7.1 K0 typ. 6.1 P0 ±0.1 4 P1 ±0.1 12 P2 ±0.15 2,0 D0 +0.1/ -0 1.5 D1 min. 2,0 E ±0.1 1.75 S ±0.1 40.4 F ±0.1 20.2 Tape Type 3 Polystyrene VPE / packaging unit pcs. 800 165° -180° Tolerance Value A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 100,00 W1 (mm) + 2,0 44,40 W2 (mm) max. 50,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ATo 002.000 2021-08-18 DIN ISO 2768-1m W3 (mm) min. 43,90 W3 (mm) max. 47,40 Material Polysytrene PROJECTION METHOD DESCRIPTION WR-MM Female SMT Connector Pull-of force Tape width 44 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 690367282276 SIZE/TYPE BUSINESS UNIT STATUS PAGE with Polarization eiCan Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Reel in Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 350 typ. 350 typ. 320 No. of reel outer packaging reel. 5 Packaging Unit pcs. 4000 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE ATo 002.000 2021-08-18 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-MM Female SMT Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 690367282276 SIZE/TYPE BUSINESS UNIT STATUS PAGE with Polarization eiCan Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³