693023010811

Recommended Land Pattern: [mm] 0,50 1,7 ±0.15 5,03 1,10 4,67 0,67 4,35 C8 C4 C7 C3 C6 C2 SW C5 C1 2 7,65 ±0.15 6,56 0,95 Dimensions: [mm] 13,3 ±0.15 12,1 12 0,65 ±0.15 1,27 ±0.15 0,41 ±0.05 0,85 +0.10 -0.03 0,37 ±0.15 1,1 ±0.15 +0.10 -0.03 h 0.10 Max 2,84 ±0.15 8,8 ±0.15 C5 C1 2,3 ±0.15 3 ±0.15 10,91 13,61 General tolerance ±0.05 14,1 ±0.15 C7 C3 C6 C2 SW 1,15 ±0.15 13,95 ±0.15 C4 C8 Article Properties: Pins CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 001.001 2020-08-04 DIN ISO 2768-1m PROJECTION METHOD 8 DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-COM Micro SIM Card Connector (Mega SIM) ORDER CODE 693023010811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 8 Pins eiCan Valid 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Card Detection Mechanism: Card detection switch Card removed Card inserted OPEN CLOSE CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 001.001 2020-08-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-COM Micro SIM Card Connector (Mega SIM) ORDER CODE 693023010811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 8 Pins eiCan Valid 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Pin Assignment: Electrical Properties: Pin Number Signal Name Description Properties 1 Vcc +5 VDC Rated Current 2 RESET RESET Working Voltage 3 CLK Clock Withstanding Voltage 4 RFU Reserved for Future Use Contact Resistance 1) R 5 GND Ground Insulation Resistance RISO 6 Vpp Programming Voltage 7 I/O Serial Data 8 RFU Reserved for Future Use SW Detection Card Detection Switch Kind Properties: Durability Gender Type 5 000 Mating cycles 1) Test conditions Value Unit 1 A 30 V (AC) 500 V (AC) 30 mΩ max. 1000 MΩ min. IR 1 min Tol. Pin Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [IEC 61249-2-21] Halogen Free Conform [JEDEC JS709B] Socket Push & Pull Material Properties: Insulator Material Insulator Flammability Rating Insulator Color LCP UL94 V-0 Black Contact Material Copper Alloy Contact Plating Selective Gold Contact Type Stamped Shielding Material Stainless Steel Shielding Plating Nickel General Information: Operating Temperature -25 up to +85 °C CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 001.001 2020-08-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-COM Micro SIM Card Connector (Mega SIM) ORDER CODE 693023010811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 8 Pins eiCan Valid 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 E1 D0 W3 T N A W B E2 B0 D F W1 close to center C Top Cover Tape T1 D1 A W2 T2 A0 P1 detail B End Start Feeding direction Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is referred to the international standard IEC 60286-3:2019 A0 typ. 14,66 B0 typ. 13,7 W +0.3/-0.1 24,0 T max. 0,6 T1 max. 0,1 T2 max. 3,0 K0 typ. 2,4 P0 ±0.1 4,0 P1 ±0.1 20,0 P2 ±0.1 2,0 D0 +0.1/ -0 1,5 D1 min. 1,5 E1 ±0.1 1,75 E2 min. 22,25 F ±0.1 11,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 1000 165° - 180° B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 001.001 2020-08-04 DIN ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width Tolerance Value A (mm) ± 2,0 330,00 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-COM Micro SIM Card Connector (Mega SIM) ORDER CODE 693023010811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 8 Pins eiCan Valid 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Outer Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 350 typ. 350 typ. 330 No. of reel outer packaging reel. 8 Packaging Unit pcs. 8000 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 001.001 2020-08-04 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-COM Micro SIM Card Connector (Mega SIM) ORDER CODE 693023010811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 8 Pins eiCan Valid 5/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³