693043020611

Dimensions: [mm] Recommended Land Pattern: [mm] 4,43 4,42 6,35 C7 C3 C2 C6 C1 C5 0,48 6,42 0,67 6x 0,65 0,6 1,27 1,30 3,18 0,35 ±0,2 3,18 ±0,2 12,14 1,27 ±0,2 9,86 ±0,2 0,34 4x 1,80 1,20 +0,15 0 +0,10 -0,15 6,35 ±0,2 r 0,10 9,56 ±0,2 C7 C3 C2 C6 C1C5 3,95 3,95 1,00 1,03 General tolerance ±0,05 12,50 ±0,2 Scale - 5:1 Scale - 3:1 Article Properties: Pins CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CLe 001.001 2020-01-20 DIN ISO 2768-1m PROJECTION METHOD 6 DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-CRD Nano SIM Card Connector ORDER CODE 693043020611 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - 6 Pins eiCan Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Pin Assignment: Electrical Properties: Pin Number Signal Name Description Properties Value Unit Tol. 1 Vcc +5 VDC Contact Resistance 1) R 100 mΩ max. 2 RESET RESET Insulation Resistance RISO 500 MΩ min. 3 CLOCK Clock 5 GND Ground 6 Vpp Programming Voltage 7 I/O Serial Data 1) Test conditions Pin Certification: Kind Properties: RoHS Approval Compliant [ 2011/65/EU&2015/863 ] REACh Approval Conform or declared [ (EC)1907/2006 ] Halogen Free Durability Conform [ IEC 61249-2-21 ] 1 500 Mating cycles Gender Socket Type Push & Pull Material Properties: Insulator Material LCP Insulator Flammability Rating UL94 V-0 Insulator Color Black Contact Material Copper Alloy Contact Plating Gold Flash Contact Type Stamped General Information: Operating Temperature -25 up to +85 °C Electrical Properties: Properties Rated Current Test conditions IR Working Voltage Withstanding Voltage 1 min Value Unit 1 A 15 V (AC) 500 V (AC) Tol. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CLe 001.001 2020-01-20 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-CRD Nano SIM Card Connector ORDER CODE 693043020611 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - 6 Pins eiCan Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: P0 K0 P2 E1 D0 A T W3 A W B0 E2 B N D F W1 close to center C Top Cover Tape T1 D1 A T2 A0 W2 P1 End Start Feeding direction detail B Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is referred to the international standard IEC 60286-3:2013 A0 typ. 10,85 B0 typ. 15,33 W +0.3/-0.1 24,00 T max. 0,60 T1 max. 0,10 T2 max. 2,80 K0 typ. 2,20 P0 ±0.1 4,00 P1 ±0.1 16,00 P2 ±0.1 2,00 D0 +0.1/ -0 1,50 D1 min. 1,50 E1 ±0.1 1,75 E2 min. 22,25 F ±0.1 11,50 Tape Type 2a Polystyrene VPE / packaging unit pcs. 1500 165° - 180° B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CLe 001.001 2020-01-20 DIN ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width Tolerance Value A (mm) ± 2,0 330,00 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-CRD Nano SIM Card Connector ORDER CODE 693043020611 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - 6 Pins eiCan Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Reel in Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 350 typ. 350 typ. 400 No. of reel outer packaging reel. 13 Packaging Unit pcs. 19500 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE CLe 001.001 2020-01-20 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-CRD Nano SIM Card Connector ORDER CODE 693043020611 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - 6 Pins eiCan Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 1) 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp see table Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TL to TP) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. 1) refer to IPC/JEDEC J-STD-020D refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature: Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 1) 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³