693063010911

Dimensions: [mm] Recommended Land Pattern: [mm] O 1,63 1,3 1,2 1,1 17,5 9,38 0,7 ±0.10 ±0 .1 1 ±0.10 10 11 2,5 O 6 1, .1 ±0 9 0,75 21,5 2,4 2,8 23,50 2,8 21 25,9 ±0.2 24,5 1,8 r 0.12 1,5 ±0.05 1,3 ±0.2 1 ±0.05 11,5 1,2 « via » limited area 5 ±0.2 2,25 1,55 1,35 22,7 1 2 0,5 24,16 3 0,5 17,5 4,7 1,5 2 1,63 4 21 1,5 1,3 ±0.1 0,55 ±0.05 3,20 2,5 9,375 2,75 ±0.25 1,2 ±0.1 6 5 11,5 8 7 1,5 14,4 28,8 87 6 5 4 3 2 1 9 General tolerances : ±0.05 2 25,5 22 Scale - 2:1 26,6 28 Scale - 1,5:1 Article Properties: Pins CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.001 2022-11-22 DIN ISO 2768-1m PROJECTION METHOD 9 DESCRIPTION WR-CRD SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693063010911 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 9 Pins eiCan Valid 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Card Detection Mechanism: Card Position: Card detection switch Card inserted OPEN CLOSE Write Protect Write enable OPEN CLOSE 10,5 Card removed Write protection switch CARD WORKING CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.001 2022-11-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-CRD SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693063010911 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 9 Pins eiCan Valid 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Kind Properties: Certification: Durability 10 000 Mating cycles Application Halogen Free Conform [IEC 61249-2-21] SD Gender Socket Type Push & Pull Material Properties: Insulator Material LCP Insulator Flammability Rating UL94 V-0 Insulator Color Black Contact Material Copper Alloy Contact Plating Selective Gold Contact Type Stamped Shielding Material Copper Alloy Shielding Plating Nickel (Ni) General Information: Operating Temperature -25 up to +85 °C Electrical Properties: Properties Rated Current Test conditions IR Working Voltage Withstanding Voltage 1 min Value Unit 0.5 A 100 V (AC) 500 V (AC) Tol. Contact Resistance 1) R 100 mΩ max. Insulation Resistance RISO 1000 MΩ min. 1) Pin Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.001 2022-11-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-CRD SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693063010911 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 9 Pins eiCan Valid 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] K0 P0 P2 T W3 W1 close to center A W S B0 B N D F D0 E A C Top Cover Tape D1 A T1 P1 W2 T2 A0 End Carrier Tape Cover Tape Start Feeding direction detail B Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is referred to the international standard IEC 60286-3:2019 A0 typ. 29,0 B0 typ. 27,5 W +0.3/-0.3 44,0 T max. 1,0 T1 max. 0,1 T2 max. 5,5 K0 typ. 4,5 P0 ±0.1 4,0 P1 ±0.1 32,0 P2 ±0.15 2,0 D0 +0.1/ -0 1,5 D1 min. 2,0 E ±0.1 1,75 S ±0.1 40,4 F ±0.1 20,2 Tape Type 3 Polystyrene VPE / packaging unit pcs. 450 165° -180° A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 80,00 W1 (mm) + 2,0 44,40 W2 (mm) max. 50,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.001 2022-11-22 DIN ISO 2768-1m W3 (mm) min. 43,90 W3 (mm) max. 47,40 Material Polysytrene PROJECTION METHOD DESCRIPTION WR-CRD SD Card Connector Pull-off force Tape width 44 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693063010911 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 9 Pins eiCan Valid 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 355 typ. 355 typ. 330 No. of reel outer packaging reel. 6 Packaging Unit pcs. 2700 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.001 2022-11-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-CRD SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693063010911 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Pull - with Card Detection - 9 Pins eiCan Valid 5/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³