693071020811

Dimensions: [mm] Recommended Land Pattern: [mm] 16,2 ±0.20 8 ±0.20 8,8 3,05 ±0.08 6,55 1,1 1,9 0,7 1,7 10 0,4 11 9 1,8 1 9,6 0,9 1,7 0,53 ±0.20 12 13 0,9 15,65 ±0.20 8,8 ±0.20 6,55 0,30 O 0,4 Ø 0,8 ±0.05 7,15 0 .1 +0 0 1,4 +0.10 0 0,10 r 0.10 7,4 Connector center line 2,6 14,6 ±0.20 2,48 ±0.20 0,10 11,25 ±0.20 1,85 ±0.20 1 7,45 9 0,90 1,85 ±0.20 8,1 3,05 1,10 8 Connector center line General tolerance ± 0.05 Scale - 4:1 14,5 ±0.20 1,8 1,15 9,55 ±0.20 1,05 13,8 ±0.20 14,3 14,7 ±0.20 Scale - 2,5:1 Article Properties: Pins CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.000 2022-09-27 DIN ISO 2768-1m PROJECTION METHOD 8 DESCRIPTION WR-CRD Micro SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693071020811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Push - with Card Detection - 8 Pins eiCan Valid 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 1,65 Card Position: 5,6 2,5 Card Detection Mechanism: CARD PUSH OUT CARD PUSH IN CARD WORKING CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.000 2022-09-27 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-CRD Micro SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693071020811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Push - with Card Detection - 8 Pins eiCan Valid 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Pin Assignment: Electrical Properties: Pin Number Signal Name Description Properties 1 DAT2 Data Line 2 Rated Current 2 CD/DAT3 Card Detection / Data Line 3 Working Voltage 3 CMD Command / Answer Withstanding Voltage 4 Vdd Power Supply Contact Resistance 1) R 5 CLK Clock Contact Resistance 2) Insulation Resistance 6 Vss Ground 7 DAT0 Data Line 0 8 DAT1 Data Line 1 9 CD SW1 Card Detection Switch 1 10 (& above) GND Ground Kind Properties: Durability Gender Type 1) 2) Test conditions Value Unit 0.5 A 30 V (AC) 500 V (AC) 100 mΩ max. R 500 mΩ max. RISO 100 MΩ min. IR 1 min Tol. Pin Switch Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] 10 000 Mating cycles Socket Push & Push Material Properties: Insulator Material Insulator Flammability Rating Insulator Color LCP UL94 V-0 Black Contact Material Copper Alloy Contact Plating Selective Gold Contact Type Stamped General Information: Operating Temperature -40 up to +85 °C CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.000 2022-09-27 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-CRD Micro SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693071020811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Push - with Card Detection - 8 Pins eiCan Valid 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 E1 D0 T W3 A W B0 E2 B N D F W1 close to center C Top Cover Tape T1 D1 A W2 T2 A0 P1 detail B End Start Feeding direction Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is reffered to the international standard IEC 60286-3:2013 A0 typ. 16,9 B0 typ. 16,55 W +0,3/-0,1 24 T max. 0,6 T1 max. 0,1 T2 max. 3,5 K0 typ. 2,9 P0 ±0,1 4 P1 ±0,1 20 P2 ±0,1 2,0 D0 +0,1/ -0,0 1,5 D1 min. 1,5 E1 ±0,1 1,75 E2 min. 22,25 F ±0,1 11,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 900 165° - 180° A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 60,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.000 2022-09-27 DIN ISO 2768-1m W3 (mm) min. 23,90 W3 (mm) max. 27,40 Material Polystyrene PROJECTION METHOD DESCRIPTION WR-CRD Micro SD Card Connector Pull-off force Tape width 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693071020811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Push - with Card Detection - 8 Pins eiCan Valid 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Carton: [mm] NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 340 typ. 340 typ. 255 No. of reel outer packaging reel. 7 Packaging Unit pcs. 6300 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE BBo 002.000 2022-09-27 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WR-CRD Micro SD Card Connector Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 693071020811 SIZE/TYPE BUSINESS UNIT STATUS PAGE Push & Push - with Card Detection - 8 Pins eiCan Valid 5/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³