Dimensions: [mm]
Recommended Land Pattern: [mm]
3,5
pl
1
2
3
3
4,6 ±0,3
1,2 ±0,1
L
2
14
1
2
6
4 ±0,1
13,1
11,7 ±0,2
1,4 ±0,3
Pl
Article Properties:
Properties
Value
Pins
Length
The value Pl does not apply for this part number.
4
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
JuHe
001.005
2022-06-28
DIN ISO 2768-1m
PROJECTION
METHOD
Unit
DESCRIPTION
1
L
CHECKED
mm
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-LECO Series 4.00 mm - SMT
Horizontal Entry Connector
ORDER CODE
695401400222
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
4.00 mm
eiCan
Valid
1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Kind Properties:
Certification:
Properties
Pitch
P
Value
Unit
Halogen Free
4
mm
cULus Approval
Conform [JEDEC JS709B]
E323964
Material Properties:
Insulator Material
PA 9T
Insulator Flammability Rating
UL94 V-0
Insulator Color
Grey
Contact Material
Copper Alloy
Contact Plating
Tin over Nickel
General Information:
Operating Temperature
-35 up to +105 °C
Electrical Properties:
Properties
Rated Current
Test conditions
Value
IR
Working Voltage
Withstanding Voltage
Contact Resistance
1 min
R
Unit
9
A
250
V (AC)
1500
V (AC)
20
mΩ
Tol.
max.
Wire Properties:
Solid Wire Section (AWG)
Solid Wire Section (Metric)
Wire Strip Length
18 to 24 (AWG)
0.2 to 0.75 (mm²)
8 up to 9 (mm)
Certification:
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [IEC 61249-2-21]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
JuHe
001.005
2022-06-28
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-LECO Series 4.00 mm - SMT
Horizontal Entry Connector
ORDER CODE
695401400222
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
4.00 mm
eiCan
Valid
2/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
Packaging Specification - Reel: [mm]
P0
A
K0
P2
E1
D0
T
W3
A
W
B0
E2
B
N
D
F
W1
close to center
C
Top Cover
Tape
T1
D1
A
W2
T2
A0
P1
Feeding direction
End
Start
detail B
Carrier Tape
Cover Tape
Cover Tape
B
Chip Cavity
Sprocket Hole
No Component
min. 160mm
Component
No Component
min. 100mm
Embossment
Cover Tape
min. 400mm
NB: Actual packaging may slightly differ from datasheet
Packaging is reffered to the international standard IEC 60286-3:2013
A0
typ.
4,0
B0
typ.
16,0
W
+0,3/-0,1
24,0
T
max.
0,6
T1
max.
0,1
T2
max.
5,9
K0
typ.
5,3
P0
±0,1
4,0
P1
±0,1
8,0
P2
±0,1
2,0
D0
+0,1/ -0,0
1,5
D1
min.
1,5
E1
±0,1
1,75
E2
min.
22,0
F
±0,1
11,5
Tape Type 2a
Polystyrene
VPE / packaging unit
pcs.
1300
165° - 180°
B
(mm)
min.
1,50
C
(mm)
min.
12,80
D
(mm)
min.
20,20
N
(mm)
± 2,0
60,00
W1
(mm)
+ 2,0
24,40
W2
(mm)
max.
30,40
W3
(mm)
min.
23,90
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
JuHe
001.005
2022-06-28
DIN ISO 2768-1m
W3
(mm)
max.
27,40
Material
Polystyrene/ Polyurethane
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
A
(mm)
± 2,0
330,00
24 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-LECO Series 4.00 mm - SMT
Horizontal Entry Connector
ORDER CODE
695401400222
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
4.00 mm
eiCan
Valid
3/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
H
C
Packaging Specification - Carton: [mm]
W
L
C
C
NB: Actual packaging may slightly differ from datasheet
LC (mm)
WC (mm)
HC (mm)
typ.
340
typ.
340
typ.
400
No. of reel
outer packaging
reel.
10
Packaging
Unit
pcs.
6500
Material
Paper
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
JuHe
001.005
2022-06-28
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WR-LECO Series 4.00 mm - SMT
Horizontal Entry Connector
ORDER CODE
695401400222
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
4.00 mm
eiCan
Valid
4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
