695403151122

Recommended Land Pattern: [mm] 1,40 ±0,10 l1 ±0,05 pl ±0,05 1,50 ±0,05 O 70 0, 0,80 ±0,10 5 ,0 ±0 End 1 1,95 ±0,10 Dimensions: [mm] 2,45 ±0,10 1,500 ±0,10 1,90 ±0,10 0,40 L ±0,20 0,85 ±0,05 1 End h 0,10 Pl ±0,10 Ø 0,60 ±0,05 L1 ±0,05 7,10 ±0,20 7,90 ±0,20 9,00 ±0,20 1,30 ±0,10 Pattern Properties: Properties Value Unit Pin to Pin (Middle) pl 3 mm Length l1 6.5 mm Article Properties: Properties Value Pins 1,10 ±0,10 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JHe 001.004 2021-06-08 DIN ISO 2768-1m PROJECTION METHOD Unit DESCRIPTION 3 Pin to Pin (Middle) Pl 3 mm Length L 8.3 mm Length L1 6.5 mm Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-LECO SMT Angled Receptacle Connection ORDER CODE 695403151122 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1.50 mm eiCan Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Kind Properties: Certification: Properties Pitch P Durability Value Unit 1.5 mm 10 Mating cycles UL Approval E323964 Packaging Properties: Packaging Material Properties: Tape and Reel Packaging Unit Insulator Material PA6T Insulator Flammability Rating In order to handle products correctly, please download our precaution guide which is available under “Tutorials” on our Homepage: www. we-online.com/precaution_wr-leco UL94 V-0 Insulator Color 1100 White Contact Material Phosphor Bronze Contact Plating Matte Tin over Nickel Contact Type Stamped Solder Tabs Brass Solder Tabs Plating Matte Tin over Nickel General Information: Operating Temperature -25 up to +85 °C Electrical Properties: Properties Rated Current Test conditions Working Voltage Withstanding Voltage Contact Resistance Insulation Resistance Value Unit Tol. 1 A max. 150 V (AC) IR 1300 V (AC) R 1 min 20 mΩ max. RISO 1000 MΩ min. Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [IEC 61249-2-21] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JHe 001.004 2021-06-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-LECO SMT Angled Receptacle Connection ORDER CODE 695403151122 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1.50 mm eiCan Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 A K0 P2 E1 D0 W3 T N C W E2 A B F B0 D W1 close to center Top Cover Tape W2 T1 D1 A T2 A0 P1 detail B Feeding direction End Start Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components Embossment No Component min. 100mm Cover Tape min. 400mm NB: Actual packaging may slightly differ from datasheet Packaging is reffered to the international standard IEC 60286-3:2013 A0 typ. 9,3 B0 typ. 9,0 W +0,3/-0,1 24,0 T max. 0,6 T1 max. 0,1 T2 max. 4,1 K0 typ. 3,5 P0 ±0,1 4,0 P1 ±0,1 16,0 P2 ±0,1 2,0 D0 +0,1/ -0,0 1,5 D1 min. 1,5 E1 ±0,1 1,75 E2 min. 22,25 F ±0,1 11,5 Tape Type 2a Polystyrene VPE / packaging unit pcs. 1100 165° - 180° B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) ± 2,0 60,00 W1 (mm) + 2,0 24,40 W2 (mm) max. 30,40 W3 (mm) min. 23,90 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JHe 001.004 2021-06-08 DIN ISO 2768-1m W3 (mm) max. 27,40 Material Polystyrene/ Polyurethane PROJECTION METHOD DESCRIPTION Pull-of force Tape width A (mm) ± 2,0 330,00 24 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-LECO SMT Angled Receptacle Connection ORDER CODE 695403151122 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1.50 mm eiCan Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. H C Packaging Specification - Carton: [mm] W L C C NB: Actual packaging may slightly differ from datasheet LC (mm) WC (mm) HC (mm) typ. 350 typ. 350 typ. 300 No. of reel outer packaging reel. 9 Packaging Unit pcs. 9900 Material Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JHe 001.004 2021-06-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WR-LECO SMT Angled Receptacle Connection ORDER CODE 695403151122 SIZE/TYPE BUSINESS UNIT STATUS PAGE 1.50 mm eiCan Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³