74269241102

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Impedance @ 100 MHz W 0,5 0,6 Impedance @ 1 GHz 0,25 ±0,1 Test conditions Value Unit Tol. Z 100 MHz 1000 Ω ±25% Z 1000 MHz 216 Ω typ. Maximum Impedance Zmax 129 MHz 1157 Ω typ. Rated Current 2 IR 2 ΔT = 40K 480 mA max. DC Resistance RDC @ 20 °C 0.48 Ω max. DC Resistance RDC @ 20 °C 0.43 Ω typ. Type WIDE BAND / HIGH SPEED: W = 1,5 HIGH CURRENT: W = 2,2 0,5 ±0,05 1,0 ±0,05 Wide Band Certification: Scale 20:1 RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Schematic: General Information: 0,5 ±0,05 Do not use this part beyond the Rated Current as this will create excessive heat and can harm the component Operating Temperature -55 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Scale 20:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MHB 001.001 2019-03-20 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-TMSB SMT EMI Suppression Ferrite Bead ORDER CODE 74269241102 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0402 eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Impedance Characteristics: DC bias current: 10000 10000 1000 Impedance [Ω] Impedance [Ω] 1000 100 100 10 10 1 1 10 100 1000 1 1 10 100 Frequency [MHz] Z XL Frequency [MHz] 1000 R Z @ 100mA Z @ 400mA Z @ 150mA Z @ 500mA CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MHB 001.001 2019-03-20 DIN ISO 2768-1m Z @ 250mA PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-TMSB SMT EMI Suppression Ferrite Bead ORDER CODE 74269241102 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0402 eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A P2 W3 T (=K0) E1 D0 W1 close to center D A B0 E2 C top cover tape A0 N W F B T1 A P1 Feeding direction End W2 T1 Carrier Tape Start Cover Tape detail B B Top Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min. 100mm Embossment Bottom Cover Tape Cover Tape min. 400mm tolerance size A0 typ. 0,69 B0 typ. 1,19 W +0,3/ -0,1 8,00 P1 ±0,1 2,00 T max. 0,66 T1 max. 0,10 D0 +0,1/ -0,0 1,50 E1 ±0,1 1,75 E2 min. 6,25 F ±0,05 3,50 P0 ±0,1 4,00 P2 ±0,05 2,00 packaging unit pcs. 10000 165° - 180° tolerance Tape width 8 mm A ±2,0 178.00 B min. 1.50 C ±0,8 13.00 D min. 20.20 N min. 50.00 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MHB 001.001 2019-03-20 DIN ISO 2768-1m W1 +1,5 8.40 W2 max. 14.40 W3 min. 7.90 W3 max. 10.90 PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-TMSB SMT EMI Suppression Ferrite Bead ORDER CODE 74269241102 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0402 eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Middle Carton: [mm] H C H IC Packaging Specification - Inner Carton: [mm] W L IC Tolerance Value LIC (mm) typ. 185,00 WIC (mm) typ. 185,00 HIC (mm) typ. 80,00 No. of Reel (pcs.) 5 Qty. (pcs.) 50000 W IC L C Material Paper Tolerance Value LC (mm) typ. 445,00 WC (mm) typ. 395,00 HC (mm) typ. 210,00 C No. of Inner Carton (pcs.) Qty. (pcs.) Material 10 500000 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE MHB 001.001 2019-03-20 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-TMSB SMT EMI Suppression Ferrite Bead ORDER CODE 74269241102 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0402 eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³