7427520

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 3 7,0 ref. 1,0 ref. 2 1 1 2 4 0,6 ref. 2,0 ref. 4,8 ±0,3 1,25 ref. 2,5 ±0,2 Properties 3 4 1,5 ±0,5 Unit Tol. Z 25 MHz 20 Ω ±25% Impedance @ 100 MHz 2) Z 100 MHz 30 Ω ±25% Impedance @ 25 MHz 2 turns Z 25 MHz 75 Ω typ. Impedance @ 100 MHz 2 turns Z 100 MHz 115 Ω typ. Rated Current 1 3) IR 1 ΔT = 40 K 17 A max. Rated Current 2 4) IR 2 ΔT = 40 K 34 A typ. DC Resistance RDC @ 20 °C 3 mΩ max. Rated Voltage VR 80 V (DC) 1) 2) 3) 4) 2,5 ±0,3 3,2 max. 4,5 ±0,2 Value Impedance @ 25 MHz 1) Scale -3:1 Schematic: Test conditions Common Mode Common Mode Differential Mode Common Mode Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] 5,6 ±0,4 Component Qualification 1 4 2 3 AEC-Q200 Grade 1 General Information: Do not use this part constantly beyond the Rated Current, as this will create excessive heat and can harm the component Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Scale -4:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE THa 002.001 2021-11-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-CMS SMT Bead Array Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 7427520 SIZE/TYPE BUSINESS UNIT STATUS PAGE 4856 eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Typical Impedance Characteristics: 1000 Common Mode Impedance [Ω] 100 Differential Mode 10 2 turns 1 1 10 Z (comm) 100 Frequency [MHz] Z (diff) 1000 Z (2 turn) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE THa 002.001 2021-11-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-CMS SMT Bead Array Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 7427520 SIZE/TYPE BUSINESS UNIT STATUS PAGE 4856 eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Derating Curve: 120% 100% Current [A] 80% 60% 40% 20% 0% 0 20 40 60 80 100 120 140 160 Temperature [°C] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE THa 002.001 2021-11-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-CMS SMT Bead Array Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 7427520 SIZE/TYPE BUSINESS UNIT STATUS PAGE 4856 eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] tolerance Tape width P0 A B min. 1,50 C ±0,8 13,00 D min. 20,20 N min. 100,00 W1 +1,5 12,40 W2 max. 18,40 W3 min. 11,90 W3 max. 15,40 K0 P2 T B0 W E2 F E1 D0 12 mm A ±2,0 330,00 Top Cover Tape A P1 D1 T1 A0 T2 End Start Feeding direction Carrier Tape Cover Tape No Component min.160mm Components No Component min.100mm Cover Tape min. 400mm packaging is reffered to the international standard IEC 60286-3:2013 tolerance size 7427520 A0 typ. 6,00 B0 typ. 5,10 W +0,3 -0,1 12,00 P1 ±0,1 8,00 T ±0,1 0,30 T1 max. 0,10 T2 typ. 3,60 D0 +0,1 -0,0 1,50 E1 ±0,1 1,75 E2 min. 10,25 F ±0,05 5,50 P0 ±0,1 4,00 P2 ±0,05 2,00 Tape Type Polystyrene VPE / packaging unit pcs. 2000 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE THa 002.001 2021-11-15 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION WE-CMS SMT Bead Array Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com ORDER CODE 7427520 SIZE/TYPE BUSINESS UNIT STATUS PAGE 4856 eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³