744220

Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 744220 LF STROMKOMP. SMD LINE FILTER WE-SL2 COMMON MODE SMD LINE FILTER WE-SL2 DATUM / DATE : 2004-10-11 A Mechanische Abmessungen / dimensions: H 3 4 G C B D F A WE 2 3 ===== 1 4 2 Ee 1 A B C D E F G H 9,2 ± 0,3 6,0 ± 0,3 5,0 ± 0,2 2,0 ref. 2,54 ± 0,2 5,7 ref. 1,4 ref. 1,0 ± 0,1 mm mm mm mm mm mm mm @@FRM 1@@ B Elektrische Eigenschaften / electrical properties: Eigenschaften / properties Induktivität / inductance Nennspannung/ rated voltage DC-Widerstand / DC-resistance Nennstrom / rated current Impedanz / impedance Testbedingungen / test conditions 5 mV / 100 KHz Wert / value Einheit / unit tol. ± 50 % C Lötpad / soldering spec.: µH V Ω A Ω max. max. max. 2,0 9,5 L1-4;2-3 UDC RDC IDC Z 4.700 80 0,75 0,50 20000 2,54 1,2 1,2 D Prüfgeräte / test equipment: HP 4274 A für/for L und/and Q HP 34401 A für/for IDC und/and RDC E Testbedingungen / test conditions: Luftfeuchtigkeit / humidity: Umgebungstemperatur / temperature: 33% +20° C F Werkstoffe & Zulassungen / material & approvals Basismaterial / base material: Draht / wire: Gehäuse / Housing: Ferrit / ferrite Class F UL94-V0 G Eigenschaften / granted properties: Betriebstemp. / operating temperature: -40° - + 125° C C Umgebungstemp. / ambient temperature: -40° - + 85° C C It is recommended that the temperature of the part does not exceed 125° under worst case operating conditions. C Spannungsfestigkeit / High-Pot Test:(60Hz 3mA 3sec.) 500 VAC Freigabe erteilt / general release: Kunde / customer .................................................................................. ..................................................................................BKO Version 5 Version 4 Version 3 Version 2 Version 1 Änderung / modification 2008-04-29 2004-10-11 2004-03-29 2003-04-15 2002-04-17 Datum / date Unterschrift / signature Würth Elektronik MST MST AG .................................................................................. ..................................................................................MST Geprüft / checked Kontrolliert / approved Name Datum / date Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 1 VON 2 Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 744220 LF STROMKOMP. SMD LINE FILTER WE-SL2 COMMON MODE SMD LINE FILTER WE-SL2 DATUM / DATE : 2004-10-11 H Impedanzverlauf / impedance curve: 100000 10000 Impedanz / impedance [Ohm] 1000 100 10 1 0,01 IF BW 10kHz START 1 MHz 0,1 Frequenz / frequency [MHz] POWER 0 dBm 1 10 SWP 134,5 msec STOP 10 MHz Z (com) common mode differential mode ===== ===== Freigabe erteilt / general release: Kunde / customer .................................................................................. ..................................................................................BKO Version 5 Version 4 Version 3 Version 2 Version 1 Änderung / modification 08-04-29 04-10-11 2004-03-29 2003-04-15 2002-04-17 Datum / date Unterschrift / signature Würth Elektronik MST MST AG .................................................................................. ..................................................................................MST Geprüft / checked Kontrolliert / approved Name Datum / date This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 2 VON 2