Dimensions: [mm]
Recommended Land Pattern: [mm]
Electrical Properties:
3
1
2
1
0,3
2
0,35 ±0,1
4
3
0,6
0,9 ±0,2
L
Impedance @ 100 MHz
Z
Rated Current
IR
DC Resistance
RDC
fc
Value
Unit
100
nH
typ.
100 MHz
60
Ω
±25%
ΔT = 20 K
600
mA
max.
220
mΩ
max.
10
GHz
typ.
max.
|Sdd21| = 3 dB
Insulation Test Voltage
VT
125
V (AC)
Rated Voltage
VR
20
V
Tol.
Certification:
1,5
1,2 ±0,2
Test conditions
Inductance
Cut-Off Frequency
1,2
4
0,35 ±0,1
Properties
Scale - 15:1
Schematic:
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
Component Qualification
AEC-Q200 Grade2
AECQ Qualified
Yes
1,0 ±0,2
General Properties:
1
4
3
2
1
2
Ambient Temperature (referring
to IR)
-40 up to +85 °C
Operating Temperature
-40 up to +105 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Moisture Sensitivity Level (MSL)
1
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently
Scale - 15:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ACG
002.003
2021-02-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-CNSW HF SMT Common Mode
Line Filter
ORDER CODE
7442335600
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
0504
eiSos
Valid
1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Typical Impedance Characteristics:
Typical Differential Mode Insertion Loss Characteristics:
1000
Frequency [MHz]
1
10
100
1000
10000
0
Differential Mode Insertion Loss [dB]
-1
Impedance [Ω]
100
10
-2
-3
-4
-5
-6
-7
-8
1
1
10
100
1000
Frequency [MHz]
Z (comm)
-9
-10
Z (diff)
Sdd21
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ACG
002.003
2021-02-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-CNSW HF SMT Common Mode
Line Filter
ORDER CODE
7442335600
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
0504
eiSos
Valid
2/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Typical Common Mode Insertion Loss Characteristics:
Test Setup:
Frequency [MHz]
1
10
100
1000
10000
0
-1
According to CISPR 17
Common Mode Insertion Loss [dB]
-2
-3
1´ (GND)
-4
Port 1
1
-5
2´ (GND)
1
4
Port 2
2
3
4
DUT
3
-6
2
Port 3
-7
Port 4
3´ (GND)
4´ (GND)
-8
GND
-9
Network Analyzer: Keysight E5080A or equivalent
-10
-11
-12
Scc21
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ACG
002.003
2021-02-10
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-CNSW HF SMT Common Mode
Line Filter
ORDER CODE
7442335600
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
0504
eiSos
Valid
3/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
Packaging Specification - Reel: [mm]
P0
P2
T
W3
E1
D0
W1
close to center
A
E2
B0
C
top cover
tape
D1
A0
K0
P1
W2
T1
T2
Feeding direction
End
N
W
F
D
B
Start
Carrier tape
detail B
B
Cover tape
Top
Cover Tape
Chip Cavity
Sprocket Hole
No Component
min. 160 mm
Components
No Component
min. 100 mm
Cover Tape
min. 400 mm
Embossment
Packaging is referred to the international standard IEC 60286-3:2013
tolerance
value
A0
±0,1
1,12
B0
±0,1
1,4
W
±0,1
8,00
T
±0,05
0,22
T1
max.
0,10
T2
typ.
0,98
K0
typ.
0,78
P0
±0,1
4,00
P1
±0,1
4,00
P2
±0,05
2,00
D0
+0,1/ -0,0
1,50
D1
min.
0,30
E1
±0,1
1,75
E2
min.
6,25
F
±0,05
3,50
Tape type 2a
Polystyrene
Packaging unit
pcs.
3000
165° - 180°
tolerance
Tape width
8 mm
A
± 2,0
178
B
min.
1.5
Bottom
Cover Tape
C
min.
12.8
D
min.
20.2
N
min.
50
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ACG
002.003
2021-02-10
DIN ISO 2768-1m
W1
+1,5
8.4
W2
max.
14.4
W3
min.
7.9
W3
max.
10.9
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
8 mm
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-CNSW HF SMT Common Mode
Line Filter
ORDER CODE
7442335600
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
0504
eiSos
Valid
4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
Ts min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
Liquidous Temperature
tL
Preheat Area
TC –5°C
Value
Preheat Temperature Min
60 - 120 seconds
3 °C/ second max.
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
