Dimensions: [mm]
Recommended Land Pattern: [mm]
Electrical Properties:
Properties
Test conditions
Value
Unit
Tol.
L
100 kHz/ 10 mA
0.47
µH
±20%
IR
ΔT = 50 K
23
A
max.
IRP,40K
ΔT = 40 K
Inductance
RDC is measured at these points.
3,9 u0,5
Rated Current
2,0 ±0,2
3,5 ±0,2
5,4
Performance Rated Current
7,0
7,8 ref.
2,9
1)
40.2
A
max.
Saturation Current @ 10%
ISAT,10% |ΔL/L| < 10 %
44.4
A
typ.
Saturation Current @ 30%
ISAT,30% |ΔL/L| < 30 %
63.7
A
typ.
DC Resistance
RDC
@ 20 °C
1.35
mΩ
typ.
DC Resistance
RDC
@ 20 °C
1.85
mΩ
max.
Self Resonant Frequency
fres
140
MHz
typ.
1)
refer to IEC 62024-2-2020
Certification:
12,1 ±0,3
9,5 ±0,5
Scale - 2:1
Schematic:
RoHS Approval
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
11,4 ±0,3
General Properties:
Ambient Temperature (referring
to IR)
-40 up to +75 °C
Operating Temperature
-40 up to +125 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Moisture Sensitivity Level (MSL)
1
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently
Test conditions of Performance Rated Current: refer to IEC 62024-2, Class D (PCB Copper Width:
40 mm; PCB Copper Thickness: 1000 µm)
Scale - 2:1
Temperature rise is highly dependent on many factors including PCB land pattern, trace size, and
proximity to other components. Therefore, temperature rise should be verified in application
conditions.
Product Marking:
Marking
Marking - Date Code
7443310047
YYWW
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ToF
004.000
2021-04-09
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-HCC SMT High Current Cube
Inductor
ORDER CODE
7443310047
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1210
eiSos
Valid
1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Typical Inductance vs. Current Characteristics:
Typical Temperature Rise vs. Current Characteristics:
0.50
100
IR
IRP
0.45
90
0.40
80
0.35
Temperature Rise [K]
Inductance [µH]
70
0.30
0.25
0.20
60
50
40
0.15
30
0.10
20
0.05
10
0
0.00
0.0
10.0
20.0
30.0
Current [A]
40.0
50.0
60.0
0
10
20
30
40
Current [A]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ToF
004.000
2021-04-09
DIN ISO 2768-1m
50
60
70
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-HCC SMT High Current Cube
Inductor
ORDER CODE
7443310047
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1210
eiSos
Valid
2/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel: [mm]
K0
D0
W3
E1
P0
A
P2
T
N
A
W
B
E2
B0
D
F
W1
close to center
C
Top Cover
Tape
A
D1
P1
T1
A0
W2
T2
End
Feeding direction
Start
detail B
Carrier Tape
Cover Tape
Cover Tape
B
Chip Cavity
Sprocket Hole
No Component
min.160 mm
Components
No Component
min. 100mm
Embossment
Cover Tape
min. 400mm
packaging is reffered to the international standard IEC 60286-3:2013
tolerance
value
A0
typ.
11,80
B0
typ.
12,60
W
+0,3/ -0,1
24,00
T
ref.
0,40
T1
max.
0,10
T2
typ.
11,00
K0
typ.
10,55
P0
±0,1
4,00
P1
±0,1
20,00
P2
±0,1
2,00
D0
+0,1/ -0,0
1,50
D1
min.
1,50
E1
±0,1
1,75
E2
min.
22,25
F
±0,1
11,50
Tape type 2a
Polystyrene
Packaging unit
pcs.
300
165° - 180°
24mm
A
± 2,0
330,00
B
min.
1,50
C
min.
12,80
D
min.
20,20
N
± 2,0
60,00
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
ToF
004.000
2021-04-09
DIN ISO 2768-1m
W1
+ 2,0
24,40
W2
max.
30,40
W3
min.
23,90
W3
max.
27,40
PROJECTION
METHOD
DESCRIPTION
Pull-of force
Tape width
Tolerance
Tape width
24 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WE-HCC SMT High Current Cube
Inductor
ORDER CODE
7443310047
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
1210
eiSos
Valid
3/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
