Dimensions: [mm]
Recommended Land Pattern: [mm]
Properties:
O 0,84
Properties
detail B
non plated
O0
,97
+0
-0,0,2
5,54
Brass
Surface
Tin
Unit
Tol.
min.
Solder Paste Thickness
120
µm
Tightening Torque
0.4
N*m max.
IR
Rated Current
3,33
0,2
suggested
solder pad
Value
Material
50
A
°
55
5,54
1,0
A
0,5
3,5
7,0
M 3
sectional drawing A-A
A
Stencil Suggestion:
0,5
B
General Information:
4,33
,5
R3
3,33
2,0
Operating Temperature
-55 up to +150 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Moisture Sensitivity Level (MSL)
1
Packaging
Tape and Reel
4,0
5,5
Scale - 3:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
WE
002.003
2022-02-16
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WP-SMRA REDCUBE
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
7466313R
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SMT Terminals right angled, M3/Ø 3.3 with Pin
eiCan
Valid
1/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape and Reel: [mm]
Packaging Specification - Reel: [mm]
K0
P0
A
P2
D1
T
E1
D0
W3
A0
A
A
C
P1
T1
W2
T2
Feeding direction
End
N
D
B
W
E2
B0
F
W1
close to center
Start
Carriertape
Cover Tape
detail B
B
Cover Tape
Chip Cavity
Sprocket Hole
NO COMPONENT
min. 160mm
COMPONENTS
NO COMPONENT
min. 100mm
COVER TAPE
min. 400mm
Embossment
Packaging is reffered to the international standard IEC 60286-3:2013
tolerance
size
7466313R
A0 B0 W
±0,1 ±0,1 +0,3/ -0,1
4,50 7,20 16,00
T
T1 T2 K0
P0 P1 P2 D0
+0,05 max. max. ±0,15 ±0,1 ±0,1 ±0,1 +0,1/ -0,0
0,40 0,1 9,5 8,50 4,00 8,00 2,00 1,50
D1 E1
E2
F
Tape Type
±0,1 ±0,1 min. ±0,1
1,50 1.75 14,25 7,50 Polystyrene
VPE / packaging unit
pcs.
1000
165° - 180°
tolerance
Tape width
16 mm
A
± 2,0
330,00
B
min.
1,50
C
min.
12,80
D
min.
20,20
N
min.
60,00
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
WE
002.003
2022-02-16
DIN ISO 2768-1m
W1
+2
16,40
W2
max.
22,40
W3
min.
15,90
W3
max.
19,40
PROJECTION
METHOD
DESCRIPTION
WP-SMRA REDCUBE
Pull-of force
Tape width
16 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
7466313R
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
SMT Terminals right angled, M3/Ø 3.3 with Pin
eiCan
Valid
2/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
60 - 150 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
20 - 30 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
8 minutes max.
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Volume mm³
