749020022A

Dimensions: [mm] Recommended Land Pattern: [mm] 1 50 50 26 1 25 10,9 25 26 1,02 0,4 ±0,1 2,03 9,65 0,76 1,02 ±0,1 24,48 no vias or traces underneath the component 27,75 Unless otherwise defined tolerance: ±0,10mm 8,5 Schematic: D1+ 1 0,9 ±0,2 0,25 ±0,1 h 0,1 1:1 CD1 2 D1- 3 D2+ 4 1:1 CD2 5 D2- 6 D3+ 7 1:1 CD3 8 7,8 D3- Unless otherwise defined tolerance: ±0,25mm 9 48 X1+ D5+ 14 49 CX1 CD5 15 50 X1- D5- 16 47 X2+ D6+ 17 46 CX2 CD6 18 45 X2- D6- 19 42 X3+ D7+ 20 43 CX3 CD7 21 1:1 35 X5+ 36 CX5 37 X51:1 34 X6+ 33 CX6 32 X61:1 29 X7+ 30 CX7 44 X3- D7- 22 41 X4+ D8+ 23 CD4 11 40 CX4 CD8 24 27 CX8 D4- 12 39 X4- D8- 25 26 X8- D4+ 10 1:1 31 X71:1 28 X8+ Scale - 1.5:1 Product Marking: Pin 1 Scale - 1,5:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JefL 004.000 2023-12-09 DIN ISO 2768-1m PROJECTION METHOD • DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000 Base-T SMT Transformer 2 Port ORDER CODE 749020022A BUSINESS UNIT STATUS PAGE eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical Properties: General Information: Properties Test conditions Value Unit Tol. Inductance 1) L 100 kHz/ 100 mV 350 µH min. Insulation Test Voltage VT 1 min. 1500 V (RMS) min. Insertion Loss IL 1-100 MHz -1 dB max. RoHS Approval Compliant [2011/65/EU&2015/863] Return Loss RL 1-30 MHz @ 100 Ω -18 dB min. REACh Approval Conform or declared [(EC)1907/2006] Return Loss RL 30-60 MHz @ 100 Ω -13 dB min. Return Loss RL 60-80 MHz @ 100 Ω -12 dB min. Return Loss RL 80-100 MHz @ 100 Ω -10 dB min. Differential to Common Mode Rejection Ratio DCMR 1-30 MHz -40 dB min. Differential to Common Mode Rejection Ratio DCMR 30-60 MHz -35 dB min. Differential to Common Mode Rejection Ratio DCMR 60-100 MHz -30 dB min. Crosstalk Crosstalk CT 1-60 MHz -33 dB min. CT 60-100 MHz -28 dB min. Common Mode Rejection Ratio CMRR 1-30 MHz -40 dB min. Common Mode Rejection Ratio CMRR 30-60 MHz -35 dB min. Common Mode Rejection Ratio CMRR 60-100 MHz -30 dB Turns Ratio n Data rate 1) 1:1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Certification: min. ±2% 1000 Base-T Pin 1-3; Pin 4-6 General Information: It is recommended that the temperature of the component does not exceed +85°C under worst case conditions Operating Temperature Storage Conditions (in original packaging) Moisture Sensitivity Level (MSL) -40 up to +85 °C < 40 °C ; < 75 % RH 1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JefL 004.000 2023-12-09 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000 Base-T SMT Transformer 2 Port ORDER CODE 749020022A BUSINESS UNIT STATUS PAGE eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] K0 P0 D0 P2 W3 T E A W C Top Cover Tape d S A B0 F B D1 A P1 T2 Feeding direction End W2 T1 D0 2 A0 N D W1 close to center Start detail B Carrier Tape Cover Tape Cover Tape B Chip Cavity Sprocket Hole Embossment No Component min. 160mm Components No Component min. 100mm Cover Tape min. 400mm Packaging is reffered to the international standard IEC 60286-3:2013 Tape Type 3 A0 B0 W T T1 T2 K0 P0 P1 P2 D0 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) typ. typ. ±0,3 ref. max. typ. typ. ±0,1 ±0,1 ±0,15 +0,1/ -0,0 11,60 28,30 44,00 0,40 0,10 9,40 8,90 4,00 20,00 2,00 1,50 D0 / 2 (mm) +0,05/ -0,0 0,75 D1 d E S F (mm) (mm) (mm) (mm) (mm) Material min. ±0,05 ±0,1 ±0,1 ±0,1 2,00 0,20 1,75 40,40 20,20 Polystyrene Qty. (pcs.) B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 80,00 W1 (mm) + 2,0 44,40 W2 (mm) max. 50,40 W3 (mm) min. 43,90 W3 (mm) max. 47,40 Material Polysytrene 330 165° -180° CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JefL 004.000 2023-12-09 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Pull-off force Tape width A (mm) ± 2,0 330,00 44 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000 Base-T SMT Transformer 2 Port ORDER CODE 749020022A BUSINESS UNIT STATUS PAGE eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³