7490220123

Dimensions: [mm] Recommended Land Pattern: [mm] 0,76 13 13 T F 1 0,5 ±0,1 12 14,48 24 24 2,29 12 16,0 ±0,25 1 1,5 ±0,13 1,27 ±0,1 1,27 13,97 no vias or traces underneath the component 17,55 ±0,25 14,7 ±0,25 0,25 ±0,1 A R Product Marking: Pin 1 Marking D Schematic: 8,8 ±0,25 h 0,1 Scale - 1,5:1 D1+ 2 CD1 1 D1- 3 D2+ 5 CD2 4 D2- 6 D3+ 8 CD3 7 1:1 23 X1+ 24 CX1 22 X1- 20 X2+ 21 CX2 19 X2- 17 X3+ 18 CX3 16 X3- 14 X4+ CD4 10 15 CX4 D4- 13 X4- 1:1 1:1 D3- 9 D4+ 11 1:1 12 Scale - 1.5:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JeLi 005.000 2022-05-02 DIN ISO 2768-1m PROJECTION METHOD • DESCRIPTION 7490220123 YYWW Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000BASE-T LAN Transformer with 4PPoE ORDER CODE 7490220123 BUSINESS UNIT STATUS PAGE eiSos Valid from 2022-05-02 due to PCN 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical Properties: Power over Ethernet Properties: Properties Test conditions Inductance L Value Unit Tol. Designed to support applications up to 1500 mA per centre tap. (Only pins 13-24) 100 kHz/ 100 mV @ 35 mA 180 µH min. Compliant with IEEE 802.3bt for 4PPoE (up to 1500mA each center tap) 100 kHz / 100 mV (Pins 13-24) 500 mΩ max. -1 dB max. DC Resistance RDC Insertion Loss IL 1-100 MHz Return Loss RL 1-30 MHz @ 100 Ω -16 dB min. RoHS Approval Return Loss RL 30-60 MHz @ 100 Ω -13.5 dB min. REACh Approval Return Loss RL 60-80 MHz @ 100 Ω -12 dB min. UL Approval Return Loss RL 80-100 MHz @ 100 Ω -10 dB min. cULus Approval Differential to Common Mode Rejection Ratio DCMR 1-30 MHz -40 dB min. Differential to Common Mode Rejection Ratio DCMR 30-60 MHz -35 dB min. Differential to Common Mode Rejection Ratio DCMR 60-100 MHz -30 dB min. Common Mode Rejection Ratio CMRR 1-30 MHz Common Mode Rejection Ratio CMRR 30-60 MHz Common Mode Rejection Ratio CMRR 60-100 MHz Crosstalk CT 1-60 MHz Crosstalk CT 60-100 MHz Insulation Test Voltage VT 1 min. Operating Temperature Moisture Sensitivity Level (MSL) dB min. -35 dB min. -30 dB min. -35 dB min. dB min. -30 -40 up to +105 °C Storage Conditions (in original packaging) A R -40 1500 General Information: D Certification: V (RMS) min. Compliant [2011/65/EU&2015/863] T F Conform or declared [(EC)1907/2006] AZOT2.E472316 [UL-62368] AZOT8.E472316 [UL-62368] < 40 °C ; < 75 % RH 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JeLi 005.000 2022-05-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000BASE-T LAN Transformer with 4PPoE ORDER CODE 7490220123 BUSINESS UNIT STATUS PAGE eiSos Valid from 2022-05-02 due to PCN 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 W3 T E A K0 P2 D0 d Feeding direction End No Component min. 160mm D Packaging is refered to the international standard IEC 60286-3:2013 Tape Type 3 A R A0 B0 W T T1 T2 K0 P0 P1 P2 D0 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) typ. typ. ±0,3 ref. max. typ. typ. ±0,1 ±0,1 ±0,1 +0,1/ -0,0 17,07 17,80 32,00 0,50 0,10 9,90 9,40 4,00 24,00 2,00 1,50 165° - 180° Pull-of force Tape width 32 mm T1 T2 Start Components 0,1 N - 1,3 N A W C Top Cover Tape D0 2 P1 A0 N F T F B S B0 D1 A D W1 close to center Carrier Tape Cover Tape detail B Cover Tape B Chip Cavity Sprocket Hole Embossment No Component min. 100mm Cover Tape min. 400m D0 / 2 (mm) +0,05/ -0,0 0,75 D1 d E S F (mm) (mm) (mm) (mm) (mm) Material min. ±0,05 ±0,1 ±0,1 ±0,1 2,00 0,20 1,75 28,40 14,20 Polystyrene Qty. (pcs.) A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) ± 2,0 80,00 W1 (mm) + 2,0 32,40 W2 (mm) max. 38,40 W3 (mm) min. 31,90 W3 (mm) max. 35,40 Material Polystyrene 290 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JeLi 005.000 2022-05-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000BASE-T LAN Transformer with 4PPoE ORDER CODE 7490220123 BUSINESS UNIT STATUS PAGE eiSos Valid from 2022-05-02 due to PCN 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Outer Carton: [mm] H IC IC A R L Tolerance Value D LIC (mm) WIC (mm) HIC (mm) typ. 345 typ. 345 typ. 45 No. of Reel (pcs.) 1 Qty. (pcs.) 290 IC T F W L C Material Paper C W H Packaging Specification - Reel in Carton: [mm] Tolerance Value C LC (mm) WC (mm) HC (mm) No. of Inner Carton (pcs.) Qty. (pcs.) Material typ. 400 typ. 370 typ. 370 8 2320 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JeLi 005.000 2022-05-02 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000BASE-T LAN Transformer with 4PPoE ORDER CODE 7490220123 BUSINESS UNIT STATUS PAGE eiSos Valid from 2022-05-02 due to PCN 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max 3 °C/ second max. T F 217 °C tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Time tL maintained above TL 6 °C/ second max. Time 25°C to peak temperature refer to IPC/ JEDEC J-STD-020E tS 60 - 120 seconds TL Ramp-down Rate (TP to TL) Ts min ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min A R 8 minutes max. Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time D Volume mm³