749023310

Dimensions: [mm] Recommended Land Pattern: [mm] 11,0 detail A A 0,08 ±0,076 1 13 24 1,88 1 1,0 ±0,15 0,64 4,1 ±0,25 0,45 ±0,15 X413 CX4 15 X4+ X3- 14 9 11 10 12 D4+ CD4 D4- 7 CD3 D3- 8 1:1 16 CX3 18 X3+ X2- 17 19 6 D3+ 3 D1- 1:1 21 4 CD2 X1- X2+ 20 22 1 CD1 1:1 5 24 23 1:1 D1+ 2 10,3 ±0,25 D2+ CX1 Schematic: X1+ 16,5 ±0,25 Scale - 2:1 D2- 12 12 8,88 0,225 ±0,075 CX2 24 1,0 ±0,15 13 1,0 Scale - 2:1 Product Marking: Pin 1 Marking CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaB 001.000 2020-02-27 DIN ISO 2768-1m PROJECTION METHOD • DESCRIPTION 749023310 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN AQ WE-LAN AQ 10/100/1000 Base-T SMT Transformer 1 Port ORDER CODE 749023310 BUSINESS UNIT STATUS PAGE eiSos Valid 1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical Properties: Power over Ethernet Properties: Properties Value Unit Tol. Designed to support applications up to 350 mA per centre tap. (Only pins 13-24) L Test conditions 100 kHz/ 100 mV @ 8 mA 180 µH min. Compliant with IEEE 802.3af DC Resistance 1 RDC 1 100 kHz/ 100 mV (D side) 3200 mΩ max. DC Resistance 2 RDC 2 100 kHz/ 100 mV (X side) 2500 mΩ max. Inductance Certification: Insertion Loss IL 1-100 MHz -1.1 dB max. RoHS Approval Compliant [2011/65/EU&2015/863] Return Loss RL 1-30 MHz @ 100 Ω -18 dB min. REACh Approval Conform or declared [(EC)1907/2006] Return Loss RL 30-60 MHz @ 100 Ω -14.4 dB min. Return Loss RL 60-80 MHz @ 100 Ω -12 dB min. Return Loss RL 80-100 MHz @ 100 Ω -10 dB min. Differential to Common Mode Rejection Ratio DCMR 1-30 MHz -35 dB min. Differential to Common Mode Rejection Ratio DCMR 30-60 MHz -35 dB min. Differential to Common Mode Rejection Ratio DCMR 60-100 MHz -30 dB min. Common Mode Rejection Ratio CMRR 1-30 MHz -30 dB min. Common Mode Rejection Ratio CMRR 30-60 MHz -30 dB min. Common Mode Rejection Ratio CMRR 60-100 MHz -22 dB min. Crosstalk CT 1-60 MHz -35 dB min. Crosstalk CT 60-100 MHz -35 dB min. Insulation Test Voltage VT 1 min. 1500 V (RMS) General Information: It is recommended that the temperature of the component does not exceed +85°C under worst case conditions Operating Temperature -40 up to +85 °C Storage Conditions (in original packaging) Moisture Sensitivity Level (MSL) < 40 °C ; < 75 % RH 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaB 001.000 2020-02-27 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN AQ WE-LAN AQ 10/100/1000 Base-T SMT Transformer 1 Port ORDER CODE 749023310 BUSINESS UNIT STATUS PAGE eiSos Valid 2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 P2 A W3 K0 T E D0 W C d B0 S A F B D1 A Top Cover Tape D0 2 P1 A0 N D W1 close to center T1 T2 detail B Feeding direction End No Component min.160mm Start Components Carrier Tape Cover Tape Cover Tape B No Component min. 100mm Chip Cavity Sprocket Hole Embossment Cover Tape min. 400mm Tape Type Tolerance Value 3 A0 (mm) ±0,1 15,30 B0 (mm) ±0,1 17,93 W (mm) ±0,3 32 T (mm) ±0,05 0,40 T1 (mm) ref. 0,10 T2 (mm) ±0,1 5,60 K0 (mm) ±0,1 4,80 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 24,00 P2 (mm) ±0,1 2,00 D0 (mm) +0,1/ -0,0 1,50 D0 / 2 (mm) +0,05/ -0,0 0,75 D1 (mm) min. 2 d (mm) ±0,05 0,20 E (mm) ±0,1 1,75 S (mm) ±0,1 28,40 F (mm) Material ±0,1 14,20 Polystyrene Qty. (pcs.) B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 80 W1 (mm) + 2,0 32,40 W2 (mm) max. 38,40 W3 (mm) min. 31,90 W3 (mm) max. 35,40 Material Polystyrene 400 165° - 180° CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaB 001.000 2020-02-27 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Pull-of force Tape width Tolerance Value A (mm) ± 2,0 330,00 32 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN AQ WE-LAN AQ 10/100/1000 Base-T SMT Transformer 1 Port ORDER CODE 749023310 BUSINESS UNIT STATUS PAGE eiSos Valid 3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min 60 - 120 seconds 3 °C/ second max. TL 217 °C Time tL maintained above TL tL 60 - 150 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp 20 - 30 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature 8 minutes max. refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Volume mm³