7490240120

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties 2,54 ±0,05 0,76 40 0,45 ±0,1 22 19 1 1,4 ±0,05 22 40 1,27 2,54 22,86 no vias or traces underneath the component 28,32 ±0,25 A R Schematic: 0,25 max. 12,7 ±0,25 Product Marking: Pin 1 Marking D 12,7 max. h 0,1 Scale - 1:1 1 CD1 1:1 40 X1+ 2 39 CX1 D1- 3 38 X1- D2+ 6 35 X2+ CD2 7 34 CX2 D2- 8 33 X2- D3+ 11 30 X3+ 1:1 1:1 CD3 12 29 CX3 D3- 13 28 X3- D4+ 16 25 X4+ 1:1 17 24 CX4 D4- 18 23 X4- Unit Tol. 350 µH min. 100 kHz/ 100 mV 1000 mΩ max. Insertion Loss IL 1-100 MHz -1.3 dB max. Return Loss RL 1-30 MHz @ 100 Ω -16 dB min. Return Loss RL 30-60 MHz @ 100 Ω -13 dB min. Return Loss RL 60-80 MHz @ 100 Ω -10 dB min. Return Loss RL 80-100 MHz @ 100 Ω -8 dB min. Differential to Common DCMR 1-30 MHz Mode Rejection Ratio 1) -30 dB min. Differential to Common DCMR 30-60 MHz Mode Rejection Ratio -30 dB min. Differential to Common DCMR 60-100 MHz Mode Rejection Ratio -30 dB min. Common Mode Rejection Ratio CMRR 1-30 MHz -30 dB min. Common Mode Rejection Ratio CMRR 30-60 MHz -30 dB min. Common Mode Rejection Ratio CMRR 60-100 MHz -30 dB min. -35 dB min. dB min. Crosstalk CT 1-60 MHz Crosstalk CT 60-100 MHz Insulation Test Voltage VT 1 min. Clearance distance Cl 2.5 mm Creepage distance Cr 4 mm 1) CD4 RDC Value 100 kHz/ 100 mV @ 8 mA T F Scale - 1:1 D1+ L DC Resistance 13,63 19 1,86 15,24 ±0,25 1,27 ±0,05 1 Test conditions Inductance -35 4000 V (RMS) min. The minimum values remain the same for CMRR • 7490240120 YYWW CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaB 002.000 2020-05-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000 Base-T SMT Transformer ORDER CODE 7490240120 BUSINESS UNIT STATUS PAGE eiSos Valid from 2020-05-08 due to PCN 1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. General Information: It is recommended that the temperature of the component does not exceed +85°C under worst case conditions Operating Temperature -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Fulfils IEC60601 requirements for 1xMOPP for working voltage up to 250 Vrms. Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Power over Ethernet Properties: Compliant with IEEE 802.3ab for 1000Base-T applications Certification: RoHS Approval Compliant [ 2011/65/EU&2015/863 ] REACh Approval Conform or declared [ (EC)1907/2006 ] A R Halogen Free Conform [ JEDEC JS709B ] Halogen Free Conform [ IEC 61249-2-21 ] cULus Approval E472316 [ UL-60601 ] D T F CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaB 002.000 2020-05-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000 Base-T SMT Transformer ORDER CODE 7490240120 BUSINESS UNIT STATUS PAGE eiSos Valid from 2020-05-08 due to PCN 2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape and Reel: [mm] P0 K0 P2 W3 T E D0 A A0 T2 A R Carrier Tape Feeding direction End No Component min. 160mm Tape Type 3 Components D Start 44 mm A detail B Cover Tape B Cover Tape Chip Cavity Sprocket Hole Embossment D0 / 2 (mm) +0,05/ -0,0 0,75 D1 d E S F (mm) (mm) (mm) (mm) (mm) Material min. ±0,05 ±0,1 ±0,1 ±0,1 2,00 0,20 1,75 40,40 20,20 Polystyrene Qty. (pcs.) A (mm) ± 2,0 330,00 B (mm) min. 1,50 C (mm) min. 12,80 D (mm) min. 20,20 N (mm) min. 80,00 W1 (mm) + 2,0 44,40 W2 (mm) max. 50,40 W3 (mm) min. 43,90 W3 (mm) max. 47,40 Material Polysytrene 200 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE JaB 002.000 2020-05-08 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Pull-of force Tape width W2 No Component min. 100mm Cover Tape min. 400m A0 B0 W T T1 T2 K0 P0 P1 P2 D0 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) typ. typ. ±0,3 ref. max. typ. typ. ±0,1 ±0,1 ±0,15 +0,1/ -0,0 15,60 28,58 44,00 0,50 0,10 13,40 12,90 4,00 24,00 2,00 1,50 165° -180° N W Top Cover Tape T1 D0 2 P1 T F C d D1 A D B S B0 F W1 close to center 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WE-LAN 1000 Base-T SMT Transformer ORDER CODE 7490240120 BUSINESS UNIT STATUS PAGE eiSos Valid from 2020-05-08 due to PCN 3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max Time tL maintained above TL 3 °C/ second max. T F TL 217 °C tL 60 - 150 seconds Tp see table below Time within 5°C of actual peak temperature tp 20 - 30 seconds 6 °C/ second max. Time 25°C to peak temperature refer to IPC/ JEDEC J-STD-020E tS 60 - 120 seconds Peak package body temperature Ramp-down Rate (TL to TP) Ts min ts Ramp-up Rate (TL to TP) Liquidous Temperature tL Preheat Area TC –5°C Value Preheat Temperature Min A R 8 minutes max. Package Classification Reflow Temperature: Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C ≥ 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time D Volume mm³